LEXUS LX470 2007 Owners Manual

183
3
Interior features
3-2. Using the audio system
Audio system type (without navigation system)
■Using cellular phones
Interference may be heard through the audio system's speakers if a cellular phone
is being used inside or close to the ve hicle while the audio system is operating.
Owners of models equipped with a navigation system should refer to the
“Navigation System Owner's Manual”.
CD player with changer, cassette player and AM/FM radio.
Ti t l ePa g e
Using the radioP. 1 8 5
Using the cassette playerP. 1 9 4
Using the CD playerP. 1 9 7
Optimal use of the audio systemP. 2 0 4
Using the steering switchesP. 2 0 6
Rear seat audio systemP. 2 0 9

184
3-2. Using the audio system
NOTICE
■To prevent battery discharge
Do not leave the audio system on longer than necessary with the engine off.
■To avoid damaging the audio system
Take care not to spill drinks or other fluids over the audio system.

185
3-2. Using the audio system
3
Interior features
Using the radio
Press or to choose either an AM or FM band.
Po w e r Vo l u m e
AM·SAT/FM
mode buttons
Seeking the
frequency
Changing the
program types
Seeking any traffic
program station
Present stations Displaying radio
text messages
Scan for receivable
stations
Adjusting the
frequency
(AM, FM mode) or
channel (SAT mode)

186
3-2. Using the audio system
Setting station presets (excluding XM® satellite radio)
Search for desired stations by turning or pressing  or 
on .
Press and hold one of the preset st ations (1 - 6) until you hear a
beep.
Scanning radio stations (excluding XM® satellite radio)
■ Scanning the preset radio stations
Press and hold until you hear a beep.
Preset stations will be played for a few seconds each.
When the desired station is reached, press once again.
■ Scanning all radio stations within range
Press .
“SCAN” appears on the display an d all stations with reception
will be played for a few seconds each.
When the desired station is reached, press once again.
RDS (Radio Data System)
This feature allows your radio to receive station identification information
and program information (classical, ja zz, etc.) from radio stations which
broadcast this information.
■ Receiving RDS broadcasts
Press  or  on the during FM reception.
STEP1
STEP2
STEP1
STEP2
STEP1
STEP2
STEP1

187
3-2. Using the audio system
3
Interior features
The type of program changes each time the button is pressed.
●ROCK
● EASYLIS (Easy listening)
● CLS/JAZZ (Classical music and Jazz)
● R & B (Rhythm and Blues)
● INFORM (Information)
● RELIGION
● MISC (Miscellaneous)
● ALARM (Emergency messages)
If the system receives no RDS stations, “NO PTY” appears on the display. Press , or  or  on .
The radio seeks scans the station by the relevant program type.
■ Displaying radio text messages
Press .
If MSG is shown on the display, a text message will be displayed.
If the text continues past the end of the display, is displayed. Press and
hold until you hear a beep.
STEP2

188
3-2. Using the audio system
■Traffic announcement
Press .
“TRAF SEEK” appears on the display, and the radio will start seeking any
station broadcasting traf fic program information.
If no traffic program station is foun d, “NO TRAF INFO” appears on the dis-
play.
XM® satellite radio (if equipped)
■ Receiving XM
® satellite radio
Press until “SAT” appears on the display.
The display changes as follows each time the button is pressed.
AM  SAT1  SAT2  SAT3
Turn to select a desired channel from all the categories or
 or  on to select a desired channel in the current cat-
egory.
■ Presetting XM
® satellite radio channels
Select the desired channel. Press on e of the preset stations (1 - 6) and
hold until you hear a beep.
■ Changing the channel category
Press  or  on .
STEP1
STEP2

189
3-2. Using the audio system
3
Interior features
■Scanning XM® satellite radio channels
● Scanning channels in the current category
Press .
“SCAN” appears on the display.
When the desired channel is reached, press the button once
again.
● Scanning preset channels
Press until you hear a beep.
“SCAN” appears on the display.
When the desired channel is reached, press the button once
again.
■ Displaying text information
Press .
The display will show up to 10 characters.
The display changes as follows each time the button is pressed.
●CH NAME
● TITLE (SONG/PROGRAM TITLE)
● NAME (ARTIST NAME/FEATURE)
● CH NUMBER
STEP1
STEP2
STEP1
STEP2

190
3-2. Using the audio system
■When the battery is disconnected
All preset stations are erased.
■Reception sensitivity
●Maintaining perfect radio reception at all times is difficult due to the continually
changing position of the antenna, differences in signal strength and surrounding
objects, such as trains, transmitters, etc.
●To maintain clear radio reception, do not attach metallic window tinting or other
metallic objects to the ante nna wire mounted inside the right-hand rear quarter
window. Ask your Lexus dealer for details.
■XM® satellite radio
The optional Lexus genuine satellite radio tuner and antenna allows you to receive
and play XM satellite radio broadcasts. (Subscription is required. Not available in
Hawaii and Alaska.)*
●XM® subscriptions
For detailed information about XM® satellite radio or to subscribe, visit XM®
on the web at www.xmradio.com or call (800) 967-2346.
●Radio ID
You will need the radio ID when activating XM
® service or reporting a prob-
lem. Select “CH000” using the , and the receiver's 8-character ID num-
ber will appear.
●Satellite tuner
The tuner supports only Audio Services (Music and Talk) and the accompany-
ing Text Information of XM
® satellite radio.
*: Terms and services provided by XM
® Radio are subject to change without
notice.

191
3-2. Using the audio system
3
Interior features
■If the satellite radio does not operate normally
If a problem occurs with the XM
® tuner, a message will appear on the display. Refer
to the table below to identify the problem, and take the suggested corrective action.
ANTENNA
The XM® antenna is not connected. Check whether
the XM® antenna cable is attached securely.
There is a short-circuit in the antenna or the surround-
ing antenna cable. See a Lexus certified dealer.
UPDATING
You have not subscribed to XM® satellite radio. The
radio is being updated with the latest encryption code.
Contact XM
® satellite radio for subscription informa-
tion. When a contract is canceled, you can choose
“CH000” and all free-to-air channels.
The premium channel you selected is not authorized.
Wait for about 2 seconds until the radio returns to the
previous channel or “CH001”. If it does not change
automatically, select another channel. If you want to lis-
ten to the premium channel, contact XM
® satellite
radio.
NO SIGNAL
The XM® signal is too weak at the current location.
Wait until your vehicle reaches a location with a stron-
ger signal.
LOADIN GThe unit is acquiring audio or program information.
Wait until the unit has received the information.
OFF AIRThe channel you selected is not broadcasting any pro-
gramming. Select another channel.
-----
There is no song/program title or artist name/feature
associated with the channel at that time. No action
needed.

192
3-2. Using the audio system
Contact the XM® Listener Care Center at (800) 967-2346 during the following
hours*.
Monday - Saturday: 6 a.m. - 2 a.m. Sunday: 8 a.m. - 8 p.m. Central Standard Time
*: Subject to change without notice.
■Certifications for the radio tuner
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generate s, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interf erence to radio or television reception,
which can be determined by turning the eq uipment off and on, the user is encour-
aged to try to correct the interference by trying one or more of the following:
●Reorienting or relocating the receiving antenna.
●Increasing the separation between the equipment and receiver.
●Connecting the equipment into an outlet on a circuit different from that to which
the receiver connected.
●Consulting the dealer or an experienced radio/TV technician for help.
---
The channel you selected is no longer available. Wait
for about 2 seconds until the radio returns to the previ-
ous channel or “CH001. If it does not change auto-
matically, select another channel.