ESP lexus LS400 1996 Audio System / 1996 LS400: SEAT BELTS, SRS AND CHILD RESTRAINTS

COMFORT ADJUSTMENT
64
INSIDE REAR VIEW MIRROR
Pushing the switch changes the mode between
ªAUTOº and ªDAYº.
The indicator comes on when the ªAUTOº mode is selected.
ªDAYº mode: The mirror surface is normal.
ªAUTOº mode: If the mirror detects light from the
headlights of the vehicle behind you, the mirror surface
darkens slightly to reduce the reflected light.
When the inside rear view mirror surface changes, the
outside rear view mirror surfaces will also become darker.
When the ignition key is inserted and turned on, the inside
rear view mirror always turns on in the ªAUTOº mode.
Adjust it before driving so that the rear view is the best.
When the outside air temperature is low, it may take a little
longer for the mirror to darken in response to the detection
of headlights.
SEAT BELTS
Seat belt precautions
Lexus recommends that the driver and passengers in the
vehicle be properly restrained at all times with the seat belts
provided. Failure to do so could increase the chance of injury
and/or the severity of injury in accidents.
Baby or small child. Use a child restraint system which fits
your vehicle. See ªChild restraintº for details.
Child. If a child is too large for a child restraint system, the
child should sit in the rear seat and must be restrained using
the vehicle's seat belts. According to accident statistics, the
child is safer when properly restrained in the rear seat than
in the front seat. Do not allow the child to stand up or kneel
on either rear or front seats. If the shoulder belt falls across
the child's neck or face, have the child sit slightly closer to the
buckle so that the belt lays across the shoulder.
Pregnant woman. Lexus recommends the use of a seat
belt. Ask your doctor for specific recommendations. The lap
belt should be worn securely and as low as possible over the
hips and not on the waist.
Injured person. Lexus recommends the use of a seat belt.
Depending on the injury, first check with your doctor for
specific recommendations.

COMFORT ADJUSTMENT
70
Front seat belt pretensioners
The driver and front passenger's seat belts are
equipped with a pretensioner which is designed to be
activated in response to a severe frontal impact.
The airbag system and each pretensioner operates
independently because each has its own separate sensor.
A pretensioner sensor is located in each front seat belt
retractor assembly. When the pretensioner sensor detects
the shock of a severe frontal impact, the front seat belt is
quickly drawn back in by the retractor so that the belt snugly
restrains the front seat occupant.
When a seat belt pretensioner is activated, an operating
noise may be heard and a small amount of smoke±like gas
may be released. This gas is harmless and does not indicate
that a fire is occurring.
Once the seat belt pretensioner has been activated, the seat
belt retractor remains locked.CAUTION!
Do not modify, remove or strike the front seat belt
retractor assemblies or surrounding area. Doing any
of these may cause sudden operation of the front
seat belt pretensioners or disable the system, which
could result in personal injury.
Failure to follow these instructions can result in
severe injuries.

COMFORT ADJUSTMENT
71
NOTICE
Do not perform any of the following changes without
consulting your Lexus dealer. Such changes can
interfere with proper operation of the seat belt
pretensioners in some cases.
Repairs on or near the front seat belt retractor
assemblies.
Modification of the suspension system.
Modification of the front end structure.
Attachment of a grille guard (bull bar, kangaroo bar,
etc.), snow plow, winches or any other equipment
to the front end.
In the following case, contact your Lexus dealer as soon as
possible:
If either front seat belt does not retract or cannot be pulled
out due to a malfunction or activation of the pretensioner.
The front seat belt retractor assembly or surrounding area
has been damaged.
SRS AIRBAGS
The SRS (Supplemental Restraint System) airbags are
designed to provide further protection to the driver and
front passenger when added to the primary protection
provided by the seat belts.
In response to a severe frontal impact, the SRS airbags
work together with the seat belts to prevent or reduce
injury by inflating, in order to decrease the likelihood of
the driver's or front passenger's head or chest directly
hitting the steering wheel or dashboard.
The passenger airbag is activated even with no passenger
in the front seat.

COMFORT ADJUSTMENT
72
This indicator comes on when the ignition key is turned
to the ªACCº or ªONº position. It goes off after about 6
seconds. This means the SRS airbags are operating
properly.
The SRS airbag warning light system monitors the airbag
sensor assemblies, inflators, warning lights, interconnecting
wiring and power sources.The SRS airbag system is designed to activate in
response to a severe frontal impact within the shaded
area between the arrows in the illustration.
The SRS airbags will deploy if the severity of the impact is
above the designed threshold level, comparable to an
approximate 20 km/h (14 mph) collision when impacting
straight into a fixed barrier that does not move or deform.
If the severity of the impact is below the above threshold
level, the SRS airbags may not deploy.
However, this threshold velocity will be considerably higher
if the vehicle strikes an object, such as a parked vehicle or
sign pole, which can move or deform on impact, or if it is
involved in an underride collision (e.g. a collision in which the
nose of the vehicle ªunderridesº, or goes under, the bed of
a truck).
It is possible with collision severity at the marginal level of
airbag sensor detection and activation that only one of your
vehicle's two airbags will deploy.