oil LEXUS LX570 2014 Owner's Manual

8084-3. Do-it-yourself maintenance
LX570_OM_OM60L21U_(U) CAUTION■
Replacing light bulbs ●
Turn off the headlights. Do not attempt to replace the bulb immediately after turn-
ing off the headlights.
The bulbs become very hot and may cause burns. ●
Do not touch the glass portion of the li ght bulb with bare hands. When it is
unavoidable to hold the glass portion, use and hold with a clean dry cloth to avoid
getting moisture and oils on the bulb.
Also, if the bulb is scratched or dr opped, it may blow out or crack.●
Fully install light bulbs and any parts used to secure them. Failing to do so may
result in heat damage, fire, or water en tering the headlight unit. This may damage
the headlights or cause condensation to build up on the lens. ●
While the low beam headlights are turned
on, and for a short time after they have
been turned off, metal components at the
rear of the headlight assembly will be
extremely hot.
To prevent burns, do not touch these metal
components until you are certain they have
cooled down.Metal components

5
When trouble arises
8195-1. Essential information
LX570_OM_OM60L21U_(U) If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs
adjustment or repair. Contact your Lexus dealer as soon as possible.
■ Visible symptoms
● Fluid leaks under the vehicle
(Water dripping from the air conditioning after use is normal.)
● Flat-looking tires or uneven tire wear
● Engine coolant temper ature gauge needle continually points
higher than normal
● Engine oil pressure gauge continually points lower than normal.
● Voltmeter continually points higher or lower than normal.
■ Audible symptoms
● Changes in exhaust sound
● Excessive tire squeal when cornering
● Strange noises related to the suspension system
● Pinging or other noises related to the engine
■ Operational symptoms
● Engine missing, stumbling or running rough
● Appreciable loss of power
● Vehicle pulls heavily to one side when braking
● Vehicle pulls heavily to one side when driving on a level road
● Loss of brake effectiveness, sp ongy feeling, pedal almost touches
the floor

5
When trouble arises
8275-2. Steps to take in an emergency
LX570_OM_OM60L21U_(U) ■
SRS warning light
This warning light system monitors the following: ●
The airbag sensor assembly ●
Front impact sensors ●
Side impact sensors (rear) ●
Side impact sensors (front door) ●
Safing sensor (rear) ●
The driver’s seat belt buckle switch ●
The driver’s seat position sensor●
Front passenger’s seat belt buckle switch ●
The airbags ●
The interconnecting wiring and power sources ●
The front passenger occupa nt classification system●
“AIR BAG ON” and “AIR BAG OFF” indicator lights ●
The seatbelt pretensioners ●
The “RSCA OFF” indicator light■
Changing the engine oil
Make sure to reset oil change system ■
When the tire pressure warning light comes on
Check the tire inflation pressure and adjust to the appropriate level. Pushing the tire
pressure warning reset switch does not turn off the tire pressure warning light. ■
The tire pressure warning light may come on due to natural causes
The tire pressure warning light may come on due to natural causes such as natural
air leaks or tire inflation pressure changes caused by temperature. In this case,
adjusting the tire inflation pressure will turn off the warning light (after a few min-
utes).

5
When trouble arises
8375-2. Steps to take in an emergency
LX570_OM_OM60L21U_(U) (Flashes) Indicates that the moon
roof is not fully closed
(with the “ENGINE
START STOP” switch off,
and the driver’s door
open) Close the moon roof.
Indicates that engine oil
level is low
A buzzer also sounds. Check the level of engine
oil, and add if necessary.
This message may
appear if the vehicle is
stopped on a slope.
Move the vehicle to a
level surface and check
to see if the message dis-
appears.
(Flashes) Indicates, if the vehicle
reaches a speed of 3 mph
(5 km/h), that the parking
brake is still engaged. Release the parking
brake.Wa r n i n g m e s s a g e Details Correction procedure

8485-2. Steps to take in an emergency
LX570_OM_OM60L21U_(U) ■
Resetting the tire pressure warning data
After adjusting the tire inflation pressu re, be sure to initialize the data. (  P. 76 4 )
If the message remains on, the system ma y have malfunctioned. Have the vehicle
inspected by your Lexus dealer as soon as possible. ■
Warning message in vehicle-to-vehicle distance control mode of the dynamic
radar cruise control (if equipped)
In the following cases, the warning message may not be displayed even if vehicle-
to-vehicle distance decreases: ●
When your vehicle and the vehicle ahead are traveling at the same speed or the
vehicle ahead is traveling more quickly than your vehicle ●
When the vehicle ahead is traveling at a very low speed ●
Immediately after cruise control speed is set ●
At the instant the accelerator pedal is depressed
NOTICE■
While the engine oil level warning is displayed
Continued engine operation with low engine oil will damage the engine.

5
When trouble arises
8615-2. Steps to take in an emergency
LX570_OM_OM60L21U_(U) CAUTION■
Replacing a flat tire ●
Observe the following precautions.
Failure to do so may result in serious injury:
• Lower the spare tire completely to the ground before removing it from under
the vehicle.
• Do not try to remove the wheel ornament by hand. Take due care in handling
the ornament to avoid unexpected personal injury.
• Do not touch the disc wheels or the area around the brakes immediately after
the vehicle has been driven.
After the vehicle has been driven the disc wheels and the area around the
brakes will be extremely hot. Touching these areas with hands, feet or other
body parts while changing a tire, etc. may result in burns.
• Turn off the vehicle height control.
The vehicle height may change due to th e automatic leveling function and you
may catch part of your body in the vehicle, resulting in an accident.
(  P. 3 1 8 )●
Failure to follow these precautions could cause the wheel nuts to loosen and the
tire to fall off, resulting in death or serious injury.
• Never use oil or grease on the wheel bolts or wheel nuts.
Oil and grease may cause the wheel nuts to be excessively tightened, leading
to bolt or disc wheel damage. In addition, the oil or grease can cause the
wheel nuts to loosen and the wheel may fall off, causing a serious accident.
Remove any oil or grease from the wheel bolts or wheel nuts.
• Have the wheel nuts tightened wi th a torque wrench to 97 ft
• lbf (131 N
• m,
13.4 kgf
• m) as soon as possible after changing wheels.
• When installing a tire, only use whee l nuts that have been specifically
designed for that wheel.
• If there are any cracks or deformations in the bolt screws, nut threads or bolt
holes of the wheel, have the vehicle inspected by your Lexus dealer.
• Do not attach a heavily damaged wheel ornament, as it may fly off the wheel
while the vehicle is moving.

Vehicle specifications
6
879
LX570_OM_OM60L21U_(U) 6-1. Specifications
Maintenance data
(fuel, oil level, etc.) ............. 880
Fuel information ...................... 891
Tire information...................... 895
6-2. Customization
Customizable features ........ 906
6-3. Initialization
Items to initialize ..................... 917

880
LX570_OM_OM60L21U_(U) 6-1. Specifications
Maintenance data (fue l, oil level, etc.)Dimensions and weights
* 1
: Unladen vehicles
* 2
: Vehicles with roof luggage carrier
* 3
: Vehicles without roof luggage carrierOverall length 198.0 in. (5030 mm)
Overall width 77.6 in. (1970 mm)
Overall height
* 1
75.6 in. (1920 mm)
* 2
73.4 in. (1865 mm)
* 3
Wheelbase 112.2 in. (2850 mm)
Tr e a d Front 64.6 in. (1640 mm)
Rear 64.4 in. (1635 mm)
Vehicle capacity weight
(Occupants + luggage) 1285 lb. (580 kg)
TWR
(trailer weight +
cargo weight) With brake 7000 lb. (3175 kg)
Without brake 1000 lb. (454 kg)

8836-1. Specifications
6
Vehicle specifications
LX570_OM_OM60L21U_(U) Lubrication system
* : The engine oil capacity is a reference quantity to be used when changing the
engine oil. Warm up and turn off the engine, wait more than 5 minutes, and
check the oil level on the dipstick.
■ Engine oil selection
“Toyota Genuine Motor Oil” is used in your Lexus vehicle. Use Lexus
approved “Toyota Genuine Motor Oil” or equivalent to sa tisfy the follow-
ing grade and viscosity.
Oil grade: ILSAC GF-5 multigrade engine oil
Recommended viscosity: SAE 0W-20
SAE 0W-20 is the best choice for
good fuel economy and good
starting in cold weather.
If SAE 0W-20 is not available,
SAE 5W-20 oil may be used.
However, it must be replaced with
SAE 0W-20 at the next oil
change.Oil capacity
(Drain and refill  reference
* )
With filter
Without filter 7.9 qt. (7.5 L, 6.6 Imp.qt.)
7. 5 q t . ( 7.1 L , 6 . 2 I m p . q t . )
Outside temperature

8846-1. Specifications
LX570_OM_OM60L21U_(U) Oil viscosity (0W-20 is explained here as an example):
• The 0W in 0W-20 indicates the char acteristic of the oil which allows
cold startability. Oils with a lower value befo re the W allow for easier
starting of the engine in cold weather.
• The 20 in 0W-20 indicates the visc osity characteristic of the oil when
the oil is at high temperature. An oil with a higher viscosity (one with a
higher value) may be better suited if the vehicle is operated at high
speeds, or under extreme load conditions.
How to read oil container label:
The International Lubricant Specification Advisory Committee (ILSAC)
Certification Mark is adde d to some oil containers to help you select the
oil you should use.