engine LEXUS GS400 2000 Service Manual PDF

± BODY ELECTRICALTROUBLESHOOTING
BE±5
2306 Author: Date:
2000 LEXUS GS300/GS400 (RM718U) ºHI±Beamº does not light (All).
1. Headlight Dimmer Switch
2. Daytime Running Light Main Relay
3. Wire HarnessBE±37
BE±37
±
ºHI±Beamº does not light (One side).
1. Bulb
2. H±LP L±UPR Fuse
3. H±LP R±UPR Fuse
4. Daytime Running Light No.3 Relay
5. Wire Harness±
BE±21
BE±21
BE±37
±
ºFlashº does not light.
1. Headlight Dimmer Switch
2. Daytime Running Light Main Relay
3. Wire HarnessBE±37
BE±37
±
Headlight does not come on.
1. Headlight Control Relay
2. Daytime Running Light Main Relay
3. Daytime Running Light No.2, 3, 4 Relay
4. Headlight Dimmer Switch
5. Light Control Switch
6. Wire Harness
7. *Light Control ECU
8. BulbBE±37
BE±37
BE±37
BE±37
BE±37
±
±
±
Headlight does not come on with light control switch in HEAD.
1. Light Control Switch
2. *Light Control ECU
3. Wire HarnessBE±37
±
±
Headlight does not go out with light control switch in OFF.
1. Headlight Control Relay
2. *Light Control ECU
3. Wire HarnessBE±37
±
±
Headlight flickers.
1. Bulb
2. *Light Control ECU
3. Wire Harness±
BE±37
±
Headlight is dark.
1. Bulb
2. *Light control ECU
3. Wire Harness±
±
±
Taillight does not come on with light control switch in TAIL.
1. Taillight Control Relay (Instrument Panel J/B)
2. Light Control Switch
3. Wire HarnessBE±37
±
±
Taillight does not go out with light control switch in OFF.
1. Taillight Control Relay
2. Light Control Switch
3. Wire HarnessBE±37
BE±37
±
Headlight does not come on with engine running and light control
switch in OFF.
1. ECU±B Fuse
2. GAUGE Fuse
3. Daytime Running Light Main Relay
4. Daytime Running Light No.2, 3, 4 Relay
5. Generator L Terminal
6. Parking Brake Switch
7. Wire HarnessBE±21
BE±21
BE±37
BE±37
DI±853
BE±92
±
*: HID Type

± BODY ELECTRICALTROUBLESHOOTING
BE±11
2312 Author: Date:
2000 LEXUS GS300/GS400 (RM718U) The Key related power window operations does not operate with
driver side door key cylinder.
(Master switch operation is normal.)
TROUBLESHOOTING NO.3BE±111
Power window does not operate with multi±function transmitter.
(Windows operate normally with master switch.)TROUBLESHOOTING NO.4BE±111
Window moves down without being ordered during the up opara-
tion.TROUBLESHOOTING NO.5BE±111
POWER DOOR LOCK CONTROL SYSTEM
This system uses the multiplex communication system, so check diagnosis system of the multiplex commu-
nication system before you proceed with troubleshooting.
SymptomSuspect AreaSee page
All the doors cannot be locked or unlocked.
(Power Window Control System is normal.)1. Door Lock Control Switch
2. Wire Harness
3. Body No.1 ECUBE±131
±
DI±776
Only one side door lock control does not operate.
1. Door Lock Motor
2. Wire Harness
3. Each Door ECUBE±131
±
±
Door key related function does not operate.
1. Door Key Lock and Unlock Switch
2. Wire Harness
3. Each Door ECU
4. Body No.1 ECUBE±131
±
±
DI±776
Key confinement prevention function does not operate.
1. Key Unlock Warning Switch
2. Door Courtesy Switch
3. Wire Harness
4. Each Door ECUBE±31
BE±60
±
±
Luggage compartment door opener function does not operate.
1. Luggage Compartment Door Opener Switch
2. Luggage Compartment Door Opener Motor
3. Wire Harness
4. Body No.1 ECUBE±131
BE±131
±
DI±776
THEFT DETERRENT SYSTEM
This system uses the multiplex communication system, so check diagnosis system of the multiplex commu-
nication system before you proceed with troubleshooting.
SymptomSuspect AreaSee page
The system cannot be set.
1. Indicator Light
2. Key Unlock Warning Switch
3. Door Unlock Detection Switch
4. Engine Hood Courtesy Switch
5. Luggage Compartment Door Courtesy Switch
6. Wire Harness
7. Each Door ECU
8. Body No.1 ECUBE±150
BE±31
BE±131
BE±150
BE±60
±
±
DI±776
The system cannot be canceled when the ignition switch is turned
to ON with key.
1. Key Unlock Warning Switch
2. Ignition Switch
3. RAD NO.2 Fuse
4. Wire Harness
5. Body No.1 ECUBE±31
BE±31
BE±21
±
DI±776
The system cannot be canceled when the luggage compartment
door is unlocked with key.1. Luggage Compartment Door Courtesy Switch
2. Wire Harness
3. Body No.1 ECUBE±60
±
DI±776
The system does not operate when the engine hood is opened.
1. Engine Hood Courtesy Switch
2. Wire Harness
3. Body No.1 ECUBE±150
±
DI±776

± BODY ELECTRICALTROUBLESHOOTING
BE±15
2316 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
GARAGE DOOR OPENER SYSTEM
SymptomSuspect AreaSee page
The equipment of which code has been registered does not oper-
ate.1. Garage Door Opener Switch
2. Wire Harness
3. *BE±235
±
±
LED does not light up. (Even though either switch is pressed.)1. Garage Door Opener Switch
2. Wire HarnessBE±235
±
LED does not light up. (Only one switch is pressed.)Garage Door Opener SwitchBE±235
* As the GARAGE DOOR OPENER on the vehicle side seems to be normal, check the OPENER on the
equipment side, of which code has been registered.
ENGINE IMMOBILIZER SYSTEM
SymptomSuspect AreaSee page
Engine immobilizer system does not operate.See DIAGNOSIS SYSTEMDI±726
HORN SYSTEM
SymptomSuspect AreaSee page
Horn system does not operate.
1. HORN Fuse
2. Horn Relay
3. Horn Switch
4. Horn
5. Wire HarnessBE±21
BE±250
BE±250
BE±250
±
Horns blow all the time.
1. Horn Relay
2. Horn Switch
3. Wire HarnessBE±250
BE±250
±
One horn operates but the other horn does not operate.1. Horn
2. Wire HarnessBE±250
±
Horns operate abnormally.
1. Horn Relay
2. Horn
3. Wire HarnessBE±250
BE±250
±

BE0H8±04
I10257
Driver Side Junction Block

GAUGE Fuse

TAIL Fuse

Taillight Control Relay

Body ECU No.2
Combination Switch

Light Control Switch

Headlight Dimmer SwitchIgnition Switch
Daytime Running
Light Main Relay
(w/ D.R.L. System) HeadlightsEngine Room No.1 Junction Block

H±LP L LWR Fuse

H±LP R LWR Fuse

H±LP L UPR Fuse (w/o D.R.L System)

H±LP R UPR Fuse (w/o D.R.L System)

Headight Control Relay D.R.L.: Daytime Running Light
Automatic Light Control Sensor
Headlights
Taillights
Engine Room No.2 Junction Block

Headight Dimmer (D.R.L. No.2) Relay

H±LP R UPR Fuse (w/ D.R.L System)

H±LP L UPR Fuse (w/ D.R.L System)
Light Control ECU Light Control ECU
Daytime Running Light No.3 and No.4 Relay
(w/ D.R.L. System)
Daytime Running Light Resister
± BODY ELECTRICALHEADLIGHT AND TAILLIGHT SYSTEM
BE±33
2334 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
HEADLIGHT AND TAILLIGHT SYSTEM
LOCATION
The vehicle shown in this illustration is ºGS400º.
All components of ºGS300º other than the ones used for engine are same as ºGS400º.

I04038
I04039
BE±42
± BODY ELECTRICALHEADLIGHT AND TAILLIGHT SYSTEM
2343 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)8 ± Ground
Headlight dimmer switch HIGH beam or FLASHContinuity
1 ± GroundIgnition switch LOCK or ACCNo voltage
1 ± GroundIgnition switch ON or STARTBattery positive voltage
5 ± GroundEngine StopNo voltage
5 ± GroundEngine RunningBattery positive voltage
7 ± GroundConstantBattery positive voltage
9 ± GroundConstantBattery positive voltage
If circuit is specified, try replacing the relay with a new one.
If circuit is not as specified, inspect the circuits connected to oth-
er parts.
16. INSPECT AUTOMATIC LIGHT CONTROL
AUTO ON:
(a) Turn the ignition switch ON.
(b) Turn the light control switch to AUTO.
(c) Gradually cover the top of the sensor.
(d) Check the accessory lights and the headlights should turn
ON.
17. INSPECT AUTOMATIC LIGHT CONTROL
AUTO OFF:
(a) Gradually expose the sensor.
(b) Check the headlights and the accessory lights should turn
OFF.
18. INSPECT LIGHT±OFF CONDITION
(a) Turn the ignition switch ON.
(b) Gradually cover the top of the sensor.
Lights auto ON:
(c) Check that the lights go off under the following conditions.
(1) Light control switch is OFF.
(2) The area surrounding the sensor gets bright.
(3) The driver's door is opened with the ignition switch
OFF.

I07728
20.9 mm (0.823 in.)
0.4°
3 m (9.84 ft)
W
V Center
Line
V LH Line V RH Line
H
HRH Line3 cm
(0.57°)LH
Line
W
I04297
Beam Angle Gauge
(Vertical Alignment)
Acceptable
Range
Bubble
± BODY ELECTRICALHEADLIGHT AND TAILLIGHT SYSTEM
BE±47
2348 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
(c) Check the headlight aimming.
(1) Prepare the thick white colored paper.
(2) Stand the paper perpendicularly and ensure the
distance from it to the head lights is 9.84 ft.
(3) Ensure that the center line of vehicle and the paper
are at a 90 degree angle as shown in the illustration.
(H line)
(4) Engine running.
(5) Draw a horizontal line on the paper where the head
lights of the vehicle are to be.
(6) Draw a vertical line on the paper where the center
line of the vehicle is to be. (V center line)
(7) Take an appropriate measure to avoid affecting the
other light. (V RH and LH lines)
NOTICE:

Disconnect the connector of the other light to avoid
heat affection from the light because the outer lens of
the head light assembly is made of synthetic resin.
When connecting the connector again take care not
to wake the aiming out of adjustment.

When covering the headlight, finish it within 3 min-
utes.
(8) Turn the head lights ON.
(9) Check that the head lights light up the paper as
shown in the illustration.
(10) When the paper is not lighted up properly, adjust the
lights in the vertical or horizontal direction.
HINT:
As shown in the illustration, adjust aiming of the LH and RH
lights along each vertical line respectively.
(d) Vertical Alignment:
Adjust the headlight aimming.
(1) Using adjustment bolt A, adjust the headlight aim-
ing to within the specifiactions.
(2) Make sure the gauge bubble is within the accept-
able range.
HINT:
If the gauge bubble is outside the acceptable range, check that
the vehicle is parked on a level spot.
Readjust the headlight aiming after parking the vehicle on a lev-
el spot.

BE01R±06
I01351
Headlight Beam Level Control Actuator
Height Control SensorHeadlight Beam Level Control ECU
Driver Side Junction Block

ECU±IG Fuse

GAUGE Fuse
± BODY ELECTRICALHEADLIGHT BEAM LEVEL CONTROL SYSTEM
BE±49
2350 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
HEADLIGHT BEAM LEVEL CONTROL SYSTEM
LOCATION
The vehicle shown in this illustration is ºGS400º.
All components of ºGS300º other than the ones used for engine are same as ºGS400º.

BE0H2±08
I01352
Front Fog Lights
Combination Switch

Front Fog Light Switch Driver Side Junction Block

FOG Fuse

Fog Light Relay

Body ECU No.2
BE±52
± BODY ELECTRICALFOG LIGHT SYSTEM
2353 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
FOG LIGHT SYSTEM
LOCATION
The vehicle shown in this illustration is ºGS400º.
All components of ºGS300º other than the ones used for engine are same as ºGS400º.

BE0H0±06
I01353
Turn Signal LightsEngine Room No.1
Junction Block

TURN HAZ Fuse
Ignition Switch
Combination Switch

Turn Signal Switch
Hazard Warning Switch
Turn Signal Lights Turn Signal Lights
Driver Side Junction Block

GAUGE FuseCowl Side No.5
Junction Block

Turn Signal Flaher
± BODY ELECTRICALTURN SIGNAL AND HAZARD WARNING SYSTEM
BE±55
2356 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
TURN SIGNAL AND HAZARD WARNING SYSTEM
LOCATION
The vehicle shown in this illustration is ºGS400º.
All components of ºGS300º other than the ones used for engine are same as ºGS400º.

BE023±07
I01357
Headlight Cleaner Relay Washer Tank

Headlight Cleaner Motor
Headlight Cleaner Switch
Headlight Cleaner Nozzle
Engine Room No.1
Junction Block

H±LP CLN H±Fuse
Ignition Switch
Driver Side Junction Block

WASHER Fuse
BE±72
± BODY ELECTRICALHEADLIGHT CLEANER SYSTEM
2373 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
HEADLIGHT CLEANER SYSTEM
LOCATION
The vehicle shown in this illustration is ºGS400º.
All components of ºGS300º other than the ones used for engine are same as ºGS400º.