set Lexus GS300 2001 Audio

AUDIO
149
1
Turning the system on and adjusting volume
(See page 150 for details.)
2
Stopping and ejecting a cassette tape
(See page 158 for details.)
3
Function buttons
1 ± 6:Station selector buttons
(See page 154 for details.)
SCAN:Scan tuning
(See page 155 for details.)
MSG: Message button
(See page 157 for details.)
4
Display of functions in TAPE mode

:
Side change
(See page 159 for details.)
:DOLBY NR
(See page 159 for details.)
:Rewinding
(See page 159 for details.)


:Fast forwarding
(See page 159 for details.)
RPT:Automatic repeat
(See page 160 for details.)
SKIP:Automatic skip of blank portions of tape
(See page 160 for details.)
4
Display of functions in CD mode
:Disc selection
(See page 164 for details.)
:Reversing
(See page 165 for details.)


:Fast forwarding
(See page 165 for details.)
RPT:Automatic repeat
(See page 165 for details.)
RAND:Random access
(See page 165 for details.)
SCAN:Track and disc scan selection
(See page 164 for details.)
5
AUDIO±TUNE knob
(See page 151 for details.)
6
Radio data system/Traffic announcement/
Program type
(See page 155, 156 and 157 for details.)
7
Cassette tape slot
(See page 158 for details.)
8
Mode selectors
(See page 150 for details.)
9
Radio mode:Seek tuning
(See page 154 for details.)
TAPE mode:Direct access to a desired program
(See page 160 for details.)
CD mode:Direct access to a desired program
(See page 165 for details.)

AUDIO
150
Using your audio system: some basics
This section describes some of the basic features of the Lexus
audio system. Some information may not pertain to your
system.
Your audio system works when the ignition key is in the ºACCº
or ºONº position.
NOTICE
To prevent the battery from being discharged, do not
leave the car audio on longer than necessary when the
engine is not running.
(a) Turning the system on and off
21G005a
Push this knob to turn the audio system on and off. Turn
this knob to adjust the volume.
The system turns on in the last mode used.
21G081b
Push ºAMº, ºFMº, ºTAPEº or ºDISCº to turn on that mode.
The selected mode turns on directly.
Push these buttons if you want to switch from one mode to
another.
If the tape or disc is not set, the cassette player or compact disc
player does not turn on.
You can turn off the cassette player by ejecting the cassette
tape. If the audio system was previously off, then the entire
audio system will be turned off when you eject the cassette
tape. If another function was previously playing, it will come on
again.

AUDIO
152(c) Your radio antenna
The wire antenna is mounted inside the rear window.
NOTICE
When cleaning the inside of the rear window, be
careful not to scratch or damage the wire antenna.
Putting a window tint (especially, conductive or
metallic type) on the rear window may affect the
reception of radio or mobile telephone. For the
installation of the window tint, consult with your
Lexus dealer.
(d) Your cassette player
When you insert a cassette, the exposed tape should be to the
right.
NOTICE
Do not oil any part of the cassette player, and do not
insert anything except a cassette tape into the slot.
(e) Your automatic changer
21G001±1
If your Lexus is equipped with an automatic changer, it can play
selected discs or continuously play all the discs set in the
magazine.
When you set discs into the magazine, make sure they face the
correct way. If not, the player will display ºERRORº and the
disc number.
NOTICE
Never try to disassemble or oil any part of the compact
disc player. Do not insert anything except a compact
disc into the magazine.
The player is intended for use with 12 cm (4.7 in.) discs only.

AUDIO
154(b) Presetting a station
21G113a
1. Tune in the desired station.
2. Push one of the station selector buttons ( 1±6 ) and hold
it until a beep is heard. This sets the station to the button
and the button number ( 1±6 ) appears on the display.
Each button can store one AM station and two FM stations. To
change the preset station to a different one, follow the same
procedure.
The preset station memory is cancelled when the power
source is interrupted by battery disconnection or a blown fuse.(c) Selecting a station
Your Lexus has an electronic tuning radio (ETR). Tune in the
desired station using one of the following methods.
21G115a
Preset tuning: Push the button ( 1±6 ) for the station you want.
The button number ( 1±6 ) and station frequency appear on the
display.
Manual tuning: Turn the ªAUDIO±TUNEº knob. The radio will
step up or down to another frequency.
Seek tuning: Push the ºSEEKº button. The radio will begin
seeking up or down for a station of the nearest frequency and
will stop on reception. Each time you push the button, the
stations will be searched out one after another.

AUDIO
155
21G012b
To scan all the frequencies: Push the ºSCANº button.
ºSCANº appears on the display. The radio will find the next
station up the band, stay there for a few seconds, and then
scan again. To select a station, push the ºSCANº button a
second time.
To scan the preset stations: Push the ºSCANº button until
you hear a beep. ºP.SCANº appears on the display. The radio
will tune in the next preset station up the band, stay there for
a few seconds, and then move to the next preset station. To
select a station, push the ºSCANº button a second time.(d) RDS (Radio Data System)
AF (Alternative Frequency) function: When the RDS is
turned on, a station providing good reception is
automatically selected if current reception worsens.
21g127
When you push the ªRDSº button briefly during FM reception,
the RDS turns on. ªRDSº and ªRDS SEARCHº appear on the
display and the radio starts to search RDS stations.
If any RDS stations cannot be found, ªNOTHINGº appears and
the previous mode returns.
If RDS stations are found, ªFOUND **STº appears on the
display (** indicating the number of stations which are found)
in the FM TYPE mode and the RDS stations are preset by
program type.
To turn off the RDS, push the ªRDSº button until you hear a
beep.

AUDIO
158To recall a radio text message, push the ªMSGº button. Each
time you push the button, the message will be displayed from
the new one.
If there is no radio text message in memory and when no
message is received, ªNO MSG STOREDº appears on the
display. Then the previous mode returns.
Cassette tape player operation
(a) Playing a cassette tape
21G117
When you insert a cassette tape, the exposed tape should
be to the right.
The player will automatically start when you insert a cassette
tape. At this time, ºTAPEº appears on the display.
If a metal or chrome equivalent cassette tape is put in the
cassette player, the player will automatically adapt to it and
ºMETALº appears on the display.
To stop or eject the cassette tape, push the ºEJECTº button.
Auto±reverse feature: After the cassette player reaches the
end of a tape, it automatically reverses and begins to play the
other side, regardless of whether the cassette was playing or
fast forwarding.

AUDIO
159
21G083b
If a cassette is already in the slot, push the ºTAPEº button.
Dolby Noise Reduction* feature: If you are listening to a
tape that was recorded with Dolby* Noise Reduction, push the
button by the double±D symbol. The display will indicate that
the Dolby noise reduction system is on.
The Dolby NR mode reduces tape noise by about 10 dB. For
best sound reproduction, play your tapes with the Dolby NR on
or off according to the mode used for recording the tape.
To play a tape recorded without Dolby NR, push the button
again to turn off the Dolby NR.
* Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation. ºDOLBYº and the double±D
symbol
are trademarks of Dolby Laboratories Licensing
Corporation.
(b) Manual program selection
21G119
ºProgramº button: Push the º
º button to select the
other side of a cassette tape. The display indicates which side
is currently selected ( indicates top side,  indicates bottom
side).
ºRewindº button: Push the ºº button to rewind a tape.
ºREWº appears on the display.
To stop rewinding, push the same button or ºTAPEº button.
ºFast forwardº button: Push the º

º button to fast forward
a cassette tape. ºFFº appears on the display.
To stop fast forwarding, push the same button or ºTAPEº
button.

AUDIO
160(c) Automatic program selection
20G121a
ºRPTº button: The repeat feature automatically replays the
current program.
Push the ºRPTº button while the program is playing. When the
program ends, it will automatically be rewound and replayed.
Push the button again to turn off the repeat feature.
There must be at least 4 seconds of blank space between
programs for the repeat feature to work correctly.
ºSKIPº button: The skip feature allows you to fast forward
past long stretches of blank tape. This is especially useful at
the end of cassettes.
Push the ºSKIPº button. The player will automatically skip any
blank portions of 15 seconds or more and play the next
program. To cancel it, push the button once again.
21G123
ºAutomatic program selectionº button: The automatic
program selection feature allows you to program your cassette
player to skip forward or backward to locate the song you want
to hear. You can skip up to 9 programs at a time.
Push this button on the upper side to skip forward. ºFFº and
the number will appear on the display. Push the button until the
number you want to skip appears on the display. After that, the
player will automatically skip forward.
When the end of the tape is reached, the player automatically
reverses sides and resumes normal play.

AUDIO
161 Push this button on the lower side to skip backward. Push the
button until ºREWº and the number you want to skip appear on
the display.
If you set ºREW 1º, the player will rewind to the beginning
of the current program.
When counting the number of programs you want to rewind,
remember to count the current program as well. For
example, if you want to rewind to a song that is two before
the song you are listening to, push this button until ºREW
3º appears on the display.
When the beginning of the tape is reached, the player
automatically resumes normal play.
There must be at least 3 seconds of blank space between
programs for this feature to work correctly.
ºRPTº, ºSKIPº or ºAutomatic program selectionº
features: These features may not work well with some spoken
word, live or classical recordings.
Compact disc player operation
The compact disc player is an optional accessory that your
vehicle is pre±wired to accept. Although your audio system
has a CD button, your vehicle may or may not be equipped with
a CD player. Please contact your dealer for additional details
if you would like to have the optional CD player installed.
(a) Inserting compact discs
21G002
1. Pull the lever and open the glove box door.

AUDIO
163 When the magazine is set completely, the system will be in a
ºLoadº cycle for approximately 10 seconds while the system
searches for discs in the magazine. Upon completion of this
cycle, the CD unit will be ready to play. If the ºDISCº button is
pushed during the ºLoadº cycle, ºLOADº appears on the
display until the system has completed the load cycle, after
which the system will begin normal play.
CAUTION
To reduce the chance of injury in case of an accident or
a sudden stop, always keep the glove box door closed
while driving.
(b) Playing a compact disc
21G084b
Push the ºDISCº button if the magazine is already loaded
in the player.
ºCDº appears on the display.
The discs set in the magazine are played continuously, starting
with disc number 1. The disc number of the disc currently
being played, the track number and the time from the
beginning of the program appear on the display.
When play of one disc ends, the first track of the following disc
starts. When play of the final disc ends, play of the first disc
starts again.
The player will skip any empty disc trays.