remote control LEXUS LS500 2022 User Guide

81
LS500_QG_U
3Program a device.
 Vehicles with auto anti-glare inside rear view mirror
 Vehicles with Digital Rearview Mirror
 Programming a device other than an entry gate (for U.S.A. owners)
Press and hold the remote control transmitter button until the HomeLink® indicator light
changes from slowly flashing or ange to rapidly flashing green (rolling code) or continuously
lit green (fixed code), then release the button.
 Programming an entry gate (for U.S.A. owners)/Programming a device in the Cana-
dian market
Press and release the remote control transmitte r button at 2 second intervals, repeatedly,
until the HomeLink® indicator light changes from slowly flashing (orange) to rapidly flashing
(green) (rolling code) or continuously lit (green) (fixed code).
4Test the HomeLink® operation by pressing the newly programmed button and observ-
ing the indicator light:
● HomeLink® indicator light illuminates: Programming of a fixed code device has
completed. The garage door or other device should operate when a HomeLink®
button is pressed and released.
● HomeLink® indicator light flashes rapidly: The garage door opener motor or other device is equipped with a rolling code. To complete programming, firmly press and
hold the HomeLink® button for 2 seconds then release it.
● If the garage door or other device does not operate, proceed to “Programming a
rolling code system”.
5Repeat the steps above to program another device for any of the remaining
HomeLink® buttons.

88
LS500_QG_U
Opening and Closing
■Door lock switches (to lock/unlock)
1Locks all the doors
2Unlocks all the doors
■Inside lock buttons (to lock)
Push down the inside lock button to lock the
door.
■Inside door handles (to unlock)
 For the front doors
Pull the handle to unlock and open the door.
When the door is unlocked, the inside lock
button will pop up.
 For the rear doors
Pull the handle to unlo ck the door. Pull the
handle a second time to open the door.
When the door is unlocked, the inside lock
button will pop up.
Door Locks
The vehicle can be locked and unlocked using the entry function, wireless remote control
or door lock switches.
For details about the entry function or wi reless remote control, refer to P.12, 14.
Unlocking and locking the doors from the inside

93
LS500_QG_U
■Trunk opener switch
Press the trunk opener switch.
If the vehicle is equipped with a power trunk
opener and closer, the trunk lid will fully
open.
■Smart access system with push-button start
 P.14
■Wireless remote control
P.12
■Hands Free Power Trunk Lid (if equipped)
1While carrying an electronic key, stand
within the smart access system with
push-button start operation area,
approximately 11.8 to 19.7 in. (30 to 50
cm) from the rear bumper.
Kick sensor
Hands Free Power Trunk Lid operation
detection area
Smart access system with push-button
start operation detection area
Trunk
Opening/closing the trunk
A
B
C