reset Lexus IS220d 2012 User Guide

352
3-4. Using the hands-free phone system (for mobile phones)
IS250/220d/200d_EE
Deleting the registered data
Select “Delete Entry” using , and .
Select the desired data to be deleted using , and
.
Deleting speed dials
Select “Del Spd Dial” using , and .
Press the preset button to which the desired speed dial is
registered after the beep.
The name to be deleted will be heard.
Select “Confirm” using , and .
Limitation of number of digits
A phone number that exceeds 24 digits cannot be registered.
STEP1
STEP2
STEP1
STEP2
STEP3

411
4-3. Do-it-yourself maintenance
4
Maintenance and care
IS250/220d/200d_EE
Engine oil consumption
The amount of engine oil consumed depends on the oil viscosity, the
quality of the oil and the way the vehicle is driven.
More oil is consumed under driving conditions such as high speeds and
frequent acceleration and deceleration.
A new engine consumes more oil.
When judging the amount of oil consumption, keep in mind that the oil
may have become diluted, making it difficult to judge the true level
accurately.
Oil consumption: Max. 1.0 L per 1,000 km (1.1 qt./600 miles, 0.9 Imp.
qt./600 miles)
If your vehicle consumes more than 1.0 L (1.1 qt., 0.9 Imp. qt.) every
1000 km (600 miles), contact any authorized Lexus dealer or repairer, or
another duly qualified and equipped professional.
After changing the engine oil (IS220d and IS200d)
The oil change system should be reset. Perform the following procedures:
Switch the display to the odometer (P. 171) when the engine is
running.
Turn the “ENGINE START STOP” switch OFF.
While pressing the trip meter reset button, set the “ENGINE
START STOP” switch to IGNITION ON mode (but do not start the
engine because otherwise the reset mode will be cancelled). Con-
tinue to press and hold the button until the trip meter displays
“000000”.
STEP1
STEP2
STEP3

5
481
5-2. Steps to take in an emergency
When trouble arises
IS250/220d/200d_EE
(Flashing)
(If equipped)
Indicates that there is a
high possibility of a
frontal collision, or that
the pre-crash braking
function is operating.
Slow the vehicle by
applying the brakes.
(On some IS250
models)
Indicates that the fuel
injectors require main-
tenance.Have your Lexus dealer
replenish the injector
cleaner and reset the
message.
Warning messages in the radar cruise mode (if equipped)
In the following instances, there is a possibility that the approach warning
will not illuminate even when vehicle-to-vehicle distance is closing.
When the speed of the vehicle ahead matches or exceeds your vehicle’s
speed.
When the vehicle ahead is traveling at an extremely slow speed.
Immediately after the cruise control speed has been set.
At the instant the accelerator is applied.
Warning messageDetailsCorrection procedure