key lexus LC500 2018 Navigation Manual

29
2
-$@-$I@/BWJ@0.&@ &&

2-1. Basic information before operation
Basic function
that button and the Remote Touch
feedback force (vibration) is gener-
ated by the touchpad.
This feedback force can be
adjusted. ( P.56)
 Press the “MENU” button on the
Remote Touch to display the menu
screen. ( P.16)
 The map screen can be displayed by
pressing the “MAP” button on the
Remote Touch. ( P.69)
 When is displayed on the
screen, select or press the
button on the Remote Touch
to return to the previous screen.
●Perform touchpad operations using a fin- ger. Do not use nails or other objects like
pens, etc.
●Perform pointer movement operations
using only one finger. The pointer can not be operated by using more than one fin-ger.
●When water or othe r foreign materials are on the touchpad, a malfunction may
occur. In those cases, wipe off the water or foreign materials and wait about 30 seconds before operating the touchpad.
●In the following cases, there is a possibility that the touchpad may not react nor-
mally: • When wearing gloves, etc.• When operated with a wet hand.
• When a film, paint-like substance, etc., is on the touchpad.• Near a TV tower, electrical power plant,
gas station, large display, airport or other facility that generate s strong radio waves or electrical noise.
• When wireless devices, such as portable radios and mobile phones are nearby.• When the following metal items are
placed on the touchpad: Coins
Keys Metal parts of a wallet or purseA card in which aluminum foil, etc., is
attached A box of cigarettes that uses aluminum foil
Disposable hand warmers Media such as CD/DVDs, USB cables, etc.
• When the temperature is -20°C (-4°F) or less
●If a hand or object was placed on the touchpad when the engine switch is in ACCESSORY or IGNI-
TION ON mode , the touchpad may not react normally. In those cases, remove what was set on the
touchpad and operate it after waiting about 30 seconds. If there still no reac-tion, turn off the engine switch switch> and then turn it to ACCESSORY or IGNITION ON mode again.
●Clean the touchpad frequently, as the reaction of the touch operation may
worsen if the touchpad is dirty. In order to prevent malfunctions when cleaning the touchpad, turn the engine switch switch> off.
Operations are performed by touching
the touchpad with your finger.
NOTICE
●Do not allow the Remote Touch to
come into contact with food, liquid, stickers or lit cigarettes as doing so may cause damage.
●Do not subject the Remote Touch to
excessive pressure or strong impact as doing so may cause damage.
●Do not push the touchpad with a strong force or use a sharp pointed
object to operate the pad, as it is possi- ble to cause damage.
Touchpad gestures

35
2
-$@-$I@/BWJ@0.&@ &&

2-1. Basic information before operation
Basic functionWhen searching by an address, name,
etc., or entering data, letters and num-
bers can be entered via the screen.
Text field. Entered character(s) will
be displayed.
Select to erase one character.
Select and hold to continue erasing
characters.
Select to display a list of predictive
text candidates when there is more
than one.* ( P.35)
Select to make a space on cursor.
Select to change character and
keyboard types.
Select to change character and
keyboard types. ( P.35)
Select to enter desired characters.
Select to display predictive text
candidates for entered text.*
( P.35)
*: These functions are not available in
some languages.
1 Select “Change type”.
2 Select the desired character and
keyboard.
●Depending on the conditions data is being entered, it may not possible to
change keyboard characters.
When text is input, the system predicts
the text that may complete the cur-
rently unconfirmed text and displays
predictive replacement candidates
that match the beginning of the text.
1 Input text.
Entering letters and num-
bers/list screen operation
Entering letters and numbers
A
B
C
D
E
F
G
H
Changing character and key-
board type
Displaying predictive text candi-
dates*

57
2
-$@-$I@/BWJ@0.&@ &&

2-3. Other settings
Basic function
“Feedback force”
Select to adjust the level of the feed-
back force (vibration) to the
touchpad, when selecting a screen
button.
 “Cursor speed”
Select to adjust the pointer speed.
 “Multi-touch command”
Select to set the multi-touch com-
mand on/off.
 “Delete keyboard history”
Select to delete the keyboard his-
tory.
 “Memorise keyboard history”
Select to set the memorize key-
board history on/off.
 “Delete search history”
Select to delete the search history.
 “Delete personal data”
Select to delete personal data.
( P.59)
 “Software update”
Select to update software versions.
For details, contact any Lexus
retailer or Lexus authorized
repairer, or any reliable repairer.
 “Gracenote database update”
Select to update Gracenote data-
base versions. For details, contact
any Lexus retailer or Lexus autho-
rized repairer, or any reliable
repairer.
 “Software information”
Select to display the software infor-
mation. Notices related to third
party software used in this product
are enlisted. (This includes instruc-
tions for obtaining such software,
where applicable.)
Used for changing the time zone and
setting of daylight saving time and
automatic time adjustment on/off.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Clock”.
4 Select the items to be set.
Select to change the time zone.
( P.58)
Select to set daylight saving time
on/off.
Select to set automatic adjustment
of the clock by GPS on/off. When
set to on, the system will automati-
cally adjust the clock to the current
position’s time zone when the vehi-
cle moves to a different time zone.
When set to off, the clock can be
Clock settings
A
B
C

87
3
-$@-$I@/BWJ@0.&@ &&

3-2. Destination search
Navigation system
1Select “By category” on the POI
screen.
2 Select the desired category and
subcategories.
“Select all categories”: Select to display all
POI categories.
3 Select the desired POI.
4 Select “Go”.
1 Select “History” on the POI screen.
2 Select the desired previous search
word.
: Select to delete the search word.
3 Select “Search”.
4 Check that the search results are
displayed. Select the desired POI.
5 Select “Go”.
When the online search results is dis-
play, the pictures on the details screen
is displayed.
1 Select the desired POI.
2 Check that the detailed POI infor-
mation is displayed. Then select
“Details”.
Select to display the Street View.
Select to call the phone number.
• If no Bluetooth® phone is available, this
Searching by category
Entering keywords from the history
list
Display the online POI details
A
B

133
4
-$@-$I@/BWJ@0.&@ &&

4-3. Media operation
Audio/visual system
Select to display the menu control
key.
Select to display the menu screen.
Select to select a chapter.
Select and hold to rewind.
Select to stop the video screen.
Select to play/pause.
Select to select a chapter.
Select to display expanded screen
video.
Turn to select a chapter.
Turn and hold to fast for-
ward/rewind.
Turn to select a chapter.
●According to the DVD disc, some menu items can be selected directly. (For details, see the manual that comes with
the DVD disc provided separately.)
●If appears on the screen when a con-
trol is selected, the operation relevant to
the control is not permitted.
Select to display the audio source
selection screen. ( P.121)
Select to return to the control
screen.
Select to display the option screen.
( P.134)
Select to display the key code input
screen.
Control screen
Audio control switch
A
B
C
D
E
F
G
A
B
WARNING
●Conversational speech on some DVDs is recorded at a low volume to emphasize the impact of sound effects.
If you adjust the volume assuming that the conversations represent the maxi-mum volume level that the DVD will
play, you may be startled by louder sound effects or when you change to a different audio source. The louder
sounds may have a significant impact on the human body or pose a driving hazard. Keep this in mind when you
adjust the volume.
Sub menu
A
B
C
D

188
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
7-1.Phone ope ration (Hands -free system for cellular pho nes)
The phone top screen can be reached
by the following method:
1 Press the “MENU” button on the
Remote Touch, then select “Phone”.
Select to display the “History”
screen. ( P.192)
Select to display the “Favourites”
screen. ( P.193)
Select to display the “Contacts”
screen. ( P.193)
Select to display the “Keypad”
screen. ( P.194)
Select to select device if there are
more than 2 phones registered.
Select to display the “Message”
screen. ( P.199)
The following functions can be used on
phone operation:
 Registering/connecting Bluetooth®
device ( P.39)
 Calling on the Bluetooth® phone
( P.192)
 Receiving on the Bluetooth® phone
( P.195)
 Talking on the Bluetooth® phone
( P.196)
The following function can be used on
message function:
 Using the Bluetooth® phone mes-
sage function ( P.199)
The following settings can be made in
navigation system:
 Phone settings (P.204)
 Bluetooth® settings (P.43)
Quick reference
Phone top screen operation
Phone operation
A
B
C
D
E
F
Message function
Setting up a phone

192
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
1Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the desired method to call
from.
■Calling methods from phone top
screen
 By favourite (P.193)
 By call history (P.192)
 By contacts (P.193)
 By keypad (P.194)
 By message (P.199)
■Also the following lists are avail-
able from each function’s screen
 By POI call (P.75)
 By speech command system
( P.168)
Up to 45 of the latest call history items
(missed, incoming and outgoing) can
be selected from the “History”.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “History” on the sub menu
and select the desired contact.
 If the contact which is not registered
on the contact list is selected, the
name is displayed as “Unknown”. In
this case, follow the guidance on the
screen to make a call properly.
4 Check that the call screen is dis-
played.
●The icons of call type are displayed.
: Missed call
: Incoming call
: Outgoing call
●When making a call to the same number continuously, only the most recent call is listed in call history.
●When a phone number registered in the contact list is received, the name is dis-
played.
●Number-withheld calls are also memo-
rized in the system.
●International phone calls may not be
Calling on the Bluetooth®
phone
After a Bluetooth® phone has been
registered, a call can be made using
the hands-free system. There are
several methods by which a call can
be made, as described below.
Calling methods on the
Bluetooth® phone
By call history

194
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
2Check that a confirmation screen is
displayed when the operation is
complete.
■For PBAP incompatible but OPP
compatible Bluetooth® phones
1 Select the desired item.
Select to transfer the contacts from
the connected cellular phone.
Follow the steps in “Transfer con-
tacts from device” from step 2.
( P.207)
Select to add a new contact manu-
ally.
Follow the steps in “Registering a
new contact to the contacts list”
from step 2. (P.209)
Select to cancel transferring.
●If your cellular phone is neither PBAP nor OPP compatible, the contacts cannot be
transferred using Bluetooth®. But the contacts can be transferred from USB device. ( P.208)
●Depending on the type of Bluetooth® phone:
• It may be necessary to perform additional steps on the phone when transferring contact data.
• The registered image in the contact list may not transfer depending on the type
of Bluetooth® phone connected.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “Keypad” on the sub
menu and enter the phone number.
4 Select or press the switch
on the steering wheel.
5 Check that the call screen is dis-
played.
●Depending on the type of Bluetooth® phone being connected, it may be neces-
sary to perform additional steps on the phone.
■112 emergency call support
This feature is used to make a 112
emergency call. This function is not
available when the hands-free system
is not connected.
The call has to be placed from a coun-
try where 112 is available.
●The SOS function uses a different system than the ERA-GLONASS system (if equipped).
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “Keypad” on the sub
menu and select “SOS”.
4 Select “112”.
A
B
C
By keypad
SOS

196
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
displayed correctly depending on the type of cellular phone you have.
●The ringtone that has been set in the “Sounds” screen sounds when there is an incoming call. Depending on the type of
Bluetooth® phone, both the system and
Bluetooth® phone may sound simultane- ously when there is an incoming call. ( P.204)
●The incoming call display mode can be set. ( P.205)
Main display
Select to display the keypad to send
tones. ( P.197)
Select to send tones. This button
only appears when a number that
contains a (w) is dialed in hands-
free mode. ( P.197)
Select to adjust your voice volume
that the other party hears from their
speaker. ( P.198)
Select to mute your voice to the
other party.
Select to mute navigation’s route
guidance during talking on the
phone.
Select to change handset modes
Talking on the Bluetooth®
phone
While talking on the phone, this
screen is displayed. The operations
outlined below can be performed
on this screen.
This screen can also be displayed
on the side display.
Call screen operation
A
B
C
D
E
F

197
7
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
Phone
between hands-free and cellular
phone.
Select to talking/holding with the
other party*. ( P.198)
Select to hang up the phone.
*: This function may not be available
depending on the type of Bluetooth®
phone.
Side display
Select to mute your voice to the
other party.
Select to change handset modes
between hands-free and cellular
phone.
Select to hang up the phone.
Select to start talking/holding with
the other party*. ( P.198)
Select to switch to the main display.
*: This function may not be available
depending on the type of Bluetooth®
phone.
●When cellular phone call is changed to hands-free call, the hands-free screen will
be displayed and its functions can be operated on the screen.
●Changing between cellular phone call and hands-free call can be performed by
operating the cellular phone directly.
●Transferring methods and operations will
be different depending on the type of cel- lular phone you have.
●For the operation of the cellular phone, see the manual that comes with it.
●This screen can be di splayed on the main display or side display. ( P.205)
■By keypad
This operation cannot be performed
while driving.
1 Select “0-9” on the sub menu.
2 Enter the desired number.
■By selecting “Release tones”
“Release tones” appear when a contin-
uous tone signal(s) containing a (w) is
registered in the contact list.
1 Select “Release tones” on the sub
menu.
●A continuous tone signal is a character string that consists of numbers and the
characters p or w. (e.g. 056133w0123p#1 )
●When the “p” pause tone is used, the tone data up until the next pause tone will be automatically sent after 2 seconds have
elapsed. When the “w” pause tone is used, the tone data up until the next pause tone will be automatically sent
after a user operation is performed.
●Release tones can be used when auto-
mated operation of a phone based ser- vice such as an answering machine or bank phone service is desired. A phone
number with continuous tone signals can be registered in the contact list.
●Tone data after a “w” pause tone can be operated on speech command during a call.
G
H
A
B
C
D
E
Sending tones