light LEXUS NX300h 2015 Owner's Guide

91
Instrument cluster
2
NX300h_U_OM78007U 2. Instrument cluster
Warning lights and
indicators ....................................... 92
Gauges and meters ......................97
Multi-information display ........ 102
Head-up display .......................... 106
Energy monitor/
consumption screen .................. 111

92 2. Instrument cluster
NX300h_U_OM78007UWarning lights and indicators
The units used on the meter and some indicators may differ depending on the
target region.The warning lights and indicators inform the driver of the status of the vehi-
cle’s various systems.
For the purpose of explanation, the following illustration displays all warning
lights and indicators illuminated.

932. Instrument cluster
2
Instrument cluster
NX300h_U_OM78007U Warning lights inform the driver of malfun ctions in any of the vehicle’s systems.
Warning lights * 1
(U.S.A.)
Brake system warning light
(  P. 5 6 5 )
* 1
(Canada)
ABS warning light
(  P. 5 6 6 )
* 1
(Canada)
Brake system warning light
(  P. 5 6 5 )
* 1
Electric power steering
system warning light
(  P. 5 6 6 )
* 2
Charging system warning
light (  P. 5 6 5 )
* 1
Electric power steering
system warning light
(  P. 5 6 6 )
* 2
Low engine oil pressure
warning light (  P. 565) * 1, 3
(if equipped)
PCS warning light
(  P. 5 6 6 )
* 2
High coolant temperature
warning light (  P. 565) * 1
Slip indicator light
(  P. 5 6 6 )
* 1
Brake system warning light
(  P. 5 6 5 )
* 1, 3
Brake hold operated
indicator (  P. 5 6 6 )
* 1
(U.S.A.)
Malfunction indicator lamp
(  P. 5 6 5 ) * 3
(U.S.A.)
Parking brake indicator
(  P. 5 6 6 )
* 1
(Canada)
Malfunction indicator lamp
(  P. 5 6 5 ) * 3
(Canada)
Parking brake indicator
(  P. 5 6 6 )
* 1
SRS warning light
(  P. 5 6 6 ) Low fuel level warning light
(  P. 5 6 7 )
* 1
(U.S.A.) ABS warning light
(  P. 5 6 6 ) Driver’s and front
passenger’s seat belt
reminder light (  P. 5 6 7 )

94 2. Instrument cluster
NX300h_U_OM78007U * 1
: These lights turn on when the power switch is turned to ON mode to indicate that a
system check is being performed. They will turn off after the hybrid system is on, or
after a few seconds. There may be a malfunctio n in a system if the lights do not turn on,
or turn off. Have the vehicle inspected by your Lexus dealer.
* 2
: This light illuminates on the multi-information display.
* 3
: The light flashes to indicate a malfunction.
* 4
: This light illuminates on the center panel.
The indicators inform the driver of the op erating state of the vehicle’s various sys-
tems. * 1
Master warning light
(  P. 5 6 7 )
* 2
Brake Override System/
Drive-Start Control warning
light (  P. 5 6 7 )
* 1
Tire pressure warning light
(  P. 5 6 7 )
Indicators Turn signal indicator
(  P. 212) “READY” indicator
(  P. 2 0 1 )
(U.S.A.)
Headlight indicator
(  P. 2 1 9 ) EV indicator (  P. 7 9 )
(Canada)
Tail light indicator
(  P. 220) * 8
EV drive mode indicator
(  P. 2 0 6 )
Headlight high beam
indicator (  P. 220) * 8
“ECO” indicator
(  P. 303)
(if equipped)
Automatic High Beam
indicator (  P. 223) * 8
“SPORT” indicator
(  P. 303)
Fog light indicator
(  P. 2 2 7 ) * 8
(if equipped)Radar cruise control
indicator (  P. 2 4 0 , 2 5 3 )

952. Instrument cluster
2
Instrument cluster
NX300h_U_OM78007U * 1
: These lights turn on when the power switch is turned to the ON mode to indicate that
a system check is being performed. They will turn off after the hybrid system is on, or
after a few seconds. There may be a malfunctio n in a system if the lights do not turn on,
or turn off. Have the vehicle inspected by your Lexus dealer.
* 2
: The light flashes to indicate that the system is operating.
* 3
: The light comes on when the system is turned off.
* 4
: When the outside temperature is approximately 37  F (3  C) or lower, the indicator
will flash for approximately 10 seconds, then stay on.* 8
Cruise control “SET”
indicator
(  P. 240, 253, 267) (U.S.A.)
Parking brake indicator
(  P. 213, 214)
* 8
Cruise control indicator
(  P. 240, 253, 267) (Canada)
Parking brake indicator
(  P. 213, 214)
* 8
(if equipped)
LDA indicator (  P. 2 7 0 )
* 1
Brake hold standby
indicator (  P. 2 1 6 )
* 8
(if equipped)
Steering control indicator
(  P. 2 7 0 )
* 1
Brake hold operated
indicator (  P. 2 1 6 )
(if equipped)
Intuitive parking assist
indicator (  P. 2 7 9 )
* 4, 8
Low outside temperature
indicator (  P. 9 7 )
* 1, 2
Slip indicator light
(  P. 3 0 6 ) * 5, 6
(if equipped)
BSM outside rear view
mirror indicators (  P. 3 1 6 )
* 1
VSC OFF indicator
(  P. 3 0 7 )
* 7
Security indicator
(  P. 86, 88)
* 1, 3
(if equipped)
PCS warning light
(  P. 311) * 7
“A I R B A G O N / O F F ”
indicator (  P. 5 3 )

96 2. Instrument cluster
NX300h_U_OM78007U * 5
: In order to confirm operation, the BSM outside rear view mirror indicators illuminate
in the following situations:
• When the power switch is turned to ON mode while the BSM main switch is set to
ON.
• When the BSM main switch is set to ON while the power switch is in ON mode.
If the system is functioning correctly, the BSM outside rear view mirror indicators will
turn off after a few seconds.
If the BSM outside rear view mirror indica tors do not illuminate or do not turn off,
there may be a malfunction in the system.
If this occurs, have the vehicle inspected by your Lexus dealer.
* 6
: This light illuminates on the outside rear view mirrors.
* 7
: This light illuminates on the center panel.
* 8
: This light illuminates on the multi-information display.
WA R N I N G ■
If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS airbag warning light not come on
when you start the hybrid system, this could mean that these systems are not available
to help protect you in an a ccident, which could result in death or serious injury. Have
the vehicle inspected by your Lexus dealer immediately if this occurs.

992. Instrument cluster
2
Instrument cluster
NX300h_U_OM78007U Switches between odometer, trip meter
and maintenance required information
displays. When the trip meter is dis-
played, pressing and holding the button
will reset the trip meter.
The brightness of the instrument panel lights can be adjusted.Darker
Brighter ■
The meters and display illuminate when
The power switch is in ON mode. ■
Instrument panel brightness adjustment
The instrument panel brig htness levels when the tail ligh ts are on and off can be adjusted
individually. However, when the surroundings ar e bright (daytime, etc.), turning on the tail
lights will not change the instru ment panel brightness. At th is time, any adjustments made
to the instrument panel bright ness levels will be applied to both settings at once.Changing the display
Instrument panel light control 1
2

1012. Instrument cluster
2
Instrument cluster
NX300h_U_OM78007U ■
Outside temperature display ●
In the following situations, the correct outside temperature may not be displayed, or the
display may take longer than normal to change.
• When stopped, or driving at low speeds (less than 12 mph [20 km/h])
• When the outside temperature has change d suddenly (at the entrance/exit of a
garage, tunnel, etc.) ●
When “--” or “E” is displayed, the system may be malfunctioning.
Take your vehicle to your Lexus dealer. ■
Pop-up display
In some situations, a pop-up display will be temporarily displayed on the multi-informa-
tion display or the odometer/trip meter/ maintenance required information screen.
The pop-up display function can be set on/off. (  P. 6 3 8 )■
Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is characteristic
of liquid crystal displays, and there is no problem continuing to use the display.■
Customization
The meter display can be customized on the multi-information display.
(Customizable features:  P. 6 3 3 )
WA R N I N G ■
The information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal information
display. At extremely low temperatures, th e information display monitor may respond
slowly, and display changes may be delayed.
For example, there is a lag between the driver's shifting and the new gear number
appearing on the display. This lag could cau se the driver to downshift again, causing
rapid and excessive engine braking and po ssibly an accident resulting in personal
death or injury.
NOTICE ■
To prevent damage to the engine and its components ●
When the tachometer is displayed, do not let the indicator needle of the tachometer
enter the red zone, which indicates the maximum engine speed. ●
The engine may be overheating if the engine coolant temperature gauge is in the red
zone (H); or “Engine Coolant Temp High” or “Hybrid System Overheated” is shown
on the multi-information display. In this case, immediately stop the vehicle in a safe
place, and check the engine or hybrid system after it has cooled completely.
(  P. 600)

1132. Instrument cluster
2
Instrument cluster
NX300h_U_OM78007U These images are examples only, and may vary slightly from actual conditions. When the vehicle is
powered by the gaso-
line engine
When the vehicle is
charging the hybrid
battery (traction bat-
tery)
When there is no
energy flow
Hybrid battery (trac-
tion battery) status Low Full Low FullNavigation system screen or
Lexus Display Audio screen Multi-information display

1193-1. Key information
3
Operation of each component
NX300h_U_OM78007U To take out the mechanical key, push
the release button and take the key out. The mechanical key can only be
inserted in one direction, as the key only
has grooves on one side. If the key can-
not be inserted in a lock cylinder, turn it
over and re-attempt to insert it.
After using the mechanical key, store it
in the electronic key. Carry the mechan-
ical key together with the electronic key.
If the electronic key battery is depleted
or the entry function does not operate
properly, you will need the mechanical
key. (  P. 5 9 2 )
■
Panic modeUsing the mechanical key
When is pressed for longer than about
1 second, an alarm will sound intermittently and
the vehicle lights will flash to deter any person
from trying to break into or damage your vehi-
cle.
To stop the alarm, press any button on the elec-
tronic key.