washer fluid Lexus GS300 2006 Electrical Components

SECTION 6 – 4
563
SERVICE PROCEDURES AND
SPECIFICATIONS
Electrical components
Specifications564 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking battery condition571 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Battery recharging precautions574 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking and replacing the blade type fuses574 . . . . . . . . . . . . . . . .
Checking the cartridge type fuses577 . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding washer fluid579 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking the headlight aim579 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacing light bulbs584 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ELECTRICAL COMPONENTS
579
ADDING WASHER FLUID
If the washer tank becomes nearly empty, add washer
fluid.
You may use plain water as washer fluid. However, in cold
areas where temperatures range below the freezing point, use
washer fluid containing antifreeze. This product is available at
your Lexus dealer and most auto parts stores. Follow the
manufacturer’s directions for how much to mix with water.
NOTICE
Do not use engine antifreeze or any other substitute
because it may damage your vehicle’s paint.
CHECKING THE HEADLIGHT AIM
G64020

1
Beam angle gauge
(horizontal movement for high beam)
2
Beam angle gauge
(vertical movement for high beam)
3
Beam angle gauge
(vertical movement for low beam)
4
Beam angle gauge
(horizontal movement for low beam)
Before checking the headlight aim:
1. Be sure that the body around the headlight is not deformed.
2. Park the vehicle on a level spot.
3. The driver gets into the driver’s seat and puts the vehicle in
a state readying for a driving (with a full tank).
4. Bounce the vehicle several times.