USB lexus LC500 2018 Navigation Manual

161
4
-$@-$I@/BWJ@0.&@ &&

4-6. Tips for operating the audio/visual system
Audio/visual system
■Files in the device
■Files per folder
*1: Only compatible with Windows Media
Audio Standard
*2: Sound source of 48kHz or more is
down-converted to 48kHz/24bit.
*1: Variable Bit Rate (VBR) compatible
*2: Only compatible with Windows Media
Audio Standard
USBDISC
Maximum 9999Maximum 255
USBDISC
Maximum 255-
Corresponding sampling frequency
File typeFrequency (kHz)
MP3 files:
MPEG 1 LAYER 332/44.1/48
MP3 files:
MPEG 2 LSF
LAYER 3
16/22.05/24
WMA files:
Ver. 7, 8, 9*1
(9.1/9.2)
32/44.1/48
AAC files:
MPEG4/AAC-LC
11.025/12/16/22.0
5/24/32/44.1/48
WAV (LPCM)
files*2
8/11.025/12/16/22
.05/24/32/44.1/4
8/88.2/96/176.4/
192
FLAC*2
8/11.025/12/16/22
.05/24/32/44.1/4
8/88.2/96/176.4/
192
ALAC*28/11.025/12/16/22
.05/24/32/44.1/4
8/64/88.2/96
OGG Vorbis*28/11.025/16/22.05
/32/44.1/48
Corresponding bit rates*1
File typeBit rate (kbps)
MP3 files:
MPEG 1 LAYER 332 - 320
MP3 files:
MPEG 2 LSF
LAYER 3
8 - 160
WMA files: Ver. 7, 8CBR 48 - 192
WMA files:
Ver. 9*2 (9.1/9.2)CBR 48 - 320
AAC files:
MPEG4/AAC-LC8 - 320
OGG Vorbis32-500
File typeQuantization bit
rate (bit)
WAV(LPCM) files
16/24FLAC
ALAC
Compatible channel modes
File typeChannel mode
MP3 files
Stereo, joint stereo,
dual channel and
monaural

162
-$@-$I@/BWJ@0.&@ &&

4-6. Tips for operating the audio/visual system
MP3 (MPEG Audio Layer 3),
WMA (Windows Media Audio) and
AAC (Advanced Audio Coding)
are audio compression standards.
 This system can play
MP3/WMA/AAC files on CD-
R/CD-RW/DVD-R/DVD-RW
discs and USB memory.
 This system can play disc recordings
compatible with ISO 9660 level 1
and level 2 and with the Romeo and
Joliet file system and UDF (2.01 or
lower).
 When naming an
MP3/WMA/AAC file, add an
appropriate file extension
(.mp3/.wma/.m4a).
 This system plays back files with
.mp3/.wma/.m4a file extensions as
MP3/WMA/AAC files respectively.
To prevent noise and playback
errors, use the appropriate file
extension.
 This system can play only the first
session/border when using multi
session/border compatible discs.
 MP3 files are compatible with the
ID3 Tag Ver. 1.0, Ver. 1.1, Ver. 2.2 and
Ver. 2.3 formats. This system cannot
display disc title, track title and artist
name in other formats.
 WMA/AAC files can contain a
WMA/AAC tag that is used in the
same way as an ID3 tag.
WMA/AAC tags carry information
such as track title and artist name.
 The emphasis function is available
only when playing MP3 files.
 This system can play back AAC files
encoded by iTunes.
 m3u playlists are not compatible
with the audio player.
 MP3i (MP3 interactive) and MP3-
PRO formats are not compatible
with the audio player.
 The player is compatible with VBR
(Variable Bit Rate).
 When playing back files recorded
as VBR (Variable Bit Rate) files, the
play time will not be correctly dis-
played if the fast forward or reverse
operations are used.
 It is not possible to check folders
that do not include
MP3/WMA/AAC files.
 MP3/WMA/AAC files in folders up
to 8 levels deep can be played.
However, the start of playback may
be delayed when using discs con-
taining numerous levels of folders.
For this reason, we recommend cre-
ating discs with no more than 2 lev-
els of folders.
WMA files2ch
AAC files1ch, 2ch (Dual chan-
nel is not supported)
File typeChannel mode

165
4
-$@-$I@/BWJ@0.&@ &&

4-6. Tips for operating the audio/visual system
Audio/visual system
ital letters and numbers. The “_”
symbol may also be included.)
 Level 2: The file name can have up
to 31 characters (including the sep-
aration mark “.” and file extension).
Each folder must contain fewer than
8 hierarchies.
■MP3
 MP3 is an audio compression stan-
dard determined by a working
group (MPEG) of the ISO (Interna-
tional Standard Organization). MP3
compresses audio data to about
1/10 the size of that on conventional
discs.
■WMA
 WMA (Windows Media Audio) is
an audio compression format devel-
oped by Microsoft®. It compresses
files into a size smaller than that of
MP3 files. The decoding formats for
WMA files are Ver. 7, 8 and 9.
 This product is protected by certain
intellectual property rights of
Microsoft Corporation and third
parties. Use or dist ribution of such
technology outside of this product is
prohibited without a license from
Microsoft or an authorized
Microsoft subsidiary and third par-
ties.
■AAC
 AAC is short for Advanced Audio
Coding and refers to an audio com-
pression technology standard used
with MPEG2 and MPEG4.
■CD/DVD
■USB
Error messages
MessageExplanation
“Check DISC”
It indicates that the
disc is dirty, dam-
aged, or it was
inserted upside
down. Clean the
disc or insert it cor-
rectly.
It indicates a disc
which is not playable
is inserted.
“DISC error”
There is a trouble
inside the system.
Eject the disc.
“Region code error”
It indicates that the
DVD region code is
not set properly.
MessageExplanation
“USB error”
This indicates a
problem in the USB
memory or its con-
nection.
“No music files
found.”
This indicates that
no
MP3/WMA/AAC
files are included in
the USB memory.
“No video files
found.”
This indicates that
no video files are
included in the USB
memory.

171
5
-$@-$I@/BWJ@0.&@ &&

5-1. Speech command system operation
Speech command system
■Media
*1: The audio device must be connected via a USB cable to use the functionality
*2: Available only for iPod/iPhone
■Phone
■Radio
■App
CommandAction
“Play name>”*1Plays tracks from the selected artist and
album/song
“Artist ”*1Plays tracks from the selected artist
“Album ”*1Plays tracks from the selected album
“Song ”*1Plays the selected track
“Play Playlist ”*1, 2Plays tracks from the selected playlist
CommandAction
“Dial ”Call the selected phone number
“Redial”Call the phone number of the latest outgoing call
“Call ”Call the selected phone contact
“Call ”Call the selected phone contact on its selected
phone type
CommandAction
“Station ”Play the selected radio station
CommandAction
“Fuel price”Displays fuel information
“Fuel price at destination”Displays fuel information at your current destina-
tion
“Parking”Displays parking information
“Parking at destination”Displays parking information at your current des-
tination

194
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
2Check that a confirmation screen is
displayed when the operation is
complete.
■For PBAP incompatible but OPP
compatible Bluetooth® phones
1 Select the desired item.
Select to transfer the contacts from
the connected cellular phone.
Follow the steps in “Transfer con-
tacts from device” from step 2.
( P.207)
Select to add a new contact manu-
ally.
Follow the steps in “Registering a
new contact to the contacts list”
from step 2. (P.209)
Select to cancel transferring.
●If your cellular phone is neither PBAP nor OPP compatible, the contacts cannot be
transferred using Bluetooth®. But the contacts can be transferred from USB device. ( P.208)
●Depending on the type of Bluetooth® phone:
• It may be necessary to perform additional steps on the phone when transferring contact data.
• The registered image in the contact list may not transfer depending on the type
of Bluetooth® phone connected.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “Keypad” on the sub
menu and enter the phone number.
4 Select or press the switch
on the steering wheel.
5 Check that the call screen is dis-
played.
●Depending on the type of Bluetooth® phone being connected, it may be neces-
sary to perform additional steps on the phone.
■112 emergency call support
This feature is used to make a 112
emergency call. This function is not
available when the hands-free system
is not connected.
The call has to be placed from a coun-
try where 112 is available.
●The SOS function uses a different system than the ERA-GLONASS system (if equipped).
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “Keypad” on the sub
menu and select “SOS”.
4 Select “112”.
A
B
C
By keypad
SOS

208
-$@-$I@/BWJ@0.&@ &&

7-2. Setup
3Select “Replace contacts” or “Add
contact”.
“Replace contacts”: Select to transfer the contact from the connected cellular phone
and replace the current one.
“Add contact”: Select to transfer the
desired contact data from the connected cellular phone to add to the current one.
4 Transfer the contact data to the sys-
tem using a Bluetooth® phone.
 This operation may be unnecessary
depending on the type of cellular
phone.
 To cancel this function, select “Can-
cel”.
5 Check that a confirmation screen is
displayed when the operation is
complete.
 This function is only for OPP com-
patible Bluetooth® phone.
■Updating the contacts (From the
“History” screen)*
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “History” on the sub
menu and select a contact not yet
registered in the contact list.
4 Select “Update contact”.
5 Select the desired contact.
6 Select a phone type for the phone
number.
*: For PBAP compatible Bluetooth®
phones, this function is available when
“Automatic transfer” is set to off.
( P.206)
Backed-up contact data (“vCard” for-
matted) can be transferred from USB
device or Bluetooth® phone to this
system.
1 Slide the armrest as far back while
pressing the button.
2 Lift the armrest while pulling the
knob.
3 Open the cover and connect a
device or Bluetooth® phone.
From USB

209
7
-$@-$I@/BWJ@0.&@ &&

7-2. Setup
Phone
Turn on the power of the USB
device if it is not turned on.
4 Select “Transfer contacts from
device”.
5 Select “From USB”.
6 Select “USB 1” or “USB 2” when
the multiple USB devices are con-
nected. If a USB device is con-
nected, skip this procedure.
7 Select “Replace contacts” or “Add
contact”. If the contact is not regis-
tered, skip this procedure.
“Replace contacts”: Select to transfer the
contact from the connected USB device or
Bluetooth® phone and replace the current
one.
“Add contact”: Select to transfer the
desired contact data from the connected
USB device or Bluetooth® phone to add
to the current one.
8 Select a desired file from vCard file
list.
9 Check that a confirmation screen is
displayed when the operation is
complete.
●Depending on the type of phone used
and number of files, it may take time to download contacts.
●Downloading may not complete cor-rectly in the following cases:• If the engine switch is
turned off during downloading.
• If the USB device or Bluetooth® phone is
removed before downloading is com- plete.
New contact data can be registered.
Up to 4 numbers per person can be
registered.
1 Select “New contact”.
2 Enter the name and select “OK”.
3 Enter the phone number and select
“OK”.
4 Select the phone type for the
phone number.
5 To add another number to this con-
tact, select “Yes”.
■Registering a new contact in a dif-
ferent way (From the “History”
screen)
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “History” on the sub
menu and select a contact not yet
registered in the contact list.
4 Select “Add to contacts”.
5 Follow the steps in “Registering a
new contact to the contacts list”
from step 2. (P.209)
1 Select “Edit contact”.
2 Select the desired contact.
3 Select next to the name or
desired number.
4 Enter the name or the phone num-
ber and select “OK”.
Registering a new contact to the
contacts list
Editing the contact data

219
8
-$@-$I@/BWJ@0.&@ &&

8-1. Connected services
Connected services
System
The results are displayed.
*: For details about Lexus portal site, refer to www.my.lexus.eu.
Importing favourites and routes: Downloading via the internet
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
Name/operation
Your personal computer and Lexus portal site*
Access Lexus portal site and search POIs and routes.
Lexus portal site*
The POIs and routes are saved on Lexus portal site.
System
Via the internet, the POIs are downloaded to the system.
*: For details about Lexus portal site, refer to www.my.lexus.eu.
Importing favourites and routes : Downloading from a USB memory
Name/operation
Your personal computer and Lexus portal site*
Access Lexus portal site and search POIs and routes.
C
A
B
C
A

220
-$@-$I@/BWJ@0.&@ &&

8-1. Connected services
Lexus portal site*
The POIs and routes are saved on Lexus portal site.
USB memory
The POIs and routes are saved to the USB memory.
System
Via the USB memory, the POIs and routes are downloaded to the system.
*: For details about Lexus portal site, refer to www.my.lexus.eu.
Observe the following precaution:
 Before using this service, it is neces-
sary to access Lexus portal site and
create an account. It needs to make
new account before using con-
nected service.
There are 2 methods to make new
account. ( P.221)
• Obtaining an account via Lexus Portal
site. ( P.221)
• Obtaining an account via the system.
( P.221)
When using a cellular phone to con-
nect to the internet, observe the follow-
ing precautions:
 In order to use this service, a
Bluetooth® PAN compatible cellu-
lar phone with sufficient network
coverage and a SIM card with a
contract that allows access to the
internet are required.
 When using the connected ser-
vices, depending on your phone
subscription, some related fees
might apply.
 When a cellular phone is used in a
roaming situation (when outside the
geographical coverage area of
mobile network provider) connec-
tion fees may apply.
B
C
D
Before using connected services

222
-$@-$I@/BWJ@0.&@ &&

8-1. Connected services
To access Lexus portal site via the
internet, the cellular phone or Wi-Fi®
must already be registered with the
system. ( P.221)
Online search
New establishments or establish-
ments that are not registered in the
system can be set as a destination.
In order to perform an online
search, the system must already be
connected to the internet.
The followings are the online
search related functions.
 Search box P.79
 POI search P.85
 POI details P.87
Importing favourites and
stored routes
POIs and routes searched on Lexus
portal site can be downloaded to
the system and saved as favourites.
There are 2 methods to download
POIs and routes to the system:
(a) After saving the POIs and
routes on Lexus portal site, they can
be downloaded via the internet.
(b) After saving the POIs and
routes on Lexus portal site, down-
load them to a USB memory.
The POIs and routes can then be
downloaded via the USB memory.
When downloading POIs and
routes to the system, both proce-
dures are performed in the vehicle.
For details about POI and route
searches on Lexus portal site and
downloading POIs and routes to a
USB memory, refer to
www.my.lexus.eu.
Registering an external point as
a favourite and routes from the
internet