instrument panel Lexus HS250h 2010 Basic Information Before Operation / LEXUS 2010 HS250H QUICK GUIDE OWNERS MANUAL (OM75023U)

3
OverviewInstrument Panel
Headlight switch
Automatic high
beam

Turn signal lever
Fog light switch
*1
P.33
P.35
P.24
Power (ignition) switch P.17
See P.6
See P.7Windshield wiper and
washer switch
P.36
EV drive mode switch
Eco mode switch
Power mode switch P.21
P.20
P.20
Hybrid transmission shift lever*1
P position switch P.20
Tilt and telescopic steering control switch *1
Pre-collision brake off switch *1
Tilt and telescopic steering control lever *1
Parking brake pedal *1
Hood lock release lever *1 Door lock switches
P.78
Power window switches P.79
Window lock switch
P.79
Inside door lock buttons
P.78
Driving position
memory switches
*1
Multi-information
display
P.22

5
OverviewInstrument Panel
Without navigation system
With navigation system
Emergency flasher switch*1
Air
conditioning
system
P. 65
Air conditioning
system
P. 57
Emergency flasher
switch
*1
Navigation system P.41
Rear window and
outside rear view
mirror defogger
switch
*1
Rear window and
outside rear view
mirror defogger
switch
*2

7
OverviewInstrument Panel
VIEW switch 
Windshield wiper
de-icer switch
*1, *3
P. 32
VSC OFF switch*1
Trunk opener*1
Fuel filler door
opener
P.80
Rear sunshade
switch
*1
HUD (Head-up Dis-
play) position
adjustment switch

P. 30
HUD (Head-up Dis-
play) contrast adjust-
ment switch

P. 30
HUD (Head-up Display)
main switch
P. 30
Instrument panel light control switches*1
Outside rear view
mirror switches
*1
Headlight cleaner switch *1
NAVI switch 
P. 30

19
Hybrid transmission
■Shifting the shift lever
Shift lever
Operate the shift lever gently and
ensure correct shifting operation.
When shifting to the D or R
positions, move the shift lever
along the shift gate.
To shift to the N position, slide
the shift lever to the left and hold
it. The shift position will change
to N.
Shifting to B is only possible
when shift position D is selected.
The shift lever will always return
to this position after a shifting
operation.
When shifting from P to D or R, from D
to R, or from R to D, ensure that the
brake pedal is being depressed and the
vehicle is stationary.
Shift position indicator
When selecting the shift position, make
sure that the shift position has been
changed to the desired position by
checking the shift position indicator pro-
vided on the instrument panel.
When any shift position other than D or
B is selected, the arrow toward B disap-
pears from the shift position indicator.
■Shift position purpose
*: For good fuel economy and noise reduction, the D position should usually be used.
Shift positionFunction
PParking the vehicle/starting the hybrid system
RReversing
NNeutral
DNormal driving*
BApplying moderate engine braking when driving down hills or on
steep slopes

33
Headlights
U.S.A.
Turn off the daytime running light
system.
The headlights, parking lights
and so on turn on and off auto-
matically (when the “POWER”
switch is in ON mode).
The side marker, parking, tail,
license plate and instrument
panel lights turn on.
The headlights and all the lights
listed above turn on.
Canada
The headlights, parking lights
and so on turn on and off auto-
matically (when the “POWER”
switch is in ON mode).
The side marker, parking, tail,
license plate and instrument
panel lights turn on.
The headlights and all the lights
listed above turn on.