set Lexus GS300 2001 Audio

AUDIO
165 (e) Selecting a desired track
21G023a
ºTRACKº button: Use for direct access to a desired track.
Push either side of the ºTRACKº button several times until the
desired track number appears on the display. As you release
the button, the player will start playing the selected track from
the beginning.
ºFast forwardº button.
Push the º

º button and hold it to fast forward the disc.
When you release the button, the compact disc player will
resume playing from that position.
ºReverseº button.
Push the ºº button and hold it to reverse the disc. When
you release the button, the compact disc player will resume
playing.(f) Other compact disc player functions
21G024b
ºRPTº button: Use it for automatic repeat of the track or disc
you are currently listening to.
Push the button briefly while the track is playing. ªRPTº
appears on the display. When the track is finished, the player
will automatically go back to the beginning of the track and play
the track again. To cancel it, push the button once again.
Push the button until you hear a beep. ªD.RPTº appears on the
display. When the disc is finished, the player will automatically
go back to the first track of the disc and play again.
To cancel it, push the button once again.
ºRANDº button: Use it for automatic track or disc selection
and play by the system.
When the button is pushed briefly, ªRANDº appears on the
display. The system selects a track in the discs which are set
and plays it. To cancel it, push the button once again.

AUDIO
166When the button is pushed until you hear a beep, ªD.RANDº
appears on the display. The system selects a track and discs
in the magazine which are set and plays it. To cancel it, push
the button once again.
When a track is skipped or the system is inoperative, push the
button to reset.
(g) If the player malfunctions
If ºWAITº appears on the display, audio signals of the disc
cannot be read or the system has trouble. Push the ºDISCº
button once again.
If the player does not operate, check that the disc surface is not
soiled or damaged. If the disc is O.K., the following two causes
are possible.
Condensation may have occurred on the internal
mechanism of the automatic changer. Open the cover to let
the air circulate.
The temperature of the player's internal mechanism is
raised because of high external temperature. Remove the
magazine from the player to cool it.
If the player still does not operate, take it to your Lexus dealer.
Steering pad switches (GS430 only)
21g137a
The steering pad switches are installed on the left side of the
steering wheel.
ªMODEº switch: Push the ªMODEº switch to select an audio
mode. Each push changes the mode sequentially if the
desired mode is ready to use. When you push the switch with
the audio system turned off, the audio system turns on.
ªVOLº switches: Push ª
º to increase the volume and ª º
to decrease the volume. The volume continues to increase or
decrease while the switch is being pressed.
ªSETº switch: Push the ªSETº switch to change to the preset
volume. To preset the volume, adjust the volume and push the
switch until you hear a beep.

AUDIO
167 ªº or ªº switch: The function in each mode is shown
below.
(a) When the radio mode is selected
Push this switch briefly to select a station that you preset on
the switch of the audio system.
Push this switch and hold it until you hear a beep. The radio
will begin seeking up or down for a station and stop on
reception.
(b) When the ªTAPEº mode is selected
Push this switch briefly for automatic program selection. In
automatic program selection, you can skip up to 9 programs
at a time. For details, see page 160 for details.
Push this switch until you hear a beep to fast forward or
rewind the tape. To stop fast forwarding or rewinding, push
the same side on the switch.
(c) When the ªCDº mode is selected
Push this switch briefly to select a desired track.
To select a desired disc, push and hold this switch until you
hear a beep.
CAUTION
Operate the steering pad switches with due care while
you are driving. Otherwise an accident may occur.

AUDIO
168
Car audio system operating hints
NOTICE
To ensure the correct audio system operation:
Be careful not to spill beverages over the audio
system.
Do not put anything other than a cassette tape or CD
magazine into the cassette tape slot or CD changer.
The use of cellular phone inside or near the vehicle
may cause a noise from the speakers of the audio
system which you are listening to. However, this
does not indicate a malfunction.
Radio reception
Usually, the problem with radio reception does not mean there
is a problem with your radio ± it is just the normal result of
conditions outside the vehicle.
For example, nearby buildings and terrain can interfere with
FM reception. Power lines or telephone wires can interfere
with AM signals. And of course, radio signals have a limited
range. The farther you are from a station, the weaker its signal
will be. In addition, reception conditions change constantly as
your vehicle moves.
Here are some common reception problems that probably do
not indicate a problem with your radio:FM
Fading and drifting stations ± Generally, the effective range
of FM is about 40 km (25 miles). Once outside this range, you
may notice fading and drifting, which increase with the
distance from the radio transmitter. They are often
accompanied by distortion.
Multi±path ± FM signals are reflective, making it possible for
two signals to reach your antenna at the same time. If this
happens, the signals will cancel each other out, causing a
momentary flutter or loss of reception.
Static and fluttering ± These occur when signals are blocked
by buildings, trees, or other large objects. Increasing the bass
level may reduce static and fluttering.
Station swapping ± If the FM signal you are listening to is
interrupted or weakened, and there is another strong station
nearby on the FM band, your radio may tune in the second
station until the original signal can be picked up again.

AUDIO
169 AM
Fading ± AM broadcasts are reflected by the upper
atmosphere ± especially at night. These reflected signals can
interfere with those received directly from the radio station,
causing the radio station to sound alternately strong and weak.
Station interference ± When a reflected signal and a signal
received directly from a radio station are very nearly the same
frequency, they can interfere with each other, making it difficult
to hear the broadcast.
Static ± AM is easily affected by external sources of electrical
noise, such as high tension power lines, lightening, or electrical
motors. This results in static.
Caring for your cassette player and tapes
For the best performance for your cassette player and tapes:
Clean the tape head and other parts regularly.
A dirty tape head or tape path can decrease sound quality
and tangle your cassette tapes. The easiest way to clean
them is by using a cleaning tape. (A wet type is
recommended.)Use high±quality cassettes:
Low±quality cassette tapes can cause many problems,
including poor sound, inconsistent playing speed, and
constant auto±reversing. They can also get stuck or
tangled in the cassette player.
Do not use a cassette if it has been damaged or tangled or
if its label is peeling off.
Do not leave a cassette in the player if you are not listening
to it, especially if it is hot outside.
Store cassettes in their cases and out of direct sunlight.
Avoid using cassettes with a total playing time longer than
100 minutes (50 minutes per side). The tape used in these
cassette is thin and could get stuck or tangled in the
cassette player.

AUDIO
171 Your automatic changer cannot play special shaped or
low±quality compact discs such as those shown here. Do not
use them as the changer could be damaged.
20L038

Correct
Wrong
Handle compact discs carefully, especially when you set
them into the magazine. Hold them on the edge and do not
bend them. Avoid getting fingerprints on them, particularly
on the shiny side.
Dirt, scrapes, warping, pin holes, or other disc damage
could cause the player to skip or to repeat a section of a
track. (To see a pin hole, hold the disc up to the light.)
20L039
To clean a compact disc: Wipe it with a soft, lint±free cloth
that has been dampened with water. Wipe in a straight line
from the center to the edge of the disc (not in a circle). Do not
use a conventional record cleaner or anti±static device.
CAUTION
Compact disc players use an invisible laser beam which
could cause hazardous radiation exposure if directed
outside the unit. Be sure to operate the player correctly.