display Lexus ES350 2008 Audio/video System

AUDIO/VIDEO SYSTEM
203 
Selecting a channel
Tune in the desired channel using one of
the following methods.
Preset tuning: Touch the channel selec-
tor touch-screen button (1 Ð 6) for the
channel you want. The touch-screen but-
ton (1 Ð 6) is highlighted and channel
number appears on the display.
To select channel within the current
category: Push the 
º or º button of
SEEK/TRACKº.To scan the currently selected channel
category: Touch TYPE SCANº or push
the SCANº button briefly. SCANº ap-
pears on the display. The radio will find the
next channel in the same channel catego-
ry, stay there for a few seconds, and then
scan again. To select a channel, touch
TYPE SCANº or push the SCANº but-
ton a second time.
To scan the preset channels: Push the
SCANº button and hold it until you hear
a beep. P.SCANº appears on the display.
The radio will find the next preset channel,
stay there for a few seconds, and then
move to the next preset channel. To select
a channel, push the SCANº button a sec-
ond time.

AUDIO/VIDEO SYSTEM
204 
Displaying the title and name
When you touch TEXTº, the song/pro-
gram title and the artist name/feature are
displayed.
Up to 10 alphanumeric characters can be
displayed. (Some information will not be
fully displayed.)
When you touch TEXTº again, the dis-
play returns.

AUDIO/VIDEO SYSTEM
205 
If the satellite radio tuner malfunctions
When problems occur with the XM tuner, a message will appear on the display. Refer-
ring to the table below to identify the problem, take the suggested corrective action.
ANTENNA
The XM antenna is not connected. Check whether the XM antenna
cable is attached securely.
ANTENNAA short circuit occurs in the antenna or the surrounding antenna cable.
See a Lexus certified dealer for assistance.
UPDATING
You have not subscribed to the XM Satellite Radio. The radio is being
updated with the latest encryption code. Contract the XM Satellite
Radio for subscription information. When a contract is canceled, you
can choose the CH000º and all free-to-air channels.
UPDATINGThe premium channel you selected is not authorized. Wait for about 2
seconds until the radio returns to the previous channel or CH001º. If
it does not change automatically, select another channel. If you want
to listen to the premium channel, contact the XM Satellite Radio.
NO
SIGNALThe XM signal is too weak at the current location. Wait until your ve-
hicle reaches a location with a stronger signal.
LOADINGThe unit is acquiring audio or program information. Wait until the unit
has received the information.
OFF AIRThe channel you selected is not broadcasting any programming. Select
another channel.
-----There is no song/program title or artist name/feature associated with the
channel at that time. No action needed.
---The channel you selected is no longer available. Wait for about 2 sec-
onds until the radio returns to the previous channel or CH001º. If it does
not change automatically, select another channel.
Contact the XM Listener Care Center at 1 - 877 - 515 - 3987 (U.S.A.) or 1 - 877 - 438
- 9677 (Canada).

AUDIO/VIDEO SYSTEM
207 
Setting a cassette tape
When you insert a cassette tape, the ex-
posed tape should face to the right.
The player will automatically start when
you insert a cassette tape. At this time,
TAPEº appears on the display.
If a metal or chrome equivalent cassette
tape is put in the cassette player, the player
will automatically recognize it and MTLº
appears on the display.
Ejecting a cassette tape
To stop or eject the cassette tape, push
the
button.
Playing a cassette tape
If a cassette is already in the slot, push
the TAPEº button.
Push the AUDIOº button to display
this screen.
Ð Cassette tape player
operation

AUDIO/VIDEO SYSTEM
208
Dolby Noise Reduction* feature: If you
are listening to a tape that was recorded
with Dolby B Noise Reduction, touch

º. The º touch-screen button will
be highlighted. Touch 
º again to turn
off Dolby B NR.
The Dolby NR mode reduces tape noise by
about 10 dB. For best sound reproduction,
play your tapes with these buttons on or off
according to the mode used for recording
the tape.
* Dolby noise reduction manufactured un-
der license from Dolby Laboratories Li-
censing Corporation. DOLBY and the
double-D symbol
are trademarks of
Dolby Laboratories Licensing Corpora-
tion.
Manual program selection
Reverse button: You can reverse the tape
by touching 
. The display will show
the opposite direction after reversing the
tape. Also if the tape reaches the end of
one side, it is automatically reversed to the
other side.
Fast forward and Rewind buttons: Yo u
can fast forward or fast rewind by touching
 or

.
To stop the tape while it is fast forwarding,
touch

, to stop the tape while it is re-
winding, touch  .
If a tape rewinds completely, the cassette
player will stop and then play the same
side. If a tape fast forwards completely, the
cassette player will play the other side of
the tape using the auto-reverse feature.
Auto-reverse feature: After the cassette
player reaches the end of a tape, it auto-
matically reverses and begins to play the
other side, regardless of whether the cas-
sette was playing or fast forwarding.

AUDIO/VIDEO SYSTEM
214
The numbers of the trays where the disc is
not set are dimmed.(b) Playing a disc
Push the DISC´AUXº button if the disc
are already loaded in the CD changer.
The CD CHANGERº screen will be dis-
played.
The discs set in the CD changer are played
continuously, starting with the last disc you
inserted. The disc number of the disc cur-
rently being played, the track or title and
chapter number and the time from the be-
ginning of the program are shown on the
display.
When play of one disc ends, the first track
of the following disc starts. When play of
the final disc ends, play of the first disc
starts again.
The changer will skip any empty disc trays.

AUDIO/VIDEO SYSTEM
215
(c) Selecting a desired disc
On the screen:
Touch the desired disc number.
The selected disc number is highlighted.
The changer will start playing the selected
disc from the first track.
On the audio panel:
Push the 
º or º button of CH/
DISCº.
When you release the button, the changer
will start playing the selected disc from the
first track.(d) Operating an audio CD
Playing an audio CD
Push the AUDIOº button to display
this screen.
CD text only Ð The disc title and track title
will appear on the screen when pushing
the DISC´AUXº button.
You can operate the touch-screen buttons
and choose the number of the disc you
want to play. The selected disc is automat-
ically played.

AUDIO/VIDEO SYSTEM
216 
Selecting a desired track
SEEK/TRACKº button: Use for a direct
access to a desired track.
Push the 
º or º button of SEEK/
TRACKº and repeat it until the desired
track number appears on the screen. As
you release the button, the changer will
start playing the selected track from the
beginning.
TRACK LISTº: The desired track can be
selected from a list. This function is avail-
able only when the vehicle is not moving.
Touch TRACK LISTº. The track list is
displayed.
Touch the desired track number. The
changer will start playing the selected
track from the beginning.
: By touching this button, the list moves
up by 6 track groups. If this button is
touched when the top page of the list is dis-
played, the last page is displayed.
: By touching this button, the list moves
down by 6 track groups. If this button is
touched when the last page of the list is
displayed, the top page is displayed.
Fast forward: Push the 
º button of
SEEK/TRACKº and hold it to fast for-
ward the disc. When you release the but-
ton, the changer will resume playing from
that position.
Reverse: Push the 
º button of SEEK/
TRACKº and hold it to reverse the disc.
When you release the button, the changer
will resume playing.

AUDIO/VIDEO SYSTEM
218
RANDº: Use it for automatic and random
selection.
Playing the tracks on one disc in ran-
dom order Ð
While the disc is playing, touch
RANDº briefly.
RANDº appears on the screen. The sys-
tem selects a track on the disc being lis-
tened to in random order. To cancel it,
touch RANDº once again.
Playing the tracks on all the audio discs
in random order Ð
While the disc is playing, touch
RANDº and hold it until the D´RANDº
appears on the screen.
The system selects a track on all the audio
discs in the changer in random order. To
cancel it, touch RANDº once again.
If a CD-TEXT disc is inserted, the title of
the disc and track will be displayed. Up to
29 letters can be displayed.(e) Operating a MP3/WMA disc
Playing a MP3/WMA disc
Push the AUDIOº button and touch a
MP3/WMA disc number to display this
screen.
You can operate the touch-screen buttons
and choose the number of the disc you
want to play. The selected disc is automat-
ically played.

AUDIO/VIDEO SYSTEM
219 
Selecting a desired folder
FOLDERº: Touch FOLDERº to go
to the next folder.
FOLDERº: Touch FOLDERº brief-
ly to go to the previous folder. To jump up
to the first folder, touch FOLDERº and
hold it until the beep sounds.
FOLDER LISTº: The desired folder can
be selected in a list. This function is avail-
able only when the vehicle is not moving.
Touch FOLDER LISTº. The folder list is
displayed.
Touch the desired folder number. The
changer will start playing the first file of the
selected folder.
: By touching this button, the list moves
up by 6 folder groups. If this button is
touched when the top page of the list is dis-
played, the last page is displayed.
: By touching this button, the list moves
down by 6 folder groups. If this button is
touched when the last page of the list is
displayed, the top page is displayed.
FILEº: The file list is displayed.
DETAILº: Details of the file currently
playing is displayed. This function is avail-
able only when the vehicle is not moving.