mirror Lexus GS300h 2013 User Guide

1052. Instrument cluster
2
Instrument cluster
GS450h_300h_OM_OM30D53E_(EE)
Outside rear view mirrors (vehicles with BSM)
Warning lights inform the driver of malfunctions in the indicated
vehicle’s systems.
Warning lights
*1Brake system warning
light
(P. 830)*1, 2
(if
equipped)
“PCS” warning light
(P. 832)
*1Charging system warn-
ing
light (P. 8 3 1 )*1Slip indicator
(P. 832)
*1
Malfunction indicator
lamp (P. 831)
*1, 2
(if
equipped)
“AFS OFF” indicator
(P. 832)
*1
SRS warning light
(P. 831)
*1, 2
(if
equipped)
Brake hold operated
indicator (P. 832)
*1ABS warning light
(P. 831)*2Parking brake indicator
(P. 832)
*1Electric power steering
system warning light
(P. 832)*1Brake system warning
light (P. 8 3 2 )

1072. Instrument cluster
2
Instrument cluster
GS450h_300h_OM_OM30D53E_(EE)“READY” indicator
(P. 246)EV indicator (P. 8 2 )
Cruise control “SET”
indicator (P. 298)Cruise control indicator
(P. 298)
(if
equipped)
LKA (Lane-Keeping
Assist) indicator
(P. 337)
(if
equipped)
Radar cruise control
indicator (P. 302)
(if
equipped)
Lexus parking assist-
sensor indicator (P.
346)Parking brake indicator
(P. 266)
*1
(if
equipped)
“AFS OFF” indicator
(P. 274)
*1
Brake hold standby indi-
cator (P. 269)
*1, 2Slip indicator
(P. 396)*1Brake hold operated
indicator (P. 269)
*1
VSC OFF indicator
(P. 397)
*4
(if
equipped)
BSM (Blind Spot Moni-
tor) outside rear view
mirror indicators (P.
414)
*1, 3
(if
equipped)
“PCS” warning light
(P. 404)
*1
“PASSENGER AIR BAG” indica-
tor (P. 5 6 )

1082. Instrument cluster
GS450h_300h_OM_OM30D53E_(EE)
*1: These lights turn on when the power switch is turned to ON mode to indi-
cate that a system check is being performed. They will turn off after the
hybrid system is on, or after a few seconds. There may be a malfunction in
a system if the lights do not come on, or turn off. Have the vehicle
inspected by any authorized Lexus dealer or repairer, or another duly qual-
ified and equipped professional.
*2: The light flashes to indicate that the system is operating.
*3: The light comes on when the system is turned off. The light flashes faster
than usual to indicate that the system is operating.
*4: In order to confirm operation, the BSM outside rear view mirror indicators
illuminate in the following situations:
• When the power switch is turned to ON mode while the BSM main
switch is set to ON.
• When the BSM main switch is set to ON while the power switch is in
ON mode.
If the system is functioning correctly, the BSM outside rear view mirror
indicators will turn off after a few seconds.
If the BSM outside rear view mirror indicators do not illuminate or do not
turn off, there may be a malfunction with the system.
If this occurs, have the vehicle inspected by any authorized Lexus dealer
or repairer, or another duly qualified and equipped professional.
CAUTION
If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning light not
come on when you start the hybrid system, this could mean that these sys-
tems are not available to help protect you in an accident, which could result
in death or serious injury. Have the vehicle inspected by any authorized
Lexus dealer or repairer, or another duly qualified and equipped profes-
sional immediately if this occurs.

137
3
Operation of
each component
GS450h_300h_OM_OM30D53E_(EE)3-1. Key information
Keys .................................. 138
3-2. Opening, closing and locking
the doors and trunk
Smart entry & start system 143
Wireless remote control .... 168
Doors ................................ 183
Trunk................................. 187
3-3. Adjusting the seats
Front seats ......................... 194
Driving position memory.. 198
Head restraints .................. 204
3-4. Adjusting the steering wheel
and mirrors
Steering wheel .................. 207
Inside rear view mirror ..... 208
Outside rear view mirrors ..211
3-5. Opening, closing the windows
and moon roof
Power windows................. 215
Moon roof ......................... 218

1993-3. Adjusting the seats
3
Operation of each component
GS450h_300h_OM_OM30D53E_(EE)
Driving position memory
The seat and steering wheel are automatically adjusted to allow the
driver or front passenger to enter and exit the vehicle easily.
Driver’s seat
When all of the following
have been performed, the
driver’s seat and steering
wheel are automatically
adjusted to a position that
allows driver to enter and exit
the vehicle easily.
• The shift lever has been
shifted to P.
• The power switch has been
turned off.
• The driver’s seat belt has
been unfastened.
When any of the following has been performed, the driver’s seat
and steering wheel automatically return to their original posi-
tions.
• The power switch has been turned to ACCESSORY mode or
ON mode.
• The driver’s seat belt has been fastened.
Front passenger’s seat (if equipped)
This feature automatically adjusts the front seats, steering wheel
and outside rear view mirrors to make entering and exiting the
vehicle easier or to suit your preferences.
Power easy access system

2003-3. Adjusting the seats
GS450h_300h_OM_OM30D53E_(EE)
If the front passenger’s door is opened while the vehicle is
stopped, the adjusted lumbar support, ottoman (if equipped), etc.
will return to its original position.
Operation of the power easy access system
When exiting the vehicle, the power easy access system may not operate if
the seat is already close to the rearmost position, etc.
Customization
The seat movement amount settings of the power easy access system can be
customized. (Customizable features: P. 942)
Your preferred driving position (the position of the driver’s seat,
steering wheel and outside rear view mirrors) can be recorded and
recalled by pressing a button.
Three different driving positions can be recorded into memory.
Recording procedure
Check that the shift lever is in P.
Turn the power switch to ON mode.
Adjust the driver’s seat, steering wheel, and outside rear view
mirrors to the desired positions.
While pressing the “SET”
button, or within 3 seconds
after the “SET” button is
pressed, press button “1”,
“2” or “3” until the buzzer
sounds.
If the selected button has
already been preset, the previ-
ously recorded position will be
overwritten.
Driving position memory
1
2
3
4

2043-3. Adjusting the seats
GS450h_300h_OM_OM30D53E_(EE)
While pressing the recalled
button, press and hold the
door lock switch (either
lock or unlock) until the
buzzer sounds.
If the button could not be regis-
tered, the buzzer sounds contin-
uously for approximately 3
seconds.
Recall procedure
Carry the electronic key that has been registered to the driving
position, and then unlock and open the driver’s door using the
smart entry & start system or wireless remote control.
The driving position will move to the recorded position (not including
the steering wheel). However, the seat will move to a position slightly
behind the recorded position in order to make entering the vehicle eas-
ier.
If the driving position is in a position that has already been recorded,
the seat and outside rear view mirrors will not move.
Turn the power switch to ACCESSORY mode or ON mode, or
fasten a seat belt.
The seat and steering wheel will move to the recorded position.
4
1
2

207
3 3-4. Adjusting the steering wheel and mirrors
Operation of each component
GS450h_300h_OM_OM30D53E_(EE)
Steering wheel
Operating the switch moves the steering wheel in the following
directions:
Up
Down
Toward the driver
Away from the driver
The steering wheel can be adjusted when
The power switch is in ACCESSORY or ON mode
*.
*: If the driver’s seat belt is fastened, the steering wheel can be adjusted
regardless of power switch mode.
Automatic adjustment of the steering position
A desired steering position can be entered to memory and recalled automati-
cally by the driving position memory system. (P. 199)
Power easy access system
The steering wheel and driver’s seat move in accordance with power switch
mode and the driver’s seat belt condition. (P. 199)
Adjustment procedure
1
2
3
4
CAUTION
Do not adjust the steering wheel while driving.
Doing so may cause the driver to mishandle the vehicle and cause an acci-
dent, resulting in death or serious injury.

2083-4. Adjusting the steering wheel and mirrors
GS450h_300h_OM_OM30D53E_(EE)
Inside rear view mirror
The height of the rear view mirror can be adjusted to suit your driv-
ing posture.
Adjust the height of the rear
view mirror by moving it up and
down.
Manual anti-glare inside rear view mirror
Reflected light from the headlights of vehicles behind can be
reduced by operating the lever.
Normal position
Anti-glare position
The rear view mirror’s position can be adjusted to enable sufficient
confirmation of the rear view.
Adjusting the height of rear view mirror
Anti-glare function
1
2

2093-4. Adjusting the steering wheel and mirrors
3
Operation of each component
GS450h_300h_OM_OM30D53E_(EE)
Auto anti-glare inside rear view mirror
Responding to the level of brightness of the headlights of vehicles
behind, the reflected light is automatically reduced.
Changing automatic anti-glare
function mode
ON/OFF
When the automatic anti-glare
function is in ON mode, the indi-
cator illuminates.
The function will set to ON mode
each time the power switch is
turned to ON mode.
Pressing the button turns the func-
tion to OFF mode. (The indicator
also turns off.)
To prevent sensor error (vehicles with auto anti-glare inside rear view mirror)
Indicator
To ensure that the sensors operate prop-
erly, do not touch or cover them.