CD changer Lexus ES350 2007 Audio/video System

199
ES350_Navi_U (L/O 0603)
AUDIO/VIDEO SYSTEM
2. Insert only one disc while the DVD
changer door is open.
You can set a disc at the lowest empty disc
number.
After insertion, the set disc is automatically
loaded.
If the label faces down, the disc cannot be
played. In this case, DISC
Checkº ap-
pears on the screen.
If you do not insert the disc within 15 sec-
onds after pushing the LOADº button, the
beep will sound and the operation will be
canceled automatically.
If you need to insert the next disc, repeat
the same procedure to insert another disc.
Setting all the discs:
1. Push the LOADº button until you
hear a beep.
The amber indicators at both ends of the
slot start blinking. After the amber indica-
tors change to green and stay on, the DVD
changer door will open.
2. Insert only one disc while the DVD
changer door is open.
The DVD changer door closes and the am-
ber indicators start blinking.

200AUDIO/VIDEO SYSTEM
ES350_Navi_U (L/O 0603)
3. Insert the next disc after the amber
indicators change to green and stay on
and the DVD changer door opens.
4. Repeat this procedure until you in-
sert all the discs.
To cancel the operation, push the LOADº
or DISC´AUXº button.
If you do not insert the discs within 15 sec-
onds after pushing the LOADº button, the
beep will sound and the operation will be
canceled automatically.
NOTICE
Do not insert one disc stacked on top
of another one or feed them in contin-
uously, to prevent discs from getting
stuck in the changer.
Ejecting a single alone:
1. Push the º or º button of CH/
DISCº or touch the disc number button
on the screen to highlight the disc num-
ber you want to eject.
2. Push the button for the disc
briefly.
At this time, the amber indicators of the slot
start blinking and the disc is ejected.
3. After the blinking indicators stay on,
remove the disc.

201
ES350_Navi_U (L/O 0603)
AUDIO/VIDEO SYSTEM
Ejecting all the discs:
1. Push the button for the disc un-
til you hear a beep.
At this time, the amber indicators of the slot
start blinking and a disc is ejected.
2. After the blinking indicators stay on,
remove the disc.
The indicators start blinking again and the
next disc is ejected.
To cancel the operation, push the LOADº
or DISC´AUXº button.
If you do not remove the disc within 15 sec-
onds after it is ejected, the beep will sound
and the operation will be canceled auto-
matically.
When all the discs are removed, the indi-
cators go out.
The numbers of the trays where the disc is
not set are dimmed.(b) Playing a disc
Push the DISC´AUXº button if the disc
are already loaded in the DVD changer.
The DVD CHANGERº screen will be dis-
played.
The discs set in the DVD changer are
played continuously, starting with the last
disc you inserted. The disc number of the
disc currently being played, the track or
title and chapter number and the time from
the beginning of the program are shown on
the display.
Audio disc and MP3/WMA disc only Ð
When play of one disc ends, the first track
of the following disc starts. When play of
the final disc ends, play of the first disc
starts again.
The changer will skip any empty disc trays.

202AUDIO/VIDEO SYSTEM
ES350_Navi_U (L/O 0603)
(c) Selecting a desired disc
On the screen:
Touch the desired disc number.
The selected disc number is highlighted.
The changer will start playing the selected
disc from the first track.
On the audio panel:
Push the 
º or º button of CH/
DISCº.
When you release the button, the changer
will start playing the selected disc from the
first track.(d) Operating a DVD disc
NOTE: The playback condition of some
DVD discs may be determined by a DVD
software producer. This DVD changer
plays a disc as the software producer in-
tended. So some functions may not work
properly. Be sure to read the instruction
manual for the DVD disc separately pro-
vided. For the detailed information about
DVD video discs, see (g) DVD player and
DVD video disc informationº on page 217.
Precautions on DVD video disc
When recording with a DVD video, DVD
audio or video CD, audio tracks may not
record in some cases while the menu is
displayed. As audio will not play in this
case, verify that the video tracks are play-
ing and then activate playback.
When playback of a disc is completed:
If an audio CD or MP3/WMA disc is
playing, the first track or file starts.
If a DVD video, DVD audio or video CD
is playing, playback will stop or the
menu screen will be displayed.
The title/chapter number and playback
time display may not appear while playing
back certain DVD video discs.
CAUTION
Conversational speech on some
DVDs is recorded at a low volume to
emphasize the impact of sound ef-
fects. If you adjust the volume as-
suming that the conversations repre-
sent the maximum volume level that
the DVD will play, you may be startled
by louder sound effects or when you
change to a different audio source.
The louder sounds may have a signif-
icant impact on the human body or
pose a driving hazard. Keep this in
mind when you adjust the volume.

206AUDIO/VIDEO SYSTEM
ES350_Navi_U (L/O 0603)
Selecting a menu item
Enter the menu item using ,
,  and
 buttons and touch Enterº.
The changer starts playing video for that
menu item. (For details, see the manual
that comes with the DVD video disc pro-
vided separately.)
Each time you touch Move Buttonsº, the
controls on the screen move upward and
downward.
When you touch < will disappear. To display them again,
touch >>ONº.
When you touch
, the previous
screen returns.
Searching by title
DVD video only Ð
Enter the title number and touch En-
terº.
The player starts playing video for that title
number.
When you push the 
º or º button of
SEEK/TRACKº, you can select a chap-
ter.
If you enter the wrong numbers, touch
Clearº to delete the numbers.
When you touch
, the previous
screen returns.

207
ES350_Navi_U (L/O 0603)
AUDIO/VIDEO SYSTEM
Searching by track
DVD audio only Ð
Enter the track numbers on the search-
ing track screen and touch Enterº.
The changer starts playing video for that
title number.
You can select a track number by pushing
the 
º or º button of SEEK/
TRACKº.
If you enter the wrong numbers, touch
Clearº to delete the numbers.
Touch
, and the previous screen re-
turns.
Searching by group
DVD audio only Ð
Enter the group number and touch En-
terº.
The selected group number will appear on
the screen.
The changer starts playing the disc from
the entered group number.
When you push the 
º or º button of
SEEK/TRACKº, you can select a track.
If you enter the wrong numbers, touch
Clearº to delete the numbers.
When you touch
, the previous
screen returns.

208AUDIO/VIDEO SYSTEM
ES350_Navi_U (L/O 0603)
Selecting the bonus group
DVD audio only Ð
Enter the bonus group number on the
searching group screen and touch En-
terº.
The Enter Key Codeº screen will appear.
To enter the number of the group you want
to play, push the group number.
If you enter the wrong number, touch  to
delete the number.
Touch Enterº on the screen.
The changer starts playing the disc from
the selected bonus group number.
Changing the still picture
DVD audio only Ð
Touch Prev. Stillº or Next Stillº on the
screen to forward or reverse the still
pictures.

216AUDIO/VIDEO SYSTEM
ES350_Navi_U (L/O 0603)
Description of each button
BUTTONS ON TOP PAGE
Select Numberº: The track or number
search screen appears. (See page 216.)
Returnº: Touching this will display the
predetermined scene and start playing
from there.
Prev. Menuº: When you touch this button
while the disc menu is displayed, the pre-
vious page appears on the screen. If you
touch this button while the changer is play-
ing video, the previous track is searched
and played.
Next Menuº: When you touch this button
while the disc menu is displayed, the next
page appears on the display. If you touch
this button while the changer is playing vid-
eo, the next track is searched and played.
Main/Subº: A multiplex transmission
changing button. The mode changes from
Main/Sub to Main, to Sub and back to
Main/Sub by touching this button.
BUTTONS ON SECOND PAGE
: Use this button to pause the video
screen.
: Touch this button to fast reverse
during playback.
: Touch this button during pause to
resume playing.
: Touch this button to fast forward
during the playback. During pause, touch
this button briefly to advance frame by
frame, or touch and hold it to play slowly.
Searching by track
Enter the track numbers on the search-
ing track screen and touch Enterº.
The changer starts playing video for that
title number.
You can select a track number by pushing
the 
º or º button of SEEK/
TRACKº.
If you enter the wrong numbers, touch
Clearº to delete the numbers.
Touch
, and the previous screen re-
turns.

217
ES350_Navi_U (L/O 0603)
AUDIO/VIDEO SYSTEM
(f) If the changer malfunctions
If the changer or another unit equipped
with the changer malfunction, your audio/
video system will display following mes-
sages.
If No Discº appears on the display: It
indicates that there is no disc in the DVD
changer.
If DISC
Checkº appears on the dis-
play: It indicates that the disc dirty, dam-
aged, or it was inserted upside down.
Clean the disc or insert it correctly. If a disc
which is not playable is inserted, DISC

Checkº will also appear on the screen. For
appropriate discs for this player, see Au-
dio/video system operating hintsº on page
221.
If Region Code Errorº appears on the
display: It indicates that the DVD region
code is not set properly.
If DVD Errorº appears on the display:
The following causes are possible.
There is a trouble inside the system.
Eject the disc.
The inside of the changer unit may be
too hot due to the very high ambient
temperature. Eject the disc and allow
the changer to cool down.
If NO MUSIC FILEº appears on the dis-
play: It indicates that the disc has no play-
able data.
If the malfunction is not rectified: Take
your vehicle to your dealer.
If an MP3/WMA disc contains CD-DA
files, only CD-DA files are played. If an
MP3/WMA disc contains files other than
CD-DA, only MP3/WMA files are played.(g) DVD player and DVD video disc in-
formation
DVD video discs
This DVD player conforms to NTSC color
TV formats.
Region codes: Some DVD video discs
have a region code indicating a country
where you can use the DVD video disc on
this DVD player. If the DVD video disc is
not labeled as ALLº or 1º, you cannot use
it on this DVD player. If you attempt to play
an inappropriate DVD video disc on this
player, Region Code Errorº appears on
the display. Even if the DVD video disc
does not have a region code, there is a
case that you cannot use it.

220AUDIO/VIDEO SYSTEM
ES350_Navi_U (L/O 0603)
1Volume control switch
Push +º side to increase the volume. The
volume continues to increase while the
switch is being pressed.
Push -º side to decrease the volume.
The volume continues to decrease while
the switch is being pressed.
2º º switches
Radio
To select a preset station:
Quickly push and release the 
º or º
switch. Do this again to select the next pre-
set station.
To seek a station:
Push and hold the 
º or º switch until
you hear a beep. Do this again to find the
next station. If you push either the 
º or
º switch in seek mode, the seek mode
will cancel.
Cassette tape player
To skip to a different track in either direc-
tion:
Quickly push and release the 
º or º
switch. FF 1º or REW 1º will appear on
the display.
Next, push the 
º or º switch until the
track you want to listen to is set. If you
push the switch ten times, the skip function
will turn off. (You can skip up to nine tracks
at a time.)
When counting the number of the tracks
you want to rewind, remember to count the
current track as well. For example, if you
want to rewind to a song that is two before
the song you are listening to, push the 
º
button three times.
If you push the switch further than you
wanted to, push the other side of the
switch. The track number will be increased
or reduced.The track number you select is not valid if
it is higher than the number of the tracks re-
maining on the current side of the cassette.
When the tape reaches to the begin-
ning, the player will automatically start
playing that side.
After the tape reaches to the end, the
player will automatically reverse and
start playing the other side.
There must be at least 3 seconds of blank
space between tracks for the switch to
work correctly. In addition, the feature may
not work well with some spoken, live, or
classical recordings.
To fast-forward or reverse:
Push and hold the 
º switch to fast-for-
ward a cassette tape. FFº will appear on
the display. Push and hold the 
º switch
to rewind a tape. REWº will appear on the
display.
To stop the tape while it is fast-forwarding,
push the 
º switch . To stop the tape
while it is rewinding, push the º switch.
If a tape rewinds completely, the cassette
tape player will stop and then play that
same side. If a tape fast-forwards com-
pletely, the cassette will play the other side
of the tape using the auto-reverse feature.
CD changer or DVD changer
Use this button to skip up or down to a dif-
ferent track, file or chapter in either direc-
tion.
To select a desired track, file or chapter:
Quickly push and release the 
º or º
switch until the track, file or chapter you
want to play is set. If you want to return to
the beginning of the current track, file or
chapter, push the 
º switch once, quick-
ly.
To select a desired disc:
Push and hold the 
º or º switch until
you hear a beep to change to the next or
the previous disc. Repeat this operation
until you reach the disc you want to listen
to.