navigation lexus LC500 2018 Navigation Manual

26
-$@-$I@/BWJ@0.&@ &&

1-2. Navigation operation

2
27
-$@-$I@/BWJ@0.&@ &&

2
Basic function
Basic function
2-1. Basic information before opera-
tion
Initial screen ................................... 28
How to use the Remote Touch 28
Operating the screen................... 31
Using side display ........................ 33
Entering letters and numbers/list
screen operation ....................... 35
Linking multi-information display
and navigation system ............. 38
2-2. Network settings
Registering/Connecting
Bluetooth® device ................... 39
Setting Bluetooth® details ........ 43
Connecting to internet via Wi-Fi®
............................................................. 51
2-3. Other settings
General settings ........................... 56
Voice settings ................................ 60
Vehicle settings............................... 61
For vehicles sold outside Europe, some of the functions cannot be operated
while driving.

32
-$@-$I@/BWJ@0.&@ &&

2-1. Basic information before operation
section.
Side display icon
The side menu can be displayed by moving the cursor over an icon and selecting the
desired screen.
Sub menu icon
Move the cursor over an icon to display its sub menu.
Side display
The following functions can be displaye d and operated on the side display.
• Navigation system ( P.33)
•Audio ( P.34)
• Vehicle information*
• Air conditioning*
*: Refer to the “OWNER’S MANUAL”
C
D
E

33
2
-$@-$I@/BWJ@0.&@ &&

2-1. Basic information before operation
Basic function
To change the screen displayed on the
side display, use the screen buttons on
the right side of the display.
1 Select the desired button.
Select to display the navigation
screen. ( P.33)
Select to display the audio control
screen. ( P.34)
Select to display the vehicle infor-
mation screen.*
Select to display the air condition-
ing control screen.*
Select to hide/show the side dis-
play.
*: Refer to the “OWNER’S MANUAL”
1 Use pinch to zoom when the cursor
is on a button in the map screen.
1 Select , or .
1 Select or to change the
map mode.
 For details about the map mode,
refer to “Switching the map mode”.
( P.72)
Using side display
Switching the side display
A
B
C
D
E
Navigation system
Map scale
Orientation of the map
Switching the map mode

38
-$@-$I@/BWJ@0.&@ &&

2-1. Basic information before operation
Linking multi-information
display and navigation sys-
tem
The following functions of the navi-
gation system are linked with the
multi-information display in the
instrument cluster:
 Navigation
 Audio
 Phone
etc.
These functions can be operated
using the meter control switches on
the steering wheel. For details,
refer to “OWNER’S MANUAL”.

39
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
2-2.Network settings
■Registering from navigation sys-
tem
1 Turn the Bluetooth® connection
setting of your cellular phone on.
 This function is not available when
Bluetooth® connection setting of
your cellular phone is set to off.
2 Press the “MENU” button on the
Remote Touch.
3 Select “Setup”.
4 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
 When there is no registered device,
operations up to this point can also
be performed by pressing the
switch on the steering wheel.
5 Depending on situation, different
screen is displayed.
 If there is a registered device, select
“Add new device”.
 If there is no registered device,
select “Yes”.
6 When this screen is displayed,
search for the device name dis-
played on the screen of your
Bluetooth® device.
 For details about operating the
Bluetooth® device, see the manual
that comes with it.
 Depending on the type of
Bluetooth® phone or portable
device, if you do not enable the dis-
play of certain screens, your device
may not be displayed on the device
list. Refer to the instruction manual
Registering/Connecting
Bluetooth® device
To use the hands-free system, it is
necessary to register a Bluetooth®
phone with the system.
Once the phone has been regis-
tered, it is possible to use the hands-
free system.
This operation cannot be per-
formed while driving.
Registering a Bluetooth® phone
for the first time

40
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
included with the Bluetooth® phone
or portable device for more details.
7 Register the Bluetooth® device
using your Bluetooth® device.
 A PIN code is not required for SSP
(Secure Simple Pairing) compatible
Bluetooth® devices. Depending on
the type of Bluetooth® device being
connected, a message confirming
registration may be displayed on the
Bluetooth® device’s screen.
Respond and operate the
Bluetooth® device according to the
confirmation message.
8 Check that the following screen is
displayed, indicating pairing was
successful.
 The system is connecting to the reg-
istered device.
 At this stage, the Bluetooth® func-
tions are not yet available.
9 Check that “Connected” is dis-
played and registration is complete.
 If an error message is displayed, fol-
low the guidance on the screen to
try again.
●If a cellular phone does not operate prop-
erly after being connected, turn the cellu- lar phone off and on and then connect it again.
■Registering from phone
When registering from the navigation
system is failed, or the phone name
doesn’t appear on the registering
screen, you need to connect the
Bluetooth® phone manually.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Yes” to register the new
phone.
5 Press the button on the Remote
Touch to select “If you cannot find…”
on the bottom of the screen.

59
2
-$@-$I@/BWJ@0.&@ &&

2-3. Other settings
Basic function
(P.59)
Select to adjust the screen display.
( P.59)
Select to adjust the camera display.
( P.59)
Depending on the position of the head-
light switch, the screen changes to day
or night mode. This feature is available
when the headlight is switched on.
1 Select “Day mode”.
●If the screen is set to day mode with the headlight switch turned on, this condition is memorized even with the engine
turned off.
The contrast and brightness of the
screen can be adjusted according to
the brightness of your surroundings.
1 Select “General” or “Camera”.
2 Select the desired item.
 “Display (General)” screen only:
Select or to select the
desired display.
•“Contrast”
“+”: Select to strengthen the contrast of the
screen.
“-”: Select to weaken the contrast of the
screen.
• “Brightness”
“+”: Select to brighten the screen.
“-”: Select to darken the screen.
Registered or changed personal set-
tings will be deleted or returned to
their default conditions.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Delete personal data”.
4 Select “Delete”.
5 Select “Yes” when the confirmation
screen appears.
Examples of settings that can be returned to their default conditions:
 General settings
 Navigation settings
 Audio settings
 Phone settings
 Connected service settings
etc.
Changing between day and night
mode
Adjusting the contrast/brightness
C
D
Deleting personal data

3
63
-$@-$I@/BWJ@0.&@ &&

3
Navigation system
Navigation system
3-1. Basic operation
Quick reference ............................ 64
Map screen operation ............... 69
Map screen information.............. 71
Traffic messages ............................ 76
3-2. Destination search
Search operation .......................... 79
3-3. Route guidance
Starting route guidance............. 90
Route guidance............................. 93
Editing route................................... 95
3-4. Favourite destinations
Registering an entry................... 101
Editing the entry information. 103
3-5. Setup
Map settings................................. 106
Traffic message settings ........... 110
Route preferences settings..... 113
3-6. Tips for the navigation system
GPS (Global Positioning System)
.......................................................... 115
Navigation database updates 117
For vehicles sold outside Europe, some of the functions cannot be operated
while driving.

65
3
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
Navigation system
A short while later after the following methods, the display automatically switches
to map screen:
 Press the “MAP” button on the Remote Touch.
 Press the “MENU” button on the Remote Touch, then select “Destination” on
the “Menu” screen.
■After calculating a route to a new destination
Select to zoom in/out the map scale. ( P.70)
Displays the distance to the next turn with the arrow indicating the turn direc-
tion. When the arrow icon is selected, the last navigation announcement will be
repeated.
Displays information about the destination, such as estimated arrival time,
remaining travel time, distance, and traffic prediction information.
• Each time this area is selected, the inform ation will change between the arrival time and
remaining travel time to the destination.
Displays traffic events on the route.
• The remaining length and the re maining delay time are displayed.
Displays the name of the current street or the next street.
Map screen
A
B
C
D
E