change time lexus LC500 2018 Navigation Manual

6
-$@-$I@/BWJ@0.&@ &&

This manual explains the operation of
the system. Please read this manual
carefully to ensure proper use. Keep
this manual in your vehicle at all times.
The screen shots in this document and
the actual screens of the system differ
depending on whether the functions
and/or a contract existed and the map
data available at the time of producing
this document.
In some situations when changing
between screens, it may take longer
than normal for the screen to change,
the screen may be blank momentarily
or noise may be displayed.
Please be aware that the content of this
manual may be different from the sys-
tem in some cases, such as when the
system’s software is updated.
The navigation system is one of the
most technologically advanced vehi-
cle accessories ever developed. The
system receives satellite signals from
the Global Positioning System (GPS)
operated by the U.S. Department of
Defense. Using these signals and other
vehicle sensors, the system indicates
your present position and assists in
locating a desired destination.
The navigation system is designed to
select efficient routes from your pres-
ent starting location to your destina-
tion. The system is also designed to
direct you to a destination that is unfa-
miliar to you in an efficient manner.
Map database is made based on
Harman International maps, whose
information source comes from HERE
maps. The calculated routes may not
be the shortest nor the least traffic con-
gested. Your own personal local knowl-
edge or “short cut” may at times be
faster than the calculated routes.
The navigation system’s database
includes Point of Interest categories to
allow you to easily select destinations
such as restaurants and hotels. If a des-
tination is not in the database, you can
enter the street address or a major
intersection close to it and the system
will guide you there.
The system will provide both a visual
map and audio instructions. The audio
instructions will announce the distance
remaining and the direction to turn
when approaching an intersection.
These voice instructions will help you
keep your eyes on the road and are
timed to provide enough time to allow
you to maneuver, change lanes or slow
down.
Please be aware that all current vehicle
navigation systems have certain limita-
tions that may affect their ability to per-
form properly. The accuracy of the
vehicle’s position depends on satellite
conditions, road configuration, vehicle
condition or other circumstances. For
more information on the limitations of
Introduction
Navigation system owner’s manual
Navigation system

13
1
-$@-$I@/BWJ@0.&@ &&

1-1. Basic function
Quick guide
WARNING
●For safety reasons, drivers should avoid performing operations as much as possible while driving. Performing
operations while driving may cause the driver to mistakenly operate the steer-ing wheel, which may lead to an acci-
dent. Stop the vehicle before using. Furthermore, avoid looking at the screen as much as possible while driv-
ing.
●Always follow the actual traffic regula- tions and drive according to the road conditions. Routes displayed by the
destination guidance may include routes where the vehicle is prohibited from entering due to changes to speed
limit signs and routes where the road is too narrow to pass through.
NOTICE
●To prevent the 12-volt battery from becoming fully depleted, do not use
the remote touch for long periods of time while the engine/hybrid system is turned off.

49
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
The Bluetooth® settings can be con-
firmed and changed.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Detailed settings”.
5 Select the desired item to be set.
Select to set Bluetooth® connec-
tion on/off. ( P.49)
Select to change the automatic
connection priority of the regis-
tered Bluetooth® devices. ( P.49)
Select to edit the system informa-
tion. ( P.50)
Select to reset all setup items.
1 Select “Bluetooth* power”.
When “Bluetooth* power” is on:
The Bluetooth® device is automatically
connected when the engine switch
is in ACCESSORY or
IGNITION ON mode .
When “Bluetooth* power” is off:
The Bluetooth® device is discon-
nected, and the system will not connect
to it next time.
●While driving, the auto connection state can be changed from off to on, but can-not be changed from on to off.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
The automatic connection priority of
the registered Bluetooth® devices can
be changed.
1 Select “Preferred device settings”.
2 Select the desired item to be set.
Select to set automatic connection
priority on/off.
Select to change the automatic
connection priority of the regis-
tered Bluetooth® phones.
“Detailed settings” screen
Changing “Bluetooth* power”
A
B
C
D
Setting automatic connection
priority
A
B

56
-$@-$I@/BWJ@0.&@ &&

2-3. Other settings
2-3.Other settings
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select the items to be set.
 “Clock”
Select to change the time zone, set
the daylight saving time on/off and
set the automatic adjustment of the
clock on/off. ( P.57)
 “Language”
Select to change the language.
 “Display”
Select to adjust the contrast and
brightness of the screens, turn the
screen off, etc. ( P.58)
 “Voice recognition lang.”
Select to change the voice recogni-
tion language.
 “Theme setting”
Select to change the screen theme
setting.
 “Units of measurement”
Select to change the unit of measure
for distance/fuel consumption.
 “Auto change to screen”
Select to set automatic screen
changes from the audio/air condi-
tioning control screen to the previ-
ous screen to on/off. When set to
on, the screen will automatically
return to the previous screen from
the audio/air conditioning control
screen after 20 seconds.
 “Selection sound”
Select to set the selection sounds
on/off.
 “Pointer sound”
Select to set the pointer sounds
on/off.
 “Error sound”
Select to set the error sounds on/off.
 “Pointer sound volume”
Select to adjust the pointer sound
volume.
General settings
Settings are available for automatic
screen change, operation sounds,
etc.
Displaying the general settings
screen
General settings screen

57
2
-$@-$I@/BWJ@0.&@ &&

2-3. Other settings
Basic function
“Feedback force”
Select to adjust the level of the feed-
back force (vibration) to the
touchpad, when selecting a screen
button.
 “Cursor speed”
Select to adjust the pointer speed.
 “Multi-touch command”
Select to set the multi-touch com-
mand on/off.
 “Delete keyboard history”
Select to delete the keyboard his-
tory.
 “Memorise keyboard history”
Select to set the memorize key-
board history on/off.
 “Delete search history”
Select to delete the search history.
 “Delete personal data”
Select to delete personal data.
( P.59)
 “Software update”
Select to update software versions.
For details, contact any Lexus
retailer or Lexus authorized
repairer, or any reliable repairer.
 “Gracenote database update”
Select to update Gracenote data-
base versions. For details, contact
any Lexus retailer or Lexus autho-
rized repairer, or any reliable
repairer.
 “Software information”
Select to display the software infor-
mation. Notices related to third
party software used in this product
are enlisted. (This includes instruc-
tions for obtaining such software,
where applicable.)
Used for changing the time zone and
setting of daylight saving time and
automatic time adjustment on/off.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Clock”.
4 Select the items to be set.
Select to change the time zone.
( P.58)
Select to set daylight saving time
on/off.
Select to set automatic adjustment
of the clock by GPS on/off. When
set to on, the system will automati-
cally adjust the clock to the current
position’s time zone when the vehi-
cle moves to a different time zone.
When set to off, the clock can be
Clock settings
A
B
C

58
-$@-$I@/BWJ@0.&@ &&

2-3. Other settings
manually adjusted. (P.58)
1 Select “Time zone”.
2 Select the desired time zone.
 If “Other” is selected, the zone can
be adjusted manually. Select “+” or
“-” to adjust the time zone.
When “Auto adjust by GPS” is turned
“Off”, the clock can be manually
adjusted.
1 Select the desired item.
Select “+” to set the time forward
one hour and “-” to set the time
back one hour.
Select “+” to set the time forward
one minute and “-” to set the time
back one minute.
Select to round to the nearest hour.
e.g.
1:00 to 1:29  1:00
1:30 to 1:59  2:00
The contrast and brightness of the
screen display and the image of the
camera display can be adjusted. The
screen can also be turned off, and/or
changed to either day or night mode.
(For information regarding
audio/visual screen adjustment:
 P.124)
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Display”.
4 Select the items to be set.
Select to turn the screen off. To turn
it on, press any button on the audio
control switch or on the Remote
Touch.
Select to turn day mode on/off.
Setting the time zone
Manual clock setting
A
B
C
Display settings (screen adjust-
ment)
A
B

65
3
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
Navigation system
A short while later after the following methods, the display automatically switches
to map screen:
 Press the “MAP” button on the Remote Touch.
 Press the “MENU” button on the Remote Touch, then select “Destination” on
the “Menu” screen.
■After calculating a route to a new destination
Select to zoom in/out the map scale. ( P.70)
Displays the distance to the next turn with the arrow indicating the turn direc-
tion. When the arrow icon is selected, the last navigation announcement will be
repeated.
Displays information about the destination, such as estimated arrival time,
remaining travel time, distance, and traffic prediction information.
• Each time this area is selected, the inform ation will change between the arrival time and
remaining travel time to the destination.
Displays traffic events on the route.
• The remaining length and the re maining delay time are displayed.
Displays the name of the current street or the next street.
Map screen
A
B
C
D
E

70
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
2Press the button on the Remote
Touch.
 Press the touch pad to return to the
current position.
3 Select the desired entry.
Select to register in favourites list.
To change the icon, name, etc.:
( P.103)
Select to set as a destination.
( P.90)
Select to display the Street View.
( P.224)
1 Select on the map.
2 Select “+” or “-” to change the scale
of the map screen.
The scale of the map screen can also be changed on the touchpad of the Remote Touch with your finger.
Pinch out on the touchpad to zoom in and pinch in to zoom out. ( P.30)
●The scale of the map screen can also be changed the following ways:
• Dragging the scale bar marking to the desired point.
●Each time “Automatic map zoom” is selected, the automatic map zoom is turned on/off.
The default automatic zoom level can be selected. ( P.109)
●The scale range is from 10 m to 1000 km (10 yd. to 600 miles).
●After the scale has been changed, the new scale indicator will be displayed for a while.
A
B
C
Map scale

71
3
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
Navigation system
The map layout can be changed
between 3D heading-up, 2D heading-
up and 2D north-up by selecting the
map layout button.
: 3D Heading-up symbol
The direction of vehicle travel is always up.
: North-up symbol
Regardless of the direction of vehicle
travel, north is always up.
: Heading-up symbol
The direction of vehicle travel is always up.
●Each time map layout button is selected,
the map layout changes as follows: 3D heading-up 2D north-up2D heading-up
Various information can be displayed
on the map.
The speed limit of the road currently
being traveled on can be displayed.
Displays information about the
speed limits icon and limited speed
on the current road.
*:If equipped
Buildings can be displayed in 3D on
the map.
●This feature is displayed on the map in
Map layoutMap screen information
Displaying various information
on the map
Speed limits*
3D buildings
A

85
3
-$@-$I@/BWJ@0.&@ &&

3-2. Destination search
Navigation system
6Select “Town” or “Code” to enter
the town name or postal code.
7 Select “No.” or “Intersection” to
enter a house number or intersec-
tion name.
 It is not possible to enter a house
number and intersection at the
same time.
8 Select “Calculate”.
●If a unique street name is entered (only 1
in the country), then “Calculate” can also be selected. If “Calculate” is selected when only “Town” or “Code” has been
entered, a route search starts with the centre of the town entered as the destina-
tion.
●When is selected, entered data other
than “Country” will be deleted.
Search for a destination from POI
database in the system.
When the system is connected to the
internet, a web search is available.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Other”.
3 Select “POI”.
4 Enter the POI name and select
“Search”.
Select to change the searching
area. ( P.86)
Select to narrow down the POI cat-
egory. ( P.87)
Select to display the list of previous
search word. ( P.87)
5 Check that the search results are
displayed. Select the desired POI.
Select to display a full list view. The
distance to the POIs can be
checked.
 When button on the Remote
Touch is pressed, the search method
buttons are displayed.
POIs can be searched using web
search.
• For detailed setting about online search:
 P.229
Searching by POIs
A
B
C
A