fuse lexus LS400 1995 Gauges, Meters and Service Reminder Indicators / 1995 LS400: AIR CONDITIONING AND AUDIO

AIR CONDITIONING AND AUDIO
95
(a) Climate control
SETTING OPERATION − automatic control
1. Push the “AUTO” button.
Air flow quantity, switching of the diffusers, on−off of the air
conditioning, and switching of the air intake between
RECIRCULATED AIR and OUTSIDE AIR are automatically
adjusted. The operation status is shown by each indicator.
When one of the manual control buttons is depressed while
operating in automatic mode, the operation corresponding to
the button depressed is set. Other conditions continue to be
adjusted automatically.
Push the “OFF” button to turn the air conditioning off.
2. Use the “TEMP” or “PASSENGER TEMP” button to set
the desired temperature.
The “TEMP” or “PASSENGER TEMP” button is used to set the
desired temperature. The temperature will be controlled on the
driver and passenger sides simultaneously or individually.
“TEMP” button − Changes the temperature on the driver and
passenger sides simultaneously or the driver side only.
“PASSENGER TEMP” button − Changes the temperature on
the passenger side only.
“DUAL” button − Changes the mode of the temperature
setting.
The indicator on the “DUAL” button has two modes:
With the indicator on − For individual temperature setting
With the indicator off − For simultaneous temperature
setting

AIR CONDITIONING AND AUDIO
11 0(b) Presetting a station
1. Tune in the desired station.
2. Push one of the station selector buttons (1−6) and hold
it until a beep is heard. This sets the station to the button
and the button number (1−6) appears on the display.
Each button can store one AM station and two FM stations.
To change the preset station to a different one, follow the same
procedure.
The preset station memory is cancelled when the power
source is interrupted by battery disconnection or a blown fuse.(c) Selecting a station
Your Lexus has an electronic tuning radio (ETR). Tune in the
desired station using one of the following methods.
Preset tuning: Push the button (1−6) for the station you want.
The button number (1−6) and station frequency appear on the
display.
Manual tuning: Push the “TUNE SEEK” button for no longer
than 0.5 seconds. Each time you push the button, the radio will
step up or down to another frequency.
Seek tuning: Push the “TUNE SEEK” button and hold it until
you hear a beep. The radio will begin seeking up or down for
a station of the nearest frequency and will stop on reception.
Each time you push the button, the stations will be searched
out one after another.