mirror LEXUS LS500 2022 Owners Manual

1
LS500_QG_U
Pictorial Index ............................................................................................................................. 3
Floor Mat Installation
Floor Mat Installation......................................................................................................... ..............11
Entering and Exiting
Keys ........................................................................................................................... ........................... 12
Smart Access System with Push-button Start .................................................................... 14
When Driving
Front Seats .................................................................................................................... ..................... 16
Power Rear Seat ................................................................................................................ ............. 18
Driving Position Memory ........................................................................................................ .... 19
Digital Rearview Mirror ........................................................................................................ ....... 21
Engine (Ignition) Switch ....................................................................................................... ....... 22
Automatic Transmission ......................................................................................................... ....25
Turn Signal Lever .............................................................................................................. ............. 29
Parking Brake.................................................................................................................. ............... 30
Brake Hold ..................................................................................................................... .................. 32
Multi-information Display...................................................................................................... .....33
Head-up Display ................................................................................................................ ............35
Headlight Switch ............................................................................................................... ............. 37
AHB (Automatic High Beam)................................................................................................. 38
Windshield Wipers and Washer.............................................................................................40
Driving Mode Select Switch ..................................................................................................... 42
Contents
The Quick Guide is not intended as a substitute for yourOWNER’S MANUAL. We strongly encourage you to review the OWNER’S MANUAL and supplementary manuals so youwill have a better understandin g of your vehicle’s capabilities and limitations.

6
LS500_QG_U
Position memory buttons ........................................................................................ P.19
Mode change button .................................................................................................P.17
Window lock switch ................................................................................................. P.89
Outside rear view mirror switches*1
Door lock switches ...................................................................................................P.88
Power window switches.......................................................................................... P.89
Rear door sunshade switches*1, 2
*1: Refer to the “OWNER’S MANUAL”.
*2:If equipped
A
B
C
D
E
F

10
LS500_QG_U
■Ceiling
Moon roof switches*1............................................................................................. P.90
Panoramic moon roof switches*1......................................................................... P.91
Personal lights*2
“SOS” button*1......................................................................................................... P.84
Auxiliary box*2
Vanity mirrors*2
Sun visors*2
Door-linked interior light switch*2
Inside rear view mirror*1, 2
Digital Rearview Mirror*1...................................................................................... P.21
Garage door opener buttons................................................................................ P.79
Interior light*2
*1:If equipped
*2:Refer to the “OWNER’S MANUAL”.
A
B
C
D
E
F
G
H
I
J

19
LS500_QG_U
1Turn the engine switch to IGNITION ON mode.
2Check that the shift position is in P.
3Adjust the driver’s seat, steering wheel, outside rear view mirrors and head-up display
(if equipped) to the desired positions.
4While pressing the “SET” button, or
within 3 seconds after the “SET” button
is pressed, press button “1”, “2” or “3”
until the buzzer sounds.
If the selected button has already been
preset, the previously recorded posi-
tion will be overwritten.
When the driver’s seat adjustment
switches are in front passenger mode
( P.17), the position of the driver’s seat
cannot be registered.
To record the position of the front passenger’s seat, adjust the front passenger’s seat to the
desired position and perform step 4 using the buttons on th e front passenger’s side.
1Turn the engine switch to IGNITION ON mode.
2Check that the shift position is in P.
3Press one of the buttons for the driving
position you want to recall until the
buzzer sounds.
When the driver’s seat adjustment
switches are in front passenger mode
( P.17), a driving position cannot be
recalled.
Driving Position Memory
This feature automatically adjusts the positions of the front seats, steering wheel, outside
rear view mirrors and head-up display (if equipped) to make entering and exiting the vehi-
cle easier or to suit your preferences.
Up to 3 different driving positions can be recorded.
Recording a driving position into memory
Recalling a driving position

21
LS500_QG_U
Camera indicator
Indicates that the camera is operating
normally.
Icon display area
Displays icons, adjusting gauge, etc.
Select button
Press to change the setting of the item
you want to adjust.
Menu button
Press to display the icon display area an d select the item you want to adjust.
Lever
Operate to change between digital mirror mode and optical mirror mode.
Operate the lever to change between digital mirror mode and optical mirror mode.
1Digital mirror mode
Displays an image of the area behind
the vehicle.
will illuminate in this mode.
2Optical mirror mode
Turns off the display of the Digital Rear-
view Mirror allows it to be used as an
optical mirror.
Digital Rearview Mirror (if equipped)
The Digital Rearview Mirror is a system that uses the camera on the rear of the vehicle
and displays its image on the disp lay of the Digital Rearview Mirror.
The Digital Rearview Mirror allows the driver to see the rear view despite obstructions,
such as the head restraints, lu ggage or rear sunshade ensuring rear visibility. Also, the rear
seats are not displayed and privacy of the passengers is enhanced.
System components
A
B
C
Changing modes
D
E

41
LS500_QG_U
9* Rear camera washer operation
Pushing the lever operates the rear camera washer and cleans the rear camera and the
camera for the Digital Rearview Mirror.
*: Vehicles with Digital Rearview Mirror

66
LS500_QG_U
Left-hand side temperature control switch
Operate the temperature control switch upwards to increase the temperature and
downwards to decrease the temperature.
Automatic mode switch
Off switch
Fan speed decreases switch
Fan speed increases switch
Windshield defogger switch
Rear window defogger and outside rear view mirror defoggers switch
Outside/recirculated air mode switch
Right-hand side temperature control switch
Operate the temperature control switch upwards to increase the temperature and
downwards to decrease the temperature.
Front Automatic Air Conditioning System
Air outlets and fan speed are automatically adjusted according to the temperature set-
ting.
Control panel
A
B
C
D
E
F
G
H
I

79
LS500_QG_U
The HomeLink® wireless control system in your vehicle has 3 buttons which can be pro-
grammed to operate 3 different devices. Refe r to the programming methods on the follow-
ing pages to determine the method wh ich is appropriate for the device.
 Vehicles with auto anti-glare inside rear view mirror
HomeLink® indicator light
Garage door operation indicators
HomeLink® icon
Illuminates while HomeLink® is oper-
ating.
Buttons
 Vehicles with Digital Rearview Mirror
HomeLink® logo
Appears while HomeLink® is operat-
ing. When the menu button ( P.21) is pressed, the logo disappears even
while the HomeLink® is operating.
Garage door operation indicators
HomeLink® indicator light
Illuminates above each button
selected.
Buttons
■Before programming HomeLink®
● During programming, it is possible that garage doors, gates, or other devices may oper-
ate. For this reason, make su re that people and objects are clear of the garage door or
other devices to prevent inju ry or other potential harm.
● It is recommended that a new battery be placed in the remote control transmitter for
more accurate programming.
● Garage door opener motors manufactured after 1995 may be equipped with rolling
code protection. If this is the case, you may need a stepladder or other sturdy, safe device
to reach the “Learn” or “Smart” button on the garage door opener motor.
Garage Door Opener
The garage door opener can be programmed using the HomeLink® to operate garage
doors, gates, entry doors, door locks, home lighting systems, security systems, and other
devices.
System components
A
B
C
D
A
B
C
D

80
LS500_QG_U
■HomeLink® programming procedureThe programming procedures can also be found at the following URL.
Website: www.homelink.com/lexus
For support, contact customer support at the following.
Help Line: 1-800-355-3515
■Programming HomeLink®
Steps 1 through 3 must be performed within 60 seconds, otherwise the HomeLink® indi-
cator light will stop flashing and progra mming will not be successfully completed.
1Press and release the HomeLink® button you want to program and check that the
HomeLink® indicator light flashes (orange).
2Point the remote control transmitter for the devi ce at the rear view mirror, 1 to 3 in. (25
to 75 mm) from the HomeLink® buttons.
Keep the HomeLink® indicator light in view while programming.
 Vehicles with auto anti-glare inside rear view mirror
 Vehicles with Digital Rearview Mirror

81
LS500_QG_U
3Program a device.
 Vehicles with auto anti-glare inside rear view mirror
 Vehicles with Digital Rearview Mirror
 Programming a device other than an entry gate (for U.S.A. owners)
Press and hold the remote control transmitter button until the HomeLink® indicator light
changes from slowly flashing or ange to rapidly flashing green (rolling code) or continuously
lit green (fixed code), then release the button.
 Programming an entry gate (for U.S.A. owners)/Programming a device in the Cana-
dian market
Press and release the remote control transmitte r button at 2 second intervals, repeatedly,
until the HomeLink® indicator light changes from slowly flashing (orange) to rapidly flashing
(green) (rolling code) or continuously lit (green) (fixed code).
4Test the HomeLink® operation by pressing the newly programmed button and observ-
ing the indicator light:
● HomeLink® indicator light illuminates: Programming of a fixed code device has
completed. The garage door or other device should operate when a HomeLink®
button is pressed and released.
● HomeLink® indicator light flashes rapidly: The garage door opener motor or other device is equipped with a rolling code. To complete programming, firmly press and
hold the HomeLink® button for 2 seconds then release it.
● If the garage door or other device does not operate, proceed to “Programming a
rolling code system”.
5Repeat the steps above to program another device for any of the remaining
HomeLink® buttons.