bluetooth Lexus IS250 2009 Navigation Manual

Finish
OTHER FUNCTIONS
143
D
Sending a tone by the speed tone
You can send a tone by the speed tone.
(For registering the speed tone, see “(b)
Registering the speed tone” on page
146.)
1. Touch “Speed Tone”.
2. Touch the desired switch to send a
tone.
Touch “Settings” to display “Settings”
screen.
You can change the settings of the
phone.
IS F/350/250_Navi_U
(L/O 0808)
— Change the settings of
the Bluetooth rphone

Finish
OTHER FUNCTIONS
152
D
The Bluetooth
rconnection status at
startup
When the “ENGINE START STOP”
switch is in ACCESSORY or IGNITION
ON mode and the Bluetooth ris auto-
matically connected, the connection
check is displayed.
Touch “ON” or “OFF” of “Show
Bluetooth
connection status at start-
up”.

: Bluetooth is a registered trademark of Bluetooth SIG. Inc.
DInitializing the settings
You can initialize the settings.
Touch “Default”.
Touch “Yes”.
IS F/350/250_Navi_U
(L/O 0808)

Finish
OTHER FUNCTIONS
153
(e) Setting the phone book
You can register phone numbers in the
phone book.
Touch “Phone Book” to display the
“Phone Book Management” screen.
You can do the detail settings of phone
book.
DTransferring a telephone number
You can transfer the telephone num-
bers in your Bluetooth rphone to the
system. Up to 1000 person’s data (up to
2 numbers a person) can be registered
in the phone book.
Transfer it while the engine is running.
1. Touch “Transfer” to display the “Se-
lect Group” screen.
2. Select the group you want to transfer
the data to.
3. Touch “Overwrite” or “Add To”.
IS F/350/250_Navi_U
(L/O 0808)

Finish
OTHER FUNCTIONS
154
4. Transfer the phone book data to the
system using the Bluetoothrphone.
This screen appears while transferring. To
cancel it, touch “Cancel”. If the transfer-
ring is interrupted on the way, the phone
book data transferred until then can be
memorized in the system.
5. When this screen is displayed, the
transfer is completed.
When this screen is displayed, try the
transfer operation again.
DRegistering the phone book data
You can register the phone book data.
1. Touch “Register” of “Phone Book”.
2. Touch the desired touch− screen
button to edit the phone book.
3. When you complete the edit, touch
“OK”.
IS F/350/250_Navi_U
(L/O 0808)

Finish
OTHER FUNCTIONS
168
D
Selecting a Bluetooth
rphone
In case you register more than one
Bluetooth rphone, you need to choose
a favorite one.
1. Touch “Settings” to display the
“Settings” screen.
2. Touch “Select Telephone” to display
the “Select Telephone” screen. You can select the Bluetooth
rphone
from a maximum of 6 numbers.
“Empty” is displayed when you have not
registered a Bluetooth rphone yet.
Bluetooth rmark is displayed when you
choose the phone.
Although you can register up to 6
Bluetooth rphones in the system, only one
Bluetooth rphone can function at a time.
3. Touch “OK”.
When the result message is displayed, you
can use the Bluetooth rphone.
IS F/350/250_Navi_U
(L/O 0808)
— Set a Bluetooth rphone

Finish
OTHER FUNCTIONS
169
When another Bluetoothrphone is trying
to connect, this screen is displayed.
Touch “Yes” or “No”.
DDisplaying Bluetooth rinformation
You can see or set the information of the
Bluetooth rphone on the system.
“Device Name” The name of Bluetooth rphone
....
which is displayed on the
screen. You can change it into
a desired name.
“Bluetooth

Device Address”
The address peculiar to the
....
system. You cannot change it.
1. Select the desired phone and touch
“Information”.

: Bluetooth is a registered trademark ofBluetooth SIG. Inc.
IS F/350/250_Navi_U
(L/O 0808)

Finish
OTHER FUNCTIONS
171
D
Changing the Bluetooth
rsettings
You can change the display and settings of
Bluetooth rinformation on the system.
The information displays the following
items.
“Device Name” The name in the Bluetooth r
....
network. You can change it.
“Passkey” The password when you regis-
....
ter your cellular phone in the
system. You can change it into
the figure of 4 −8 digits.
“Bluetooth

Device Address”
The address peculiar to the
....
system. You can not change it.
If you have registered two
Bluetooth rphones with the
same Device Name or Pass-
key and you cannot distinguish
one from the other, refer to it. When you change the device name or
Passkey, do the followings.
1. Touch “Bluetooth
”.
2. Touch “Change” of “Device Name”
or “Passkey”.

: Bluetooth is a registered trademark of
Bluetooth SIG. Inc.
IS F/350/250_Navi_U
(L/O 0808)

Finish
OTHER FUNCTIONS
172
3. Use the software keyboard to input
the device name.
You can input up to 20 characters.
4. Input a Passkey with 4−8 digits.
When you touch A, the input number is de-
leted.
5. When you complete the setting,
touch
.
DInitializing the Bluetooth rsettings
You can initialize the settings.
1. Touch “Default”.
2. Touch “Yes”.
IS F/350/250_Navi_U
(L/O 0808)

Finish
OTHER FUNCTIONS
173
D
Deleting a Bluetooth
rphone
1. Touch “Delete” of “Bluetooth
Tele-
phone”.
2. Select the telephone you want to de-
lete and touch “OK”.
3. Touch “Yes”.
: Bluetooth is a registered trademark of Bluetooth SIG. Inc. When you delete the telephone while
another Bluetooth
rphone is connect-
ing, this message is displayed.
Touch “Yes”.
IS F/350/250_Navi_U
(L/O 0808)

Finish
OTHER FUNCTIONS
174
D
Displaying the information of the
Bluetooth
rphone you delete
You can display the information of the
Bluetooth rphone before you delete it
and you can make sure whether the
telephone you delete is correct or not.
1. Select the telephone you want to dis-
play the information about.
2. When you complete confirming it,
touch
. The speech command system enables
you to operate the navigation system,
audio system, hands−
free system and
air conditioning system by giving a
command.
1. Push the talk switch.
A beep sounds and on screen message is
displayed with an indicator at the top left.
IS F/350/250_Navi_U
(L/O 0808)
Speech command system