width Lexus GS250 2014 Owner's Manual
[x] Cancel search | Manufacturer: LEXUS, Model Year: 2014, Model line: GS250, Model: Lexus GS250 2014Pages: 688, PDF Size: 152.64 MB
Page 308 of 688
3084-5. Using the driving support systems
GS350_250_OM_OM30E16E_(EE)
■Lane departure warning function
●When the vehicle speed is approximately 48 km/h (30 mph) or
more
●When the lane width is more than approximately 3.0 m (9.8 ft.)
●When driving on a straight road or through a curve with a radius of
more than approximately 120 m (394 ft.)
■Lane keeping assist function
●When the vehicle speed is between approximately 72 and 180 km/h
(45 and 112 mph)
●When the vehicle-to-vehicle distance mode of the radar cruise con-
trol is on, and the set vehicle speed is approximately 72 km/h
(45 mph) or more (the function will not operate when the radar
cruise control is in set speed mode)
●When the lane width is between approximately 3.0 and 4.0 m
(9.8 and 13.1 ft.)
●When driving on a straight road or through a curve with a radius of
more than approximately 200 m (656 ft.)
Operating conditions for each function
GS350_250_OM_OM30E16E_(EE).book Page 308 Tuesday, July 8, 2014 7:11 PM
Page 485 of 688
485
6
6-3. Do-it-yourself maintenance
Maintenance and care
GS350_250_OM_OM30E16E_(EE)
Wheels
When replacing wheels, care should be taken to ensure that they are
equivalent to those removed in load capacity, diameter, rim width and
inset
*.
Replacement wheels are available at any authorized Lexus dealer or
repairer, or another duly qualified and equipped professional.
*: Conventionally referred to as “offset”.
Lexus does not recommend using the following:
●Wheels of different sizes or types
●Used wheels
●Bent wheels that have been straightened
●Use only Lexus wheel nuts and wrenches designed for use with your
aluminum wheels.
●When rotating, repairing or changing your tires, check that the wheel
nuts are still tight after driving 1600 km (1000 miles).
●Be careful not to damage the aluminum wheels when using tire chains.
●Use only Lexus genuine balance weights or equivalent and a plastic or
rubber hammer when balancing your wheels.
If a wheel is bent, cracked or heavily corroded, it should be replaced.
Otherwise, the tire may separate from the wheel or cause a loss of han-
dling control.
Wheel selection
Aluminum wheel precautions
GS350_250_OM_OM30E16E_(EE).book Page 485 Tuesday, July 8, 201 4 7:11 PM
Page 632 of 688
6328-1. Specifications
GS350_250_OM_OM30E16E_(EE)
Maintenance data (fuel, oil level, etc.)
*1: Unladen vehicle
*2:Vehicles with 265/35R19 tires
*3: Vehicles with towing package
*4:AWD models
Dimensions and weights
Overall length 4850mm (190.9 in.)
Overall width 1840 mm (72.4 in.)
Overall height*12WD 1455 mm (57.3 in.)
AWD 1470 mm (57.9 in.)
Wheelbase 2850 mm (112.2 in.)
Tr e a d*1
Front 1575 mm (62.0 in.)
Rear1590 mm (62.6 in.)
1560 mm (61.4 in.)*2
Gross vehicle
mass2WD 2170 kg (4784 lb.)
AWD 2250 kg (4960 lb.)
Maximum
permissible axle
capacityFront 1120 kg (2469 lb.)
Rear 1205 kg (2657 lb.)
Drawbar load*380 kg (176 lb.)
Towing capacity*3With brake1600 kg (3527 lb.)
1000 kg (2205 lb.)*4
Without brake 750 kg (1653 lb.)
GS350_250_OM_OM30E16E_(EE).book Page 632 Tuesday, July 8, 201
4 7:11 PM