radio Lexus ES350 2007 Audio/video System

177
ES350_Navi_U (L/O 0603)
AUDIO/VIDEO SYSTEM
Selecting a channel
Tune in the desired channel using one of
the following methods.
Preset tuning: Touch the channel selec-
tor touch-screen button (1 Ð 6) for the
channel you want. The touch-screen but-
ton (1 Ð 6) is highlighted and channel
number appears on the display.
To select channel within the current
category: Push the 
º or º button of
SEEK/TRACKº.To scan the currently selected channel
category: Touch TYPE SCANº or push
the SCANº button briefly. SCANº ap-
pears on the display. The radio will find the
next channel in the same channel catego-
ry, stay there for a few seconds, and then
scan again. To select a channel, touch
TYPE SCANº or push the SCANº but-
ton a second time.
To scan the preset channels: Push the
SCANº button and hold it until you hear
a beep. P.SCANº appears on the display.
The radio will find the next preset channel,
stay there for a few seconds, and then
move to the next preset channel. To select
a channel, push the SCANº button a sec-
ond time.

179
ES350_Navi_U (L/O 0603)
AUDIO/VIDEO SYSTEM
If the satellite radio tuner malfunctions
When problems occur with the XM tuner, a message will appear on the display. Refer-
ring to the table below to identify the problem, take the suggested corrective action.
ANTENNA
The XM antenna is not connected. Check whether the XM antenna
cable is attached securely.
ANTENNAA short circuit occurs in the antenna or the surrounding antenna cable.
See a Lexus certified dealer for assistance.
UPDATING
You have not subscribed to the XM Satellite Radio. The radio is being
updated with the latest encryption code. Contact the XM Satellite
Radio for subscription information. When a contract is canceled, you
can choose the CH000º and all free-to-air channels.
UPDATINGThe premium channel you selected is not authorized. Wait for about 2
seconds until the radio returns to the previous channel or CH001º. If
it does not change automatically, select another channel. If you want
to listen to the premium channel, contact the XM Satellite Radio.
NO
SIGNALThe XM signal is too weak at the current location. Wait until your ve-
hicle reaches a location with a stronger signal.
LOADINGThe unit is acquiring audio or program information. Wait until the unit
has received the information.
OFF AIRThe channel you selected is not broadcasting any programming. Select
another channel.
-----There is no song/program title or artist name/feature associated with the
channel at that time. No action needed.
---The channel you selected is no longer available. Wait for about 2 sec-
onds until the radio returns to the previous channel or CH001º. If it does
not change automatically, select another channel.
The XM Listener Care Center is also available on the phone, please call 1-800-XM-
RADIO (1-877-515-3987) during the following hours:
Monday Ð Saturday: 6 a.m. Ð 2 a.m. Sunday: 8 p.m. Ð 8 a.m. (ET)

180AUDIO/VIDEO SYSTEM
ES350_Navi_U (L/O 0603)
NOTICE
This equipment has been tested and
found to comply with the limits for a
class B digital device, pursuant to
Part 15 of the FCC Rules. These lim-
its are designed to provide reason-
able protection against harmful inter-
ference in a residential installation.
This equipment generates, uses and
can radiate radio frequency energy
and, if not installed and used in ac-
cordance with the instructions, may
cause harmful interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television re-
ception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct
the interference by one or more of the
following measures:
Ð Reorient or relocate the receiving
antenna.
Ð Increase the separation between
the equipment and receiver.
Ð Connect the equipment into an
outlet on a circuit different from that
to which the receiver is connected.
Ð Consult the dealer or an experi-
enced radio/TV technician for help.
Information to user
Alternation or modifications carried
out without appropriate authoriza-
tion may invalidate the user's right to
operate the equipment.
INFORMATION
This XM tuner supports Audio Ser-
vicesº (Music and Talk) of only XMSatellite Radio and Text Informa-
tionº* linked to the respective Audio
Servicesº.
*Text Information includes, Station
Name, (Artist) Name, (Song) Title and
Category Name.

220AUDIO/VIDEO SYSTEM
ES350_Navi_U (L/O 0603)
1Volume control switch
Push +º side to increase the volume. The
volume continues to increase while the
switch is being pressed.
Push -º side to decrease the volume.
The volume continues to decrease while
the switch is being pressed.
2º º switches
Radio
To select a preset station:
Quickly push and release the 
º or º
switch. Do this again to select the next pre-
set station.
To seek a station:
Push and hold the 
º or º switch until
you hear a beep. Do this again to find the
next station. If you push either the 
º or
º switch in seek mode, the seek mode
will cancel.
Cassette tape player
To skip to a different track in either direc-
tion:
Quickly push and release the 
º or º
switch. FF 1º or REW 1º will appear on
the display.
Next, push the 
º or º switch until the
track you want to listen to is set. If you
push the switch ten times, the skip function
will turn off. (You can skip up to nine tracks
at a time.)
When counting the number of the tracks
you want to rewind, remember to count the
current track as well. For example, if you
want to rewind to a song that is two before
the song you are listening to, push the 
º
button three times.
If you push the switch further than you
wanted to, push the other side of the
switch. The track number will be increased
or reduced.The track number you select is not valid if
it is higher than the number of the tracks re-
maining on the current side of the cassette.
When the tape reaches to the begin-
ning, the player will automatically start
playing that side.
After the tape reaches to the end, the
player will automatically reverse and
start playing the other side.
There must be at least 3 seconds of blank
space between tracks for the switch to
work correctly. In addition, the feature may
not work well with some spoken, live, or
classical recordings.
To fast-forward or reverse:
Push and hold the 
º switch to fast-for-
ward a cassette tape. FFº will appear on
the display. Push and hold the 
º switch
to rewind a tape. REWº will appear on the
display.
To stop the tape while it is fast-forwarding,
push the 
º switch . To stop the tape
while it is rewinding, push the º switch.
If a tape rewinds completely, the cassette
tape player will stop and then play that
same side. If a tape fast-forwards com-
pletely, the cassette will play the other side
of the tape using the auto-reverse feature.
CD changer or DVD changer
Use this button to skip up or down to a dif-
ferent track, file or chapter in either direc-
tion.
To select a desired track, file or chapter:
Quickly push and release the 
º or º
switch until the track, file or chapter you
want to play is set. If you want to return to
the beginning of the current track, file or
chapter, push the 
º switch once, quick-
ly.
To select a desired disc:
Push and hold the 
º or º switch until
you hear a beep to change to the next or
the previous disc. Repeat this operation
until you reach the disc you want to listen
to.

221
ES350_Navi_U (L/O 0603)
AUDIO/VIDEO SYSTEM
3MODEº switch
Each time you push the MODEº switch,
the system changes the audio mode.
To turn the audio/video system on, push
the MODEº switch.
To turn the audio/video system off, push
and hold the MODEº switch until you hear
a beep.
NOTICE
To ensure correct audio/video sys-
tem operations:
Be careful not to spill beverages
over the audio/video system.
Do not put anything other than a
cassette tape or appropriate discs
into the cassette tape slot, CD
changer or DVD changer slot.
The use of a cellular phone inside
or near the vehicle may cause a
noise from the speakers of the
audio/video system which you are
listening to. However, this does
not indicate a malfunction.
Radio reception
Usually, the problem with radio reception
does not mean there is a problem with your
radio - it is just the normal result of condi-
tions outside the vehicle.
For example, nearby buildings and terrain
can interfere with FM reception. Power
lines or telephone wires can interfere with
AM signals. And of course, radio signals
have a limited range, and the farther you
are from a station, the weaker its signal will
be. In addition, reception conditions
change constantly as your vehicle moves.
Here are some common reception prob-
lems that probably do not indicate a prob-
lem with your radio:
Audio / video system
operating hints

222AUDIO/VIDEO SYSTEM
ES350_Navi_U (L/O 0603)
FM
Fading and drifting stations Ð General-
ly, the effective range of FM is about 40 km
(25 miles). Once outside this range, you
may notice fading and drifting, which in-
crease with the distance from the radio
transmitter. They are often accompanied
by distortion.
Multi-path Ð FM signals are reflective,
making it possible for two signals to reach
your antenna at the same time. If this hap-
pens, the signals will cancel each other
out, causing a momentary flutter or loss of
reception.
Static and fluttering Ð These occur
when signals are blocked by buildings,
trees, or other large objects. Increasing
the bass level may reduce static and flut-
tering.
Station swapping Ð If the FM signal you
are listening to is interrupted or weakened,
and there is another strong station nearby
on the FM band, your radio may tune in the
second station until the original signal can
be picked up again.
AM
Fading Ð AM broadcasts are reflected by
the upper atmosphere Ð especially at
night. These reflected signals can inter-
fere with those received directly from the
radio station, causing the radio station to
sound alternately strong and weak.
Station interference Ð When a reflected
signal and a signal received directly from
a radio station are very nearly the same
frequency, they can interfere with each
other, making it difficult to hear the broad-
cast.
Static Ð AM is easily affected by external
sources of electrical noise, such as high
tension power lines, lightening, or electri-
cal motors. This results in static.CARING FOR YOUR CASSETTE TAPE
PLAYER AND TAPES
For high performance from your cassette
tape player and tapes:
Clean the tape head and other parts regu-
larly.
A dirty tape head or tape path can de-
crease sound quality and tangle your
cassette tapes. The easiest way to
clean them is by using a cleaning tape.
(A wet type is recommended.)
Use high-quality cassettes:
Low-quality cassette tapes can cause
many problems, including poor sound,
inconsistent playing speed, and
constant auto-reversing. They can
also get stuck or tangled in the cassette
tape player.
Do not use a cassette if it has been
damaged or tangled or if its label is
peeling off.
Do not leave a cassette in the player if
you are not listening to it, especially if
it is hot outside.
Store cassettes in their cases and out
of direct sunlight.
Avoid using cassettes with a total play-
ing time longer than 100 minutes (50
minutes per side). The tape used in
these cassettes is thin and could get
stuck or tangled in the cassette tape
player.