ratio Lexus IS200d 2011 s User Guide

51
1-2. Opening, closing and locking the doors and trunk
1
Before driving
IS250/220d/200d_EE
English
Hereby, Toyota Motor Corporation, declares that this TMLF-1 is in
compliance with the essential requirements and other relevant provisions
of Directive 1999/5/EC.:w
Finnish
Toyota Motor Corporation vakuuttaa täten että TMLF-1 tyyppinen laite on
direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin
muiden ehtojen mukainen.:w
Dutch
Hierbij verklaart Toyota Motor Corporation dat het toestel TMLF-1 in
overeenstemming is met de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG.:w
French
Par la présente Toyota Motor Corporation déclare que l'appareil TMLF-1
est conforme aux exigences essentielles et aux autres dispositions
pertinentes de la directive 1999/5/CE.:w
Swedish
Härmed intygar Toyota Motor Corporation att denna TMLF-1 står I
överensstämmelse med de väsentliga egenskapskrav och övriga
relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Danish
Undertegnede Toyota Motor Corporation erklærer herved, at følgende
udstyr TMLF-1 overholder de væsentlige krav og øvrige relevante krav i
direktiv 1999/5/EF.
German
Hiermit erklärt Toyota Motor Corporation, dass sich das Gerät TMLF-1 in
Übereinstimmung mit den grundlegenden Anforderungen und den
übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.:w
Greek

ü 
þ 

52
1-2. Opening, closing and locking the doors and trunk
IS250/220d/200d_EE
Italian
Con la presente Toyota Motor Corporation dichiara che questo TMLF-1 è
conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite
dalla direttiva 1999/5/CE.
Spanish
Por medio de la presente Toyota Motor Corporation declara que el
TMLF-1 cumple con los requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Portuguese
Toyota Motor Corporation declara que este TMLF-1 está conforme com
os requisitos essenciais e outras disposições da Directiva 1999/5/CE.:w
Maltese
Hawnhekk, Toyota Motor Corporation, jiddikjara li dan TMLF-1
jikkonforma mal-
«ti
¥ijiet essenzjali u ma provvedimenti o
«rajn relevanti li
hemm fid-Dirrettiva 1999/5/EC.
Estonian
Käesolevaga kinnitab Toyota Motor Corporation seadme TMLF-1
vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist
tulenevatele teistele asjakohastele sätetele.
Hungarian
Alulírott, Toyota Motor Corporation nyilatkozom, hogy a TMLF-1 megfelel
a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb
elõírásainak.
Slovak
Toyota Motor Corporation týmto vyhlasuje, že TMLF-1 sp

a základné
požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
Czech
Toyota Motor Corporation tímto prohlašuje, že tento TMLF-1 je ve shod

se základními požadavky a dalšími p
íslušnými ustanoveními sm
rnice
1999/5/ES.
Slovenian
Toyota Motor Corporation izjavlja, da je ta TMLF-1 v skladu z bistvenimi
zahtevami in ostalimi relevantnimi doloþili direktive 1999/5/ES.

53
1-2. Opening, closing and locking the doors and trunk
1
Before driving
IS250/220d/200d_EE
Lithuanian
Šiuo Toyota Motor Corporation deklaruoja, kad šis TMLF-1 atitinka
esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Latvian
Ar šo Toyota Motor Corporation deklar, ka TMLF-1 atbilst Direkt
¯vas
1999/5/EK b
Ìtiskaj
—m pras
¯b
—m un citiem ar to saist
¯tajiem noteikumiem.:w
Polish
Niniejszym Toyota Motor Corporation o
wiadcza,
*e TMLF-1 jest zgodny z
zasadniczymi wymogami oraz pozostaáymi stosownymi postanowieniami
Dyrektywy 1999/5/EC.
Icelandic
Hér með lýsir Toyota Motor Corporation yfir því að TMLF-1 er í samræmi
við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.
Norwegian
Toyota Motor Corporation erklærer herved at utstyret TMLF-1 er i
samsvar med de grunnleggende krav og øvrige relevante krav i direktiv
1999/5/EF.
Montenegro
Ovim, Toyota Motor Corporation, izjavljuje da ovaj TMLF-1 je usklaÿen sa
bitnim zahtjevima i drugim relevantnim odredbama Direktive 1999/5/EC.

54
1-2. Opening, closing and locking the doors and trunk
IS250/220d/200d_EE
CAUTION
Caution regarding interference with electronic devices
People with implanted pacemakers or cardiac defibrillators should main-
tain a reasonable distance between themselves and the smart entry & start
system antennas. (P. 3 9 )
The radio waves may affect the operation of such devices. If necessary,
the entry function can be disabled. Ask any authorized Lexus dealer or
repairer, or another duly qualified and equipped professional, for details,
such as the frequency of radio waves and timing of emitting the radio
waves. Then, consult your doctor to see if you should disable the entry
function.
User of any electrical medical device other than implanted pacemakers
and implanted cardiac defibrillators should consult the manufacturer of
the device for information about its operation under the influence of radio
waves.
Radio waves could have unexpected effects on the operation of such med-
ical devices.
Ask any authorized Lexus dealer or repairer, or another duly qualified and
equipped professional, for details for disabling the entry function.

56
1-2. Opening, closing and locking the doors and trunk
IS250/220d/200d_EE
Operation signals
Doors: The emergency flashers flash to indicate that the doors have been
locked/unlocked. (Locked: Once; Unlocked: Twice)
Windows and moon roof: A buzzer sounds to indicate that the windows and
moon roof are operating.
Door lock buzzer
If a door is not fully closed, a buzzer sounds if an attempt to lock the door is
made. Fully close the door to stop the buzzer, and lock the vehicle once
more.
Alarm
Using the wireless remote control to lock the doors will set the alarm sys-
tem.
Electronic key battery depletion
P. 4 4
When the electronic key battery is fully depleted
P. 4 3 1
Security feature
P. 4 8
Conditions affecting operation
P. 4 2
Customization that can be configured at any authorized Lexus dealer or
repairer, or another duly qualified and equipped professional
Settings (e.g. trunk unlocking function) can be changed.
(Customizable features P. 556)

57
1-2. Opening, closing and locking the doors and trunk
1
Before driving
IS250/220d/200d_EE
CAUTION
When closing the windows or moon roof using wireless remote control
Observe the following precautions.
Failing to do so may result in death or serious injury.
Check to make sure that all passengers do not have any part of their body
in a position where it could be caught when a window or moon roof is
being operated.
To prevent inadvertent power windows and moon roof operation, never let
a small child have and use the wireless remote control.
Jam protection function
Never try jamming any part of your body to activate the jam protection
function intentionally.
The jam protection function may not work if something gets caught just
before the window or moon roof fully closes.

60
1-2. Opening, closing and locking the doors and trunk
IS250/220d/200d_EE
Automatic door locking and unlocking systems
The following functions can be set or cancelled:
*: Vehicles with an automatic transmission only
FunctionOperation
Shift position linked
door locking function*Shifting the shift lever out of P locks all
doors.
Shift position linked
door unlocking func-
tion*Shifting the shift lever to P unlocks all
doors.
Speed linked door lock-
ing functionAll doors are locked when the vehicle
speed is approximately 20 km/h (12 mph)
or higher.
Driver's door linked
door unlocking function
All doors are unlocked when the driver's
door is opened within approximately 45
seconds after turning the “ENGINE
START STOP” switch OFF.

61
1-2. Opening, closing and locking the doors and trunk
1
Before driving
IS250/220d/200d_EESetting and canceling the function
To switch between setting and canceling, follow the procedure
below:
Close all the doors and switch the “ENGINE START
STOP” switch to IGNITION ON mode. (Perform the step 2
within 10 seconds.)
Shift the shift lever to P or N,
press and hold the driver’s door
lock switch (
or ) for
about 5 seconds then release.
The shift lever and switch posi-
tions corresponding to the
desired function to be set are
shown as follows.
Use the same procedure to can-
cel the function.
*: Vehicles with an automatic transmission only
When the setting or canceling operation is complete, all doors are
locked and then unlocked.
STEP1
STEP2
FunctionShift lever posi-
tionDriver’s door
lock switch posi-
tion
Shift position linked door lock-
ing function*
PShift position linked door
unlocking function*
Speed linked door locking func-
tion
NDriver's door linked door unlock-
ing function

68
1-3. Adjustable components (seats, mirrors, steering wheel)
IS250/220d/200d_EE
Linking driving position memory with door unlock operation
Record your driving position to button “1”, “2” or “3” before per-
forming the following.
Carry only the key (including the card key
) to which you want to
link the driving position. If 2 or more keys are in the vehicle, the
driving position cannot be linked properly.

: If equipped
Using the wireless remote control
Turn the “ENGINE START STOP” switch OFF and close
the driver's door.
Press and hold the desired but-
ton (“1”, “2” or “3”) while
pressing on the wireless
remote control until the signal
beeps.
The driving position is recalled
when the driver's door is
unlocked using the entry func-
tion or wireless remote control
and the driver's door is opened.
To prevent unintended triggering of the alarm, open and close a
door once after a driving position has been recorded. (If a door is
not opened within 30 seconds after is pressed, the doors will be
locked again and the alarm will automatically be set.)
In case that the alarm is triggered, immediately stop the alarm.
(P. 102)
STEP1
STEP2

70
1-3. Adjustable components (seats, mirrors, steering wheel)
IS250/220d/200d_EE
Canceling the linked door unlock operation
Turn the “ENGINE START STOP” switch OFF and close the
driver's door.
Using the wireless remote control: While pushing the “SET” but-
ton, press on the wireless remote control until the signal
beeps.
Using the door lock switch: While pressing the “SET” button, press
the lock or unlock side on the door lock switch until the signal
beeps.
Operating the driving position memory after turning the “ENGINE START
STOP” switch OFF
Memorized positions (except for the steering wheel position) can be acti-
vated up to 180 seconds after the driver’s door is opened and another 60 sec-
onds after it is closed again, even after turning the “ENGINE START
STOP” switch OFF.
To cancel seat position recall
Perform any of the following operations.
Push the “SET” button.
Push button “1”, “2” or “3”.
Adjust the seat using the switches (only cancels seat position recall).
If the battery is disconnected
The memorized positions are erased when the battery is disconnected.
CAUTION
Seat adjustment caution
Take care during seat adjustment that the seat does not strike the rear pas-
senger or squeeze your body against the steering wheel.
STEP1
STEP2