Lexus IS300h 2014 Navigation manual

381
1. CONNECTED SERVICES
CONNECTED SERVICES
IS300h/250_Navi_EE
8
1Select “Detail” on the POI information
screen. (→P.379)
2Check that the details of the selected
POI are displayed.
1Select “Feedback”.
2Check that the following screen is dis-
played.
3Select “Submit”.
VIEWING POI DETAILS
No.FunctionPage
Select to view the POI’s de-
tails. If supported by your
search provider, the feed-
back function will be dis-
played.
381
Select a desired picture to
display it in full screen, if
pictures are available.
EVALUATING THE
INFORMATION
Your rating of the selected POI can be
submitted. If the information is incorrect,
you can notify the search provider by se-
lecting the appropriate button.
No.Function
Select to enter your rating.
Select to notify the search provider
of incorrect information.
IS_Navi_EE_53C71E.book 381 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

382
1. CONNECTED SERVICES
IS300h/250_Navi_EE
4. IMPORTING MEMORY POINTS AND STORED ROUTES
1Select “My memory”.
2Select “Memory points”.
POIs and routes searched on Lexus
portal site can be downloaded to the
system and set as a destination or saved
as memory points.
There are 2 methods to download POIs
and routes to the system:
(a) After saving the POIs and routes at
Lexus portal site, they can be down-
loaded via the internet.
(b) After saving the POIs and routes at
Lexus portal site, download them to
a USB memory.
The POIs and routes can then be
downloaded via the USB memory.
When downloading POIs and routes to
the system, both procedures are per-
formed in the vehicle.
For details about POI and route search-
es on Lexus portal site and downloading
POIs and routes to a USB memory, re-
fer to www.my.lexus.eu
.
REGISTERING AN EXTERNAL
POINT AS A MEMORY POINT
AND ROUTES FROM THE
INTERNET
To access Lexus portal site via the inter-
net, the cellular phone or Wi-Fi
® must
already be registered with the system.
(→P.376)
IS_Navi_EE_53C71E.book 382 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

383
1. CONNECTED SERVICES
CONNECTED SERVICES
IS300h/250_Navi_EE
8
3Select “External points”.
4Check that a confirmation screen is dis-
played when the operation is complete.
1Press the button to release the lock and
lift the armrest.
2Open the cover and connect a USB
memory.
zTurn on the power of the USB memory if it
is not turned on.
zTo edit memory points and routes:
→P.1 5 6 , 1 6 0
INFORMATION
●
Setting “Automatic memory point down-
load” to “Yes” will automatically download
external points. (→P. 3 8 9 )
• If a screen related to a memory point is
changed to before automatic memory
point download begins, automatic
memory point download will be can-
celled.
●If memory points which have the same
name are already stored in the system,
the system may not update those mem-
ory points.
PROCEDURE FOR
DOWNLOADING MEMORY
POINTS AND ROUTES FROM
A USB MEMORY
IS_Navi_EE_53C71E.book 383 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

384
1. CONNECTED SERVICES
IS300h/250_Navi_EE
3Close the console box.
4Display the “My memory” screen.
(→P.382)
5Select “Copy from USB”.
zIf a password has already been set, enter
the password. For instructions on setting a
password: →P.1 6 8
zIf there are multiple memory points stored
on the USB memory, select the memory
points and routes to be copied and select
“Start”.
6Check that a progress bar is being dis-
played while the data copy is in
progress.
zTo cancel this function, select “Cancel”.
7Check that a confirmation screen is dis-
played when the operation is complete.
INFORMATION
●
Memory points that are located outside
of the map’s data range cannot be regis-
tered.
●A maximum of 500 memory points can
be registered.
●When there are 21 or more memory
points and routes stored on a USB mem-
ory, only 20 memory points and routes
will be displayed at a time.
●Memory points acquired from Lexus por-
tal site can only be registered with the
registered system at the time of acquire-
ment.
●In some cases, memory points and routes
may not be able to be imported. If this
occurs, “Unable to read memory point
data. (Device ID error)” will be displayed.
●If memory points and routes which have
the same name are already stored in the
system, the system may not update those
memory points and routes.
IS_Navi_EE_53C71E.book 384 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

385
1. CONNECTED SERVICES
IS300h/250_Navi_EE
CONNECTED SERVICES
8
5. Street View
1Press the “MENU” button on the
Remote Touch.
2Select “Info”.
3Select “Street View”.
4Select the desired item to search for a
point.The Street View of the desired location
can be viewed. In order to perform
Street View, the system must already be
connected to the internet. (→P.376)
No.Function
Select to set a Street View location
by address or location.
Select to set a Street View location
by a previously selected destination.
(→P.1 2 5 )
Select to set a Street View location
by using the current position.
Select to set a Street View location
by using the last displayed map.
Select to set a Street View location
by using a current destination.
Select to change pages.
IS_Navi_EE_53C71E.book 385 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

386
1. CONNECTED SERVICES
IS300h/250_Navi_EE
5Check that the picture is displayed.
“”, “ ”: Select to change pictures. Up to 6
pictures per location can be displayed.
INFORMATION
●
The Street View function can also be
selected from the following screens:
• Starting route guidance screen
(→P.1 3 3 )
• Online search result screen (→P. 3 7 9 )
●This function is not available while driving.
IS_Navi_EE_53C71E.book 386 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

387
1. CONNECTED SERVICES
IS300h/250_Navi_EE
CONNECTED SERVICES
8
6. Panoramio
1Press the “MENU” button on the
Remote Touch.
2Select “Info”.
3Select “Panoramio”.
4Select the desired item to search for a
point.
5Scroll the map to the desired point
(→P.103) and select .
Users’ pictures on a map, comments
and other information can be viewed. In
order to perform Panoramio, the system
must already be connected to the inter-
net. (→P.376)
No.Function
Select to set a location by address.
(→P.120)
Select to set a location by using the
current position.
Select to set a location by using the
last displayed map.
Select to set a location by using a
current destination.
Select to change pages.
IS_Navi_EE_53C71E.book 387 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

388
1. CONNECTED SERVICES
IS300h/250_Navi_EE
6Check that the thumbnails screen is dis-
played.■VIEWING A FULL SCREEN PIC-
TURE
1Select “Info” on the title bar.
2Check that a full screen view of the pic-
ture is displayed.
No.Function
Select to display the selected pic-
ture’s title bar.
Select to display the selected picture
in full screen.
Select to magnify or reduce the map
scale.
Select to display the previous 6 pic-
tures.
Select to update the thumbnails
screen. Up to 6 pictures are dis-
played.
Select to download up to another 6
pictures when there are more than 6
pictures available.
No.Function
Select to view user comments.
Select to set as a destination.
(→P.131) If a destination has already
been set, “A d d t o ” and “Replace
” will be displayed.
“Add to ”: Select to add a destina-
tion.
“Replace ”: Select to delete the
existing destination(s) and set a new
one.
INFORMATION
●
This function is not available while driving.
IS_Navi_EE_53C71E.book 388 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

389
IS300h/250_Navi_EE
CONNECTED SERVICES
8
2. SETUP
1. CONNECTED SERVICE SETTINGS
1Press the “MENU” button on the
Remote Touch.
2Select “Setup”.
3Select “Navigation”.
4Select “Connected service”.
5Select the items to be set.
6Select “Save”.
The following detailed connected ser-
vice settings can be set.
IS_Navi_EE_53C71E.book 389 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

390
2. SETUP
IS300h/250_Navi_EE
CONNECTED SERVICE
SETTINGS SCREENNo.Function
When connecting, the cost warn-
ing display can be set on or off by
selecting “Yes” or “No”.
When the system is started up,
the automatic downloading of
memory points and routes can be
set on or off by selecting “Yes” or
“No”. For memory points and
routes to be automatically down-
loaded, auto connection needs to
be set to “Yes”.
When connecting in a roaming
area, the display of the roaming
warning can be set on or off by
selecting “Yes” or “No”.
When connecting to Lexus portal
site, the required portal user
name and password can be re-
membered by selecting “Yes” or
“No”. When “Yes” is selected, the
user name and password does
not need to be entered when ac-
cessing Lexus portal site.
The desired search engine can
be selected. (→P.391)
Online search history can be de-
leted. (→P.391)
When a different user uses the
system, the user name and pass-
word can be changed. (→P.391)
Your Lexus portal site user name
and password can be deleted
from the system. (→P.391)
Select to reset all setup items.
IS_Navi_EE_53C71E.book 390 ページ ２０１４年５月２９日　木曜日　午前１１時２２分