change time Lexus ES350 2008 Audio/video System

AUDIO/VIDEO SYSTEM
237 
Changing the angle
The angle can be selected for discs that
are multi-angle compatible when the
angle mark appears on the screen.
Each time you touch Angleº, the angle
changes.
When you touch
, the previous
screen returns.
Setup menu
The initial setting can be changed.
After you change the initial setting, touch
Enterº. The previous picture will be dis-
played.
When Defaultº is touched, all menus are
initialized.
AUDIO LANGUAGE
You can change the audio language.
1. Touch Audio Languageº.
2. Touch the language you want to
hear on the Select Audio Languageº
screen.
If you cannot find the language you want to
hear on this screen, touch Otherº and en-
ter a language code. For the entry of lan-
guage code, see page 239.

AUDIO/VIDEO SYSTEM
238
SUBTITLE LANGUAGE
You can change the subtitle language.
1. Touch Subtitle Languageº.
2. Touch a language you want to read
on the Select Subtitle Languageº
screen.
If you cannot find the language you want to
read on this screen, touch Otherº and en-
ter a language code. For the entry of lan-
guage code, see page 239.
To return to the Setup Menuº screen,
touch
.
DVD LANGUAGE
You can change the language on the DVD
video menu.
1. Touch DVD Languageº.
2. Touch the language you want to
read on the DVD Languageº screen.
If you cannot find the language you want to
read on this screen, touch Otherº and en-
ter a language code. For the entry of lan-
guage code, see page 239.
To return to the Setup Menuº screen,
touch
.ANGLE MARK
The multi-angle mark can be turned on or
off on the screen while the disc which is
multi-angle compatible is being played.
Each time you touch Angle Markº, the
angle mark on the screen turns on or off al-
ternately.
PARENTAL LOCK
The level of viewer restrictions can be
changed.
1. Touch Parental Lockº.
2. Enter the 4-digit personal code on
the Enter Personal Codeº screen.
If you enter the wrong numbers, touch
Clearº to delete the numbers.
10 touches of Clearº will initialized the
personal code.
3. Touch a parental level (1 Ð 8) on the
Restriction Levelº.
To return to the Setup Menuº screen,
touch
.

AUDIO/VIDEO SYSTEM
247
The track number you select is not valid if
it is higher than the number of the tracks re-
maining on the current side of the cassette.
When the tape reaches to the begin-
ning, the player will automatically start
playing that side.
After the tape reaches to the end, the
player will automatically reverse and
start playing the other side.
There must be at least 3 seconds of blank
space between tracks for the switch to
work correctly. In addition, the feature may
not work well with some spoken, live, or
classical recordings.
To fast-forward or reverse:
Push and hold the 
º switch to fast-for-
ward a cassette tape. FFº will appear on
the display. Push and hold the 
º switch
to rewind a tape. REWº will appear on the
display.
To stop the tape while it is fast-forwarding,
push the 
º switch . To stop the tape
while it is rewinding, push the º switch.
If a tape rewinds completely, the cassette
tape player will stop and then play that
same side. If a tape fast-forwards com-
pletely, the cassette will play the other side
of the tape using the auto-reverse feature.
CD changer or DVD changer
Use this button to skip up or down to a dif-
ferent track, file or chapter in either direc-
tion.
To select a desired track, file or chapter:
Quickly push and release the 
º or º
switch until the track, file or chapter you
want to play is set. If you want to return to
the beginning of the current track, file or
chapter, push the 
º switch once, quick-
ly.
To select a desired disc:
Push and hold the 
º or º switch until
you hear a beep to change to the next or
the previous disc. Repeat this operation
until you reach the disc you want to listen
to.
3MODEº switch
Each time you push the MODEº switch,
the system changes the audio mode.
To turn the audio/video system on, push
the MODEº switch.
To turn the audio/video system off, push
and hold the MODEº switch until you hear
a beep.

AUDIO/VIDEO SYSTEM
248
NOTICE
To ensure correct audio/video sys-
tem operations:
Be careful not to spill beverages
over the audio/video system.
Do not put anything other than a
cassette tape or appropriate discs
into the cassette tape slot, CD
changer or DVD changer slot.
The use of a cellular phone inside
or near the vehicle may cause a
noise from the speakers of the
audio/video system which you are
listening to. However, this does
not indicate a malfunction.
Radio reception
Usually, the problem with radio reception
does not mean there is a problem with your
radio - it is just the normal result of condi-
tions outside the vehicle.
For example, nearby buildings and terrain
can interfere with FM reception. Power
lines or telephone wires can interfere with
AM signals. And of course, radio signals
have a limited range, and the farther you
are from a station, the weaker its signal will
be. In addition, reception conditions
change constantly as your vehicle moves.
Here are some common reception prob-
lems that probably do not indicate a prob-
lem with your radio:FM
Fading and drifting stations Ð General-
ly, the effective range of FM is about 40 km
(25 miles). Once outside this range, you
may notice fading and drifting, which in-
crease with the distance from the radio
transmitter. They are often accompanied
by distortion.
Multi-path Ð FM signals are reflective,
making it possible for two signals to reach
your antenna at the same time. If this hap-
pens, the signals will cancel each other
out, causing a momentary flutter or loss of
reception.
Static and fluttering Ð These occur
when signals are blocked by buildings,
trees, or other large objects. Increasing
the bass level may reduce static and flut-
tering.
Station swapping Ð If the FM signal you
are listening to is interrupted or weakened,
and there is another strong station nearby
on the FM band, your radio may tune in the
second station until the original signal can
be picked up again.
AM
Fading Ð AM broadcasts are reflected by
the upper atmosphere Ð especially at
night. These reflected signals can inter-
fere with those received directly from the
radio station, causing the radio station to
sound alternately strong and weak.
Station interference Ð When a reflected
signal and a signal received directly from
a radio station are very nearly the same
frequency, they can interfere with each
other, making it difficult to hear the broad-
cast.
Static Ð AM is easily affected by external
sources of electrical noise, such as high
tension power lines, lightening, or electri-
cal motors. This results in static.
Audio / video system
operating hints