light lexus LC500 2018 Navigation Manual

12
-$@-$I@/BWJ@0.&@ &&

1-1. Basic function
1-1.Basic function
Microphone (P.168, 190)
Steering switches ( P.146, 168, 190)
Display
Audio control switch ( P.120)
Remote Touch ( P.14)
Touchpad ( P.28)
USB/AUX port ( P.122)
●When the temperature is -20°C (-4°F) or less, the navigation system may not operate.
●When the LCD screen is viewed at an angle, it looks lighter or darker.
●When light from the sun or another external light source strikes the screen,
the screen is difficult to see.
●When wearing sunglasses with polarized
lenses, the screen looks lighter or darker.
●The above illustration is for a left-hand
drive vehicle.
Display and operation switches
Names of each part
A
B
C
D
E
F
G

56
-$@-$I@/BWJ@0.&@ &&

2-3. Other settings
2-3.Other settings
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select the items to be set.
 “Clock”
Select to change the time zone, set
the daylight saving time on/off and
set the automatic adjustment of the
clock on/off. ( P.57)
 “Language”
Select to change the language.
 “Display”
Select to adjust the contrast and
brightness of the screens, turn the
screen off, etc. ( P.58)
 “Voice recognition lang.”
Select to change the voice recogni-
tion language.
 “Theme setting”
Select to change the screen theme
setting.
 “Units of measurement”
Select to change the unit of measure
for distance/fuel consumption.
 “Auto change to screen”
Select to set automatic screen
changes from the audio/air condi-
tioning control screen to the previ-
ous screen to on/off. When set to
on, the screen will automatically
return to the previous screen from
the audio/air conditioning control
screen after 20 seconds.
 “Selection sound”
Select to set the selection sounds
on/off.
 “Pointer sound”
Select to set the pointer sounds
on/off.
 “Error sound”
Select to set the error sounds on/off.
 “Pointer sound volume”
Select to adjust the pointer sound
volume.
General settings
Settings are available for automatic
screen change, operation sounds,
etc.
Displaying the general settings
screen
General settings screen

57
2
-$@-$I@/BWJ@0.&@ &&

2-3. Other settings
Basic function
“Feedback force”
Select to adjust the level of the feed-
back force (vibration) to the
touchpad, when selecting a screen
button.
 “Cursor speed”
Select to adjust the pointer speed.
 “Multi-touch command”
Select to set the multi-touch com-
mand on/off.
 “Delete keyboard history”
Select to delete the keyboard his-
tory.
 “Memorise keyboard history”
Select to set the memorize key-
board history on/off.
 “Delete search history”
Select to delete the search history.
 “Delete personal data”
Select to delete personal data.
( P.59)
 “Software update”
Select to update software versions.
For details, contact any Lexus
retailer or Lexus authorized
repairer, or any reliable repairer.
 “Gracenote database update”
Select to update Gracenote data-
base versions. For details, contact
any Lexus retailer or Lexus autho-
rized repairer, or any reliable
repairer.
 “Software information”
Select to display the software infor-
mation. Notices related to third
party software used in this product
are enlisted. (This includes instruc-
tions for obtaining such software,
where applicable.)
Used for changing the time zone and
setting of daylight saving time and
automatic time adjustment on/off.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Clock”.
4 Select the items to be set.
Select to change the time zone.
( P.58)
Select to set daylight saving time
on/off.
Select to set automatic adjustment
of the clock by GPS on/off. When
set to on, the system will automati-
cally adjust the clock to the current
position’s time zone when the vehi-
cle moves to a different time zone.
When set to off, the clock can be
Clock settings
A
B
C

59
2
-$@-$I@/BWJ@0.&@ &&

2-3. Other settings
Basic function
(P.59)
Select to adjust the screen display.
( P.59)
Select to adjust the camera display.
( P.59)
Depending on the position of the head-
light switch, the screen changes to day
or night mode. This feature is available
when the headlight is switched on.
1 Select “Day mode”.
●If the screen is set to day mode with the headlight switch turned on, this condition is memorized even with the engine
turned off.
The contrast and brightness of the
screen can be adjusted according to
the brightness of your surroundings.
1 Select “General” or “Camera”.
2 Select the desired item.
 “Display (General)” screen only:
Select or to select the
desired display.
•“Contrast”
“+”: Select to strengthen the contrast of the
screen.
“-”: Select to weaken the contrast of the
screen.
• “Brightness”
“+”: Select to brighten the screen.
“-”: Select to darken the screen.
Registered or changed personal set-
tings will be deleted or returned to
their default conditions.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Delete personal data”.
4 Select “Delete”.
5 Select “Yes” when the confirmation
screen appears.
Examples of settings that can be returned to their default conditions:
 General settings
 Navigation settings
 Audio settings
 Phone settings
 Connected service settings
etc.
Changing between day and night
mode
Adjusting the contrast/brightness
C
D
Deleting personal data

108
-$@-$I@/BWJ@0.&@ &&

3-5. Setup
day or night mode depending on
the position of the headlight switch.
Select to always display the map
screen in day mode.
Select to always display the map
screen in night mode.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “Arrival information”.
6 Select the desired item.
Select to set the arrival information
off.
Select to display the arrival time on
the map screen.
Select to display the remaining time
on the map screen.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “Speed limits”.
6 Select the desired item.
Select to display the speed limits on
the map.
Select to receive an audible warn-
ing, if the speed limit will be
exceeded by a certain range.
Select to set the speed warning
threshold. ( P.108)
*:If equipped
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “Speed limits”.
6 Select “Speed warning threshold”.
Arrival information
Speed limits*
B
C
A
B
C
Speed warning threshold
A
B
C

120
-$@-$I@/BWJ@0.&@ &&

4-1. Basic operation
4-1.Basic operation
The audio control screen can be
reached by the following methods:
Using the audio control switch
1 Press the “RADIO” or “MEDIA”
button.
Using the Remote Touch
1 Press the “MENU” button on the
Remote Touch, then select “Radio”
or “Media”.
The audio functions can also be displayed and operated on the side display. ( P.33)
■Control screen
■Audio control switch
•Using the radio ( P.126)
• Playing an audio CD or
MP3/WMA/AAC disc ( P.130)
• Playing a DVD ( P.132)
• Playing a USB memory ( P.135)
• Playing an iPod ( P.137)
• Playing a Bluetooth® device
( P.139)
• Using the Miracast™ ( P.142)
•Using the AUX port ( P.144)
• Using the steering wheel audio
switches ( P.146)
• Audio system settings ( P.148)
●The position and shapes of the buttons may differ slightly between right-hand
drive vehicles and left-hand drive vehi- cles.
Quick reference
Functional overview

155
4
-$@-$I@/BWJ@0.&@ &&

4-6. Tips for operating the audio/visual system
Audio/visual system
tension power lines, lightening or elec-
trical motors. This results in static.
 This DVD player is intended for use
with 4.7 in. (12 cm) discs only.
 Extremely high temperatures can
keep the DVD player from working.
On hot days, use the air condition-
ing system to cool the inside of the
vehicle before using the player.
 Bumpy roads or other vibrations
may make the DVD player skip.
 If moisture gets into the DVD player,
the discs may not be able to be
played. Remove the discs from the
player and wait until it dries.
■DVD player
DVD logo is a trademark of DVD For-
mat/Logo Licensing Corporation.
 Use only discs marked as shown
above. The following products may
not be playable on your player:
•SACD
•dts CD
• Copy-protected CD
•DVD-Audio
•Video CD
•DVD-RAM
DVD player and disc
WARNING
●The DVD player uses an invisible laser
beam which could cause hazardous radiation exposure if directed outside the unit. Be sure to operate the player
correctly.
Audio CDs
DVD video
discs
DVD-R/RW
discs

156
-$@-$I@/BWJ@0.&@ &&

4-6. Tips for operating the audio/visual system
Special shaped discs
Transparent/translucent discs
Low quality discs
Labeled discs
 Handle discs carefully, especially
when inserting them. Hold them on
the edge and do not bend them.
Avoid getting fingerprints on them,
particularly on the shiny side.
 Dirt, scratches, warping, pin holes
or other disc damage could cause
the player to skip or to repeat a sec-
tion of a track. (To see a pin hole,
hold the disc up to the light.)
 Remove discs from the players
when not in use. Store them in their
plastic cases away from moisture,
NOTICE
●Do not use special shaped, transpar- ent/translucent, low quality or labeled discs such as those shown in the illus-
trations. The use of such discs may damage the player, or it may be impos-sible to eject the disc.
●This system is not designed for use of
Dual Discs. Do not use Dual Discs because they may cause damage to the player.
●Do not use discs with a protection ring.
The use of such discs may damage the player, or it may be impossible to eject the disc.
●Do not use printable discs. The use of
such discs may damage the player, or it may be impossible to eject the disc.

157
4
-$@-$I@/BWJ@0.&@ &&

4-6. Tips for operating the audio/visual system
Audio/visual system
heat and direct sunlight.
To clean a disc: Wipe it with a soft, lint-
free cloth that has been dampened
with water. Wipe in a straight line from
the centre to the edge of the disc (not
in circles). Dry it with another soft, lint-
free cloth. Do not use a conventional
record cleaner or anti-static device.
■CD-R/RW and DVD-R/RW discs
 CD-R/CD-RW discs that have not
been subject to the “finalizing pro-
cess” (a process that allows discs to
be played on a conventional CD
player) cannot be played.
 It may not be possible to play CD-
R/CD-RW discs recorded on a
music CD recorder or a personal
computer because of disc charac-
teristics, scratches or dirt on the
disc, or dirt, condensation, etc. on
the lens of the unit.
 It may not be possible to play discs
recorded on a personal computer
depending on the application set-
tings and the environment. Record
with the correct format. (For details,
contact the appropriate application
manufacturers of the applications.)
 CD-R/CD-RW discs may be dam-
aged by direct exposure to sunlight,
high temperatures or other storage
conditions. The unit may be unable
to play some damaged discs.
 If you insert a CD-RW disc into the
player, playback will begin more
slowly than with a conventional CD
or CD-R disc.
 Recordings on CD-R/CD-RW can-
not be played using the DDCD
(Double Density CD) system.
■DVD video discs
This DVD player conforms to
NTSC/PAL color TV formats. DVD
video discs conforming to another for-
mat such as SECAM cannot be used.
Region codes: Some DVD video discs
have the following region code indicat-
ing which countries the DVD video
disc can be played in on this DVD
player. If you attempt to play an inap-
propriate DVD video disc on this
player, error message appears on the
screen. Even if the DVD video disc
does not have a region code, there are
cases when it cannot be used.
CodeCountry
ALLAll countries
2Europe
5Eastern Europe, Russia

159
4
-$@-$I@/BWJ@0.&@ &&

4-6. Tips for operating the audio/visual system
Audio/visual system
PCM, Dolby Digital and MPEG audio
format DVDs. Other decoded types
cannot be played.
Title and chapter: Video and audio pro-
grams stored in DVD video discs are
divided into parts by title and chapter.
Title: The largest unit of the video and
audio programs stored on DVD video
discs. Usually, one movie, one album,
or one audio program is assigned as a
title.
Chapter: A unit smaller than that of
title. A title comprises of several chap-
ters.
■Certification
●Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and
the double-D symbol are trademarks of Dolby Laboratories.
■Certification
 “Made for iPod” and “Made for
iPhone” mean that an electronic
accessory has been designed to
connect specifically to iPod or
iPhone, respectively, and has been
certified by the developer to meet
Apple performance standards.
 Apple is not responsible for the
operation of this device or its com-
pliance with safety and regulatory
standards. Please note that the use
of this accessory with iPod or
iPhone, may affect wireless perfor-
mance.
 iPhone, iPod, iPod nano, and iPod
touch are trademarks of Apple Inc.,
registered in the U.S. and other
countries. Lightning is a trademark
of Apple Inc.
 The Lightning connector works with
iPhone 6s Plus, iPhone 6s, iPhone
SE, iPhone 6 Plus, iPhone 6, iPhone
5s, iPhone 5c, iPhone 5, iPod touch
(5th and 6th generation), and iPod
nano (7th generation).
 The 30-pin connector works with
iPhone 4s, iPhone 4, iPhone 3GS,
iPhone 3G, iPhone, iPod touch (1st
through 4th genera tion), and iPod
nano (1st through 6th generation).
 USB works with iPhone 6s Plus,
iPhone 6s, iPhone SE, iPhone 6
Plus, iPhone 6, iPhone 5s, iPhone
5c, iPhone 5, iPhone 4s, iPhone 4,
iPhone 3GS, iPhone 3G, iPod
touch (1st through 6th generation),
and iPod nano (1st through 7th gen-
eration).
 Bluetooth® technology works with
iPhone SE, iPhone 6s Plus, iPhone
6s, iPhone 6 Plus, iPhone 6, iPhone
5s, iPhone 5c, iPhone 5, iPhone 4s,
iPhone 4, iPhone 3GS, iPhone 3G,
and iPod touch (2nd through 6th
generation), and iPod nano (7th
iPod