traction control lexus LC500 2018 Owner's Manual

62
-$@-$I@0.@0.&@ &&

1-3. Hybrid system
1-3.Hybrid system
The illustration is an example for explanation and may differ from the actual item.
Gasoline engine
Electric motor (traction motor)
■When stopped/during start off
The gasoline engine stops* when the
vehicle is stopped. During start off, the
electric motor (traction motor) drives
the vehicle. When the accelerator
pedal is only lightly depressed, such as
when traveling on a level surface or
down a gentle slope, the engine is
stopped* and the electric motor (trac-
tion motor) is used.
When the shift position is in N, the
hybrid battery (traction battery) is not
Hybrid system features (LC500h)
Your vehicle is a hybrid vehicle. It has characteristics different from conven-
tional vehicles. Be sure you are closely familiar with the characteristics of your
vehicle, and operate it with care.
The hybrid system combines the use of a gasoline engine and an electric motor
(traction motor) according to driving conditions, improving fuel efficiency and
reducing exhaust emissions.
In addition to the conventional system, exclusive control is performed for four
driving conditions (starting off, acce lerating, low-speed driving and high-
speed cruising) to optimize the drive force and fuel efficiency, allowing for a
more powerful drive and a higher fuel efficiency.
System components
A
B

65
1
-$@-$I@0.@0.&@ &&

1-3. Hybrid system
For safety and security
The illustration is an example for explanation and may differ from the actual item.
Warning label
Power control unit
Electric motor (traction motor)
Hybrid battery (traction battery)
Service plug
High voltage cables (orange)
Air conditioning compressor
■Running out of fuel
When the vehicle has run out of fuel and the hybrid system cannot be started, refuel the
vehicle with at least enough gasoline to make the low fuel level warning light ( P.373) go off. If there is only a small
amount of fuel, the hybrid system may not
be able to start. (The standard amount of fuel is about 12.1L [3.2 gal., 2.7 Imp.gal.], when the vehicle is on a level surface. This
value may vary when the vehicle is on a slope. Add extra fuel when the vehicle is inclined.)
Hybrid system precautions (LC500h)
Take care when handling the hybrid system , as it is a high voltage system (about
650 V at maximum) as well as contains parts that become extremely hot when
the hybrid system is operating. Obey the warning labels attached to the vehi-
cle.
System components
A
B
C
D
E
F
G

156
-$@-$I@0.@0.&@ &&

4-1. Before driving
WARNING
■When starting the vehicle
LC500: Always keep your foot on the
brake pedal while stopped with the engine running. This prevents the vehicle from creeping.
LC500h: Always keep your foot on the brake pedal while stopped with the
“READY” indicator is illuminated. This prevents the vehicle from creeping.
■When driving the vehicle
●Do not drive if you are unfamiliar with the location of the brake and accelera-tor pedals to avoid depressing the
wrong pedal.
• Accidentally depressing the accelera-
tor pedal instead of the brake pedal will result in sudden acceleration that may lead to an accident.
• When backing up, you may twist your body around, leading to a difficulty in
operating the pedals. Make sure to operate the pedals properly.
• Make sure to keep a correct driving posture even when moving the vehicle only slightly. This allows you to depress
the brake and accelerator pedals properly.
• Depress the brake pedal using your right foot. Depressing the brake pedal using your left foot may delay
response in an emergency, resulting in an accident.
●LC500h: The driver should pay extra attention to pedestrians when the vehi-
cle is powered only by the electric motor (traction motor). As there is no engine noise, the pedestrians may mis-
judge the vehicle’s movement.
●Do not drive the vehicle over or stop the vehicle near flammable materials.The exhaust system and exhaust gases
can be extremely hot. These hot parts may cause a fire if there is any flamma-ble material nearby.
●During normal driving, do not turn off the engine . Turning
the engine off while driving will not cause loss of steering or braking control, however, power
assist to the steering will be lost. This will make it more difficult to steer smoothly, so you should pull over and
stop the vehicle as soon as it is safe to do so. In the event of an emergency, such as if
it becomes impossible to stop the vehi- cle in the normal way: P.360
●Use engine braking (downshift) to maintain a safe speed when driving
down a steep hill. Using the brakes continuously may cause the brakes to overheat and lose
effectiveness. ( P.173, 179)
●Do not adjust the positions of the steering wheel, the seat, or the inside or outside rear view mirrors while driv-
ing. Doing so may result in a loss of vehicle control.
●Always check that all passengers’ arms, heads or other parts of their body are not outside the vehicle.
■When driving on slippery road sur-
faces
●Sudden braking, acceleration and
steering may cause tire slippage and reduce your ability to control the vehi-cle.
●Sudden acceleration, engine braking
due to shifting, or changes in engine speed could cause the vehicle to skid, resulting in an accident.
●After driving through a puddle, lightly
depress the brake pedal to make sure that the brakes are functioning prop-erly. Wet brake pads may prevent the
brakes from functioning properly. If the brakes on only one side are wet and not functioning properly, steering con-
trol may be affected.

181
4
-$@-$I@0.@0.&@ &&

4-2. Driving procedures
Driving
sages on the multi-information display.
■After recharging/reconnecting the 12- volt battery
 P.325
■Customization
Settings (e.g. Reverse warning buzzer) can
be changed. (Customizable features: P.423)
Shift lever
Operate the shift lever gently and securely
in the direction of the arrow on the shift
position indicator.
To shift to N, slide the shift lever in the
direction of the arrow and hold it.
Release the shift lever after each shifting
operation to allow it to return to its regular
position ( ).
Shifting to M is only possible when the shift
position is in D.
When shifting from P to N, D or R, from N,
D or R to P, from D to R, or from R to D,
ensure that the brake pedal is being
depressed and the vehicle is stationary.
Shift position indicator
Meter display:
The current shift position is highlighted.
When any shift position other than D or M
is selected, the arrow toward M and M
WARNING
■When driving on slippery road sur- faces
Do not accelerate or shift the shift posi- tion suddenly. Sudden changes in engine braking may
cause the vehicle to spin or skid, resulting in an accident.
NOTICE
■Hybrid battery (traction battery) charge
If the shift position is in N, the hybrid bat- tery (traction battery) will not be
charged. To help prevent the battery from discharging, avoid leaving the N position selected for an extended period
of time.
■Situations where shift control system malfunctions are possible
If any of the following situations occur, shift control system malfunctions are possible. Immediately stop the vehicle in
a safe place on level ground, apply the parking brake, and then contact any authorized Lexus retailer or Lexus
authorized repairer, or any reliable repairer.
●When the warning message indicating the shift control system appears on the
multi-information display.
●The display indicates that no shift posi- tion is selected for more than a few seconds.
Shifting the shift lever
A
B

262
-$@-$I@0.@0.&@ &&

4-5. Using the driving support systems
■ECB (Electronically Controlled
Brake System)
The electronically controlled system
generates braking force correspond-
ing to the brake operation
■ABS (Anti-lock Brake System)
Helps to prevent wheel lock when the
brakes are applied suddenly, or if the
brakes are applied while driving on a
slippery road surface
■Brake assist
Generates an increased level of brak-
ing force after the brake pedal is
depressed when the system detects a
panic stop situation
■VSC (Vehicle Stability Control)
Helps the driver to control skidding
when swerving suddenly or turning on
slippery road surfaces
■Secondary Collision Brake (if
equipped)
When the airbag sensor detects a colli-
sion, the brakes and brake lights are
automatically controlled to reduce the
vehicle speed and that helps reduce
the possibility of further damage due to
a secondary collision.
■TRC (Traction Control)
Helps to maintain drive power and pre-
vent the drive wheels from spinning
when starting the vehicle or accelerat-
ing on slippery roads
■Hill-start assist control
Helps to reduce the backward move-
ment of the vehicle when starting on an
uphill
■VGRS (Variable Gear Ratio Steer-
ing) (if equipped)
Adjusts the front wheel turning angle in
accordance with the vehicle speed and
steering wheel movement
■DRS (Dynamic Rear Steering) (if
equipped)
Contributes to the turning characteris-
tics and responsiveness of the vehicle
by slightly adjusting the rear wheel
angle of the vehicle in accordance with
steering wheel movement.
■EPS (Electric Power Steering)
Employs an electric motor to reduce
the amount of effort needed to turn the
steering wheel
■AVS (Adaptive Variable Suspen-
sion System)
By independently controlling the
damping force of the shock absorbers
for each of the 4 wheels according to
Driving assist systems
To keep driving safety and perfor-
mance, the following systems oper-
ate automatically in response to
various driving situations. Be aware,
however, that these systems are
supplementary and should not be
relied upon too heavily when oper-
ating the vehicle.
Summary of the driving assist
systems

263
4
-$@-$I@0.@0.&@ &&

4-5. Using the driving support systems
Driving
the road and driving conditions, this
system helps riding comfort with supe-
rior vehicle stability, and helps good
vehicle posture
Also, the damping force changes
depending on the selected driving
mode. ( P.242)
■LDH (Lexus Dynamic Handling
system) (if equipped)
Provides integrated control of the
VGRS, DRS and EPS. Contributes to
turning characteristics at low speeds,
responsiveness at medium speeds and
safety at high speeds by controlling the
steering angle of the front and rear
wheels in accordance with the steering
wheel operation and vehicle speed.
■VDIM (Vehicle Dynamics Inte-
grated Management)
Provides integrated control of the
ABS, brake assist, TRC, VSC, hill-start
assist control, EPS, VGRS (if
equipped) and DRS (if equipped) sys-
tems
Helps to maintain vehicle stability when
swerving on slippery road surfaces by
controlling the brakes, engine system> output, steering assist (if
equipped), and steering ratio (if
equipped)
■Emergency brake signal
When the brakes are applied suddenly,
the stop lights automatically flash to
alert the vehicle behind
■When the TRC/VSC/ABS systems are operating
The slip indicator light will flash while the TRC/VSC/ABS systems are operating.
■Disabling the TRC system
If the vehicle gets stuck in mud, dirt or snow,
the TRC system may reduce power from the engine to the wheels.
Pressing the switch to turn the sys-
tem off may make it easier for you to rock
the vehicle in order to free it.
To turn the TRC system off, quickly press
and release the switch.
The “Traction Control Turned Off” will be
shown on the multi-information display.
Press the switch again to turn the sys-
tem back on.
■Disabling both TRC and VSC systems
To turn the TRC and VSC systems off, press
and hold the switch for more than 3
seconds while the vehicle is stopped.
The VSC OFF indicator light will come on and the “Traction Cont rol Turned Off” will
be shown on the multi-information display.*

267
4
-$@-$I@0.@0.&@ &&

4-6. Driving tips
Driving
4-6.Driving tips
When using Eco drive mode, the
torque corresponding to the accelera-
tor pedal depression amount can be
generated more smoothly than it is in
normal conditions. In addition, the
operation of the air conditioning sys-
tem (heating/cooling) will be mini-
mized, improving the fuel economy.
( P.242)
The Eco-friendly driving is possible by
keeping the indicate of Hybrid System
Indicator within Eco area. ( P.86)
Shift the shift position to D when
stopped at a traffic light, or driving in
heavy traffic etc. Shift the shift position
to P when parking. When using the N
position, there is no positive effect on
fuel consumption. In the N position, the
gasoline engine operates but electric-
ity cannot be generated. Also, when
using the air conditioning system, etc.,
the hybrid battery (traction battery)
power is consumed.
 Drive your vehicle smoothly. Avoid
abrupt acceleration and decelera-
tion. Gradual acceleration and
deceleration will make more effec-
tive use of the electric motor (trac-
tion motor) without having to use
gasoline engine power.
 Avoid repeated acceleration.
Repeated acceleration consumes
hybrid battery (traction battery)
power, resulting in poor fuel con-
sumption. Battery power can be
restored by driving with the acceler-
ator pedal slightly released.
Make sure to operate the brakes gently
and in a timely manner. A greater
amount of electrical energy can be
regenerated when slowing down.
Repeated acceleration and decelera-
tion, as well as long waits at traffic
lights, will lead to bad fuel economy.
Check traffic reports before leaving
and avoid delays as much as possible.
When driving in a traffic jam, gently
release the brake pedal to allow the
vehicle to move forward slightly while
avoiding overuse of the accelerator
pedal. Doing so can help control
excessive gasoline consumption.
Hybrid vehicle driving tips
(LC500h)
For economical and ecological
driving, pay attention to the follow-
ing points:
Using Eco drive mode
Use of Hybrid System Indicator
Changing the shift position
Accelerator pedal/brake pedal
operation
When braking
Delays

371
7
-$@-$I@0.@0.&@ &&

7-2. Steps to take in an emergency
When trouble arises
■LKA indicator*
*: This light illuminates on the multi-information display.
■Slip indicator
Warning
lightWarning light/Details/Actions
(orange)
Indicates a malfunction in the LKA (Lane-Keeping Assist)
 When “Lane Keeping Assist Unavailable” is displayed on the multi-
information display, turn the LKA (Lane-Keeping Assist) system off,
drive the vehicle for a short time, and then turn the LKA (Lane-Keeping
Assist) system back on. ( P.221)
When a message other than above is displayed, follow the instructions
displayed in the message.
Warning
lightWarning light/Details/Actions
Indicates a malfunction in:
 The VSC (Vehicle Stability Control) system;
 The TRC (Traction Control) system; or
 The hill-start assist control system
The light will flash when the VSC, TRC or ABS system is operating.
 Have the vehicle inspected by any authorized Lexus retailer or Lexus
authorized repairer, or any reliable repairer immediately.

380
-$@-$I@0.@0.&@ &&

7-2. Steps to take in an emergency
The ABS warning light comes on. ( P.369)
●Malfunction in the charging system
The charging system warning light comes on. ( P.368)
●Malfunction in the brake system
The brake system warning light comes on. ( P.368)
●Malfunction in the tire pressure warning system
The tire pressure warning light comes on. ( P.374)
●Remaining fuel level is low
The low fuel level warn ing light comes on. (P.373)
■If “Hybrid System Overheated Reduced Output Power” is shown (LC500h)
This message may be displayed when driving un der severe operating conditions. (For exam- ple, when driving up a long steep hill.) Stop and check. (P.403)
■If “Traction Battery Needs to be Protected Refrain from the Use of N Position” is shown
(LC500h)
The remaining charge for the hybrid battery (tr action battery) is low. As the hybrid battery
(traction battery) cannot be charged when the sh ift position is in N, when stopping the vehi- cle for a long period of time, shift the shift position to P.
■If “Traction Battery needs to be Protected Shift into P to Restart” is shown (LC500h)
The remaining charge for the hybrid battery (tr action battery) is low, because the shift posi- tion has been shifted to N for a long period of time. When moving the vehicle, shift the shift position to P and restart the hybrid system.
■If “Shift to P Before Exiting Vehicle” is shown
The driver’s door is opened without turning the engine switch to off with the
shift position in any position other than P. Shift the shift position to P.
■If “Shift Is in N Release Accele rator Before Shifting” is shown
The accelerator pedal has been depressed when the shift position is in N. Release the accel-
erator pedal and shift the shift position to D or R.
■If “Depress Brake when Vehicle Is Stoppe d Hybrid System May Overheat” is shown (LC500h)
The message may be displayed when the accelerator pedal is depressed to hold the vehicle while the vehicle is stopped on an uphill etc. The hybrid system may overheat. Release the accelerator pedal and depress the brake pedal.
■If “Shift system malfunction Driving unavailable” is shown
There is a malfunction in the shift control system. Have the vehicle inspected by any autho- rized Lexus retailer or Lexus authorized repa irer, or any reliable repairer immediately.
■If “Auto Power Off to Conserve Battery” is shown
LC500: Power was turned off due to the automatic power off function. Next time when starting the
engine, increase the engine speed slightly an d maintain that level for approximately 5 min- utes to recharge the 12-volt battery.
LC500h:

441
-$@-$I@0.@0.&@ &&

Alphabetical index
Alphabetical index
A
A/C................................................................... 280
Air conditioning filter................................ 347
Automatic air conditioning system .. 280
Pollen removal mode ..............................285
ABS (Anti-lock Brake System) ..............262
Function .......................................................... 262
Warning light ...............................................369
Active rear wing ...........................................259
Adaptive Variable Suspension System
(AVS) .............................................................262
Airbag manual on-off system .....................46
Airbags ................................................................35
Airbag manual on-off system ................. 46
Airbag operating conditions................... 37
Airbag precautions for your child ........ 40
Correct driving posture ............................ 29
Curtain shield airbag operating condi-
tions .................................................................. 37
Curtain shield airbag precautions........ 40
General airbag precautions ................... 40
Locations of airbags.................................... 35
Modification and disposal of airbags . 42
Side airbag operating conditions ......... 37
Side airbag precautions ............................ 40
Side and curtain shield airbags operating
conditions ...................................................... 37
Side and curtain shield airbags precau-
tions .................................................................. 40
SRS airbags ..................................................... 35
SRS warning light.......................................369
Air conditioning filter.................................. 347
Air conditioning system............................ 280
Air conditioning filter................................ 347
Automatic air conditioning system .. 280
Pollen removal mode ..............................285
Alarm ................................................................... 76
Alarm .................................................................. 76
Warning buzzer ........................................ 368
Anchor brackets..................................... 49, 60
Antennas (smart entry & start system). 122
Anti-lock Brake System (ABS) ..............262
Function .......................................................... 262
Warning light .............................................. 369
Approach warning ......................................235
Automatic headlight leveling system.... 192
Automatic High Beam ................................ 193
Automatic light control system .................191
Automatic transmission.............................. 173
M mode ........................................................... 178
Paddle shift switches ....................... 177, 178
Snow mode..................................................... 177
Auxiliary net ...................................................293
Average fuel economy .................................94
Average vehicle speed.................................94
AVS (Adaptive Variable Suspension Sys-
tem).................................................................262
B
Back-up lights
Replacing light bulbs ............................... 355
Battery (12-volt battery) ............................325
Battery checking ........................................325
If the 12-volt battery is discharged ....392
Preparing and checking before winter
..........................................................................269
Replacing ...................................................... 398
Warning light .............................................. 368
Battery (traction battery) .............................65
Blind Spot Monitor (BSM) ...................... 248
Blind Spot Monitor function .................254
Rear Crossing Traffic Alert function 256
Brake
Brake hold ...................................................... 189
Fluid.................................................................... 418
Parking brake................................................ 187
Regenerative braking .................................63
Warning light .................................. 368, 373
Warning message .....................................379
Brake assist .....................................................262