display Lexus IS250 2010 Navigation Manual

NAVIGATION SYSTEM: MEMORY POINTS
11 4
(a) Registering preset destinations
1. Push the “SETUP” button.
2. Touch “Navi.” on the “Setup”
screen.
3. Touch “Preset Destinations” on the
“Navigation Settings” screen.
4. Touch “Set”.
5. Enter the location in the same way
as for a destination search.(See “Des-
tination search” on page 62.)
6. Touch a position for this preset des-
tination. When registration of preset destination is
completed, the “Edit Preset Destination”
screen will be displayed.
7. Touch “OK”.
To edit registered information, see “(b)
Editing preset destinations” on page 115.
ISF/IS NAVI (U)
Finish

NAVIGATION SYSTEM: MEMORY POINTS
11 5
(b) Editing preset destinations
1. Push the “SETUP” button.
2. Touch “Navi.” on the “Setup”
screen.
3. Touch “Preset Destinations” on the
“Navigation Settings” screen.
4. Touch “Edit”.
5. Touch the button of the desired pre-
set destination.
6. Touch “Edit” for the item you want to
change.
“Name”: To edit preset destination names.
The names can be displayed on the map.(See page 120.)
“Location”: To edit location information.
(See page 121.)
“Phone #”: To edit telephone numbers.
(See page 121.)
“Icon”: To select icons to be displayed on
the map. (See page 119.)
7. Touch “OK”.
ISF/IS NAVI (U)
Finish
4

NAVIGATION SYSTEM: MEMORY POINTS
11 7
(a) Registering address book entries
1. Push the “SETUP” button.
2. Touch “Navi.” on the “Setup”
screen.
3. Touch “Address Book” on the “Nav-
igation Settings” screen.
4. Touch “New”.
5. Enter the location in the same way
as for a destination search.(See “Des-
tination search” on page 62.)
After the address book entry has been reg-
istered, the “Edit Address Book Entry”
screen will be displayed.
6. Touch “OK”.
To edit registered information, see “(b)
Editing address book entries” on page
118.
INFORMATION
Up to 100 address book entries can
be registered.
ISF/IS NAVI (U)
Finish
4

NAVIGATION SYSTEM: MEMORY POINTS
11 8
(b) Editing address book entries
The icon, name, location and/or telephone
number of a registered address book entry
can be edited.
1. Push the “SETUP” button.
2. Touch “Navi.” on the “Setup”
screen.
3. Touch “Address Book” on the “Nav-
igation Settings” screen.
4. Touch “Edit”.
5. Touch the button of the desired ad-
dress book entry.
6. Touch “Edit” for the item you want to
change.
“Name”: To edit address book entry
names. The names can be displayed on
the map. (See page 120.)
“Location”: To edit location information.
(See page 121.)
“Phone #”: To edit telephone numbers.
(See page 121.)
“Icon”: To select icons to be displayed on
the map. (See page 119.)
7. Touch “OK”.
ISF/IS NAVI (U)
Finish

NAVIGATION SYSTEM: MEMORY POINTS
120
D
To change “Name”
1. Touch “Edit” of “Name”.
2. Enter the name using the alphanu-
meric keys.
Up to 32 characters can be entered.
3. Touch “OK”.
The previous screen will be displayed.
DISPLAYING MEMORY POINT NAMES
The name of an address book entry can be
set to display on the map.
To show the name, touch “On” on the
“Edit Address Book Entry” screen. To
not show it, touch “Off”.
ISF/IS NAVI (U)
Finish

NAVIGATION SYSTEM: MEMORY POINTS
121
D
To change “Location”
1. Touch “Edit” of “Location”.
2. Touch one of the 8 directional but-
tons to move the cursorto the de-
sired point on the map.
3. Touch “OK”.
The previous screen will be displayed.
DTo change “Phone #” (telephone
number)
1. Touch “Edit” of “Phone #”.
2. Enter the number using number
keys.
3. Touch “OK”.
The previous screen will be displayed.
ISF/IS NAVI (U)
Finish
4

NAVIGATION SYSTEM: MEMORY POINTS
123
(a) Registering areas to avoid
1. Push the “SETUP” button.
2. Touch “Navi.” on the “Setup”
screen.
3. Touch “Areas to Avoid” on the “Nav-
igation Settings” screen.
4. Touch “New”.
5. Enter the location in the same way
as for a destination search, or display
the map of the area to be avoided.(See
“Destination search” on page 62.)
6. Scroll the map to the desired point.
“Adjust Location” : To adjust the position
in smaller increments.
7. Touch “Enter”.
8. Touch eitherorto
change the size of the area to be
avoided.
9. Touch “OK”.
INFORMATION
D If a destination is input in the area
to avoid or the route calculation
cannot be made without running
through the area to avoid, a route
passing through the area to be
avoided may be shown.
D Up to 10 locations can be regis-
tered as points/areas to avoid.
ISF/IS NAVI (U)
Finish
4

NAVIGATION SYSTEM: MEMORY POINTS
124
(b) Editing area to avoid
The name, location and/or area size of a
registered area can be edited.
1. Push the “SETUP” button.
2. Touch “Navi.” on the “Setup”
screen.
3. Touch “Areas to Avoid” on the “Nav-
igation Settings” screen.
4. Touch “Edit”.
5. Touch the desired area button.
6. Touch “Edit” for the item you want to
change.
“Name”: To edit the name of the area to
avoid. The names can be displayed on the
map. (See page 125.)
“Location”: To edit area location. (See
page 126.)
“Size”: To edit area size. (See page 126.)
“Active”: To turn on or off the area to avoid
feature. To turn on the feature, touch“On”
on the “Edit Area to Avoid” screen. To turn
off the feature, touch “Off”on the “Edit
Area to Avoid” screen.
7. Touch “OK”.
ISF/IS NAVI (U)
Finish

NAVIGATION SYSTEM: MEMORY POINTS
125
D
To change “Name”
1. Touch “Edit” of “Name”.
2. Enter the name using alphanumeric
keys.
Up to 32 characters can be entered.
3. Touch “OK”.
The previous screen will be displayed.
DISPLAYING NAMES OF AREAS TO BE
AVOIDED
The name of an area to be avoided that
may be displayed on the map can be set.
To show the name, touch “On” on the
“Area to Avoid” screen. To not show it,
touch “Off”.
ISF/IS NAVI (U)
Finish
4

NAVIGATION SYSTEM: MEMORY POINTS
126
D
To change “Location”
1. Touch “Edit” of “Location”.
2. Touch the 8 directional button to
move the cursorto the desired point
on the map.
3. Touch “OK”.
The previous screen will be displayed.
DTo change “Size”
1. Touch “Edit” of “Size”.
2. Touch eitherorto
change the size of the area to be
avoided.
3. Touch “OK”.
The previous screen will be displayed.
ISF/IS NAVI (U)
Finish