sensor LEXUS RX200T 2017 Owners Manual

5346-1. Basic operation of the Remote Touch screen
RX350/RX200t_EE_OM48F32E
■Selecting the operation screen
When selecting the main display, move the Remote Touch knob to the left.
When selecting the side display, move the Remote Touch knob to the right.
■ Main display
For details about the functions and operation of the main display, refer to the
respective section and “NAVIGATION SYSTEM OWNER’S MANUAL”.
■Side display
Basic screens
To change the screen displayed on the side display, use the screen buttons on
the right side of the display.
Navigation system*
Audio*
Phone*
Vehicle information ( P. 132)
Air conditioning system
( P. 540)
Select to hide the side display. If
the item displayed on the main
display is full screen display com-
patible ( P. 533), it will be dis-
played full screen.
Interruption screens
Each of the following screens is displayed automatically in accordance with
conditions.
• Lexus parking assist-sensor ( P. 372)
•Phone*
•Driving mode ( P. 417)
*: Refer to the “NAVIGATION SYSTEM OWNER’S MANUAL”.
Split-screen display operation
1
2
3
4
5
6

5867-1. Maintenance and care
RX350/RX200t_EE_OM48F32E
WARNING
■When washing the vehicle
Do not apply water to the inside of the engine compartment. Doing so may cause the electrical components, etc. to catch fire.
■When cleaning the windshield (vehicles with rain-sensing windshield wipers)
●When the upper part of the windshield where the raindrop sensor is located is touched by hand
●When a wet rag or similar is held close to the raindrop sensor
●If something bumps against the windshield
●If you directly touch the raindrop sensor body or if something bumps into the raindropsensor
■Precautions regarding the exhaust pipes and rear bumper diffusers
Exhaust gasses cause the exhaust pipes and rear bumper diffusers to become quite hot.
When washing the vehicle, be careful not to touch the pipes and diffusers until they have cooled sufficiently, as touching hot exhaust pipes and rear bumper diffusers cancause burns.
■Precaution regarding the rear bumper with Blind Spot Monitor (if equipped)
If the paint of the rear bumper is chipped or scratched, the system may malfunction. If this occurs, consult any authorized Lexus deal er or repairer, or another duly qualified
and equipped professional.
Set the wiper switch to off.
If the wiper switch is in “AUTO”, the wipers may operate unexpectedly in the following situa-tions, and may result in hands being caught or
other serious injuries and cause damage to the wiper blades.
Off

6688-2. Steps to take in an emergency
RX350/RX200t_EE_OM48F32E
Slip indicator When the warning light is illuminated:
Indicates a malfunction in: •The VSC system;•The TRC system;
• The Trailer Sway Control; or • The hill-start assist control system Have the vehicle inspected by any authorized Lexus dealer or
repairer, or another duly qualified and equipped professional immediately.When the warning light flashes:
Indicates that the VSC, TRC or Trailer Sway Control system is operating
(If equipped)
PCS warning lightWhen the warning light flashes (and a buzzer sounds):
Indicates a malfunction in the PCS (Pre-Crash Safety system)  Have the vehicle inspected by any authorized Lexus dealer or repairer, or another duly qualified and equipped professional
immediately.
When the warning light flashes (and a buzzer does not sound):
Indicates that the PCS (Pre-Crash Safety system) is temporarily unavailable, possibly due to either of the following:• An area around the radar sensor or camera sensor being dirty
or covered with condensation, ice, stickers, etc.  Clear the dirt, condensation, ice, stickers, etc.
( P. 294, 295) • Radar sensor or camera sensor operational conditions (such astemperature etc.) being not met
 Driving is possible in this case. The PCS (Pre-Crash Safety sys- tem) will be enabled if the oper ational conditions (such as tem- perature etc.) are met again.
When the warning light is illuminated: Either the VSC (Vehicle Stability Control) system or PCS (Pre-
Crash Safety system) is disa bled or both are disabled.  To enable the PCS, enable both the VSC system and PCS. ( P. 304, 425)
(Flashes) (If equipped)
ICS OFF indicator
When a buzzer sounds: Indicates a malfunction in the Intelligent Clearance Sonar system Have the vehicle inspected by any authorized Lexus dealer or
repairer, or another duly qualified and equipped professional immediately.When a buzzer does not sound:
Indicates that the system is temporarily unavailable, possibly due to a sensor being dirty or covered with ice, etc. Clear the dirt, etc.
Warning lightWarning light/Details/Actions

6708-2. Steps to take in an emergency
RX350/RX200t_EE_OM48F32E
■Front passenger detection sensor, seat belt reminder and warning buzzer
●If luggage is placed on the front passenger seat, the front passenger detection sensor may cause the warning light to flash and the warning buzzer to sound even if a passen-ger is not sitting in the seat.
●If a cushion is placed on the seat, the sensor may not detect a passenger, and the warn-ing light may not operate properly.
■Electric power steering system warning light (warning buzzer)
When the battery charge becomes insufficien t or the voltage temporarily drops, the electric power steering system warning lig ht may come on and the warning buzzer may sound.
■If the malfunction indicator lamp comes on while driving
The malfunction indicator lamp will come on if the fuel tank becomes completely empty. If the fuel tank is empty, refuel the vehicle immediately. The malfunction indicator lamp
will go off after several trips.
If the malfunction indicator lamp does not go off, contact any authorized Lexus dealer or repairer, or another duly qualified and eq uipped professional as soon as possible.
■When the tire pressure warning light comes on
Inspect the tires to check if a tire is punctured.
If a tire is punctured: P. 679, 693
If none of the tires are punctured: Turn the engine switch off then turn it to IGNITION ON mode. Check if the tire pressurewarning light comes on or blinks.
If the tire pressure warning light comes on
After the temperature of the tires has lowere d sufficiently, check the inflation pressure of each tire and adjust them to the specified level.
If the warning light does not turn off even after several minutes have elapsed, check that the inflation pressure of each tire is at the specified level and perform initialization. ( P. 616)
If the warning light does not turn off severa l minutes after the initialization has been per- formed, have the vehicle inspected by any authorized Lexus dealer or repairer, or another duly qualified and equipped professional immediately.
If the tire pressure warning light blinks for 1 minute then stays on
There may be a malfunction in the tire pressure warning system. Have the vehicle inspected by any authorized Lexus dealer or repairer, or another duly qualified and
equipped professional immediately.
■The tire pressure warning light may come on due to natural causes
The tire pressure warning light may come on due to natural causes such as natural air leaks or tire inflation pressure changes caused by temperature. In this case, adjusting the tire inflation pressure will turn off th e warning light (after a few minutes).
1
2

6918-2. Steps to take in an emergency
8
When trouble arises
RX350/RX200t_EE_OM48F32E
WARNING
■When using the compact spare tire (vehicles with a compact spare tire)
●Remember that the compact spare tire provided is specifically designed for use with your vehicle. Do not use your compact spare tire on another vehicle.
●Do not use more than one compact spare tire simultaneously.
●Replace the compact spare tire with a standard tire as soon as possible.
●Avoid sudden acceleration, abrupt steerin g, sudden braking and shifting operations
that cause sudden engine braking.
■When the compact spare tire is attached (vehicles with a compact spare tire)
The vehicle speed may not be correctly detected, and the following systems may not
operate correctly:
Also, not only can the following system not be utilized fully, but it may even negatively affect the drive-train components:
• AWD system (AWD models)
■Speed limit when using the compact spare tire (vehicles with a compact spare tire)
Do not drive at speeds in excess of 80 km /h (50 mph) when a compact spare tire is installed on the vehicle.
The compact spare tire is not designed for driving at high speeds. Failure to observe this precaution may lead to an accid ent causing death or serious injury.
■After using the tools and jack
Before driving, make sure all the tools and jack are securely in place in their storage location to reduce the possibility of personal injury during a collision or sudden brak- ing.
• ABS & Brake assist
•VSC •TRC• Trailer Sway Control
•EPS • VDIM (if equipped)• Adaptive Variable Suspension System
(if equipped) • Cruise control (if equipped)• Dynamic radar cruise control with full-
speed range (if equipped) • PCS (Pre-Crash Safety system) (ifequipped)
• LKA (Lane-Keeping Assist) (if
equipped) • RSA (Road Sign Assist) (if equipped)• Automatic High Beam (if equipped)
• AHS (Adaptive High-beam System) (if equipped)• Tire pressure warning system
• Lexus parking assist-sensor (if equipped)• Intelligent Clearance Sonar (ICS) (if
equipped) • Lexus parking assist monitor (ifequipped)
• Panoramic view monitor (if equipped) • BSM (Blind Spot Monitor) (ifequipped)
• Navigation system (if equipped)

7429-2. Customization
RX350/RX200t_EE_OM48F32E
■Power back door* (P. 151)
*: If equipped
FunctionDefault settingCustomized setting
Power back door switch opera- tionPress for 1 secondOne short press—O
Automatic closing of the back
door when loweredOnOff—O
Automatic opening of the back door using the back door openerswitchOnOff—O
Power back door opening posi-
tion51 to 5OO
Buzzer volumeLevel 3Level 1—OLevel 2
Power back door/touchless sen- sor*On
Power back door:OnTouchless sensor:
Off—O
Off
Power back door open/close
buzzer
When the back door begins tooperate: On
While the back door is operating:Off
Off
—O
When the backdoor begins tooperate: Off
While the back door is operating:On
On
Sound pattern of the buzzer
when the power back door begins to operateSound pattern A
Sound pattern B
—OSound pattern C
Touchless sensor* sensitivityLevel 1 (standard)Level 1 (standard) to
level 3 (highest)—O
12

7469-2. Customization
RX350/RX200t_EE_OM48F32E
■Turn signal lever (P. 258)
■Automatic light control system (P. 265)
■Lights (P. 265)
FunctionDefault settingCustomized setting
The number of times the turn sig- nal lights flash automaticallywhen the turn signal lever is
moved to the first position during a lane change
3
5
—O7
Off
12
FunctionDefault settingCustomized setting
Light sensor sensitivityStandard-2 to 2OO
Time elapsed before headlights turn off (follow me home system) 30 seconds
60 seconds
—O90 seconds
120 seconds
12
FunctionDefault settingCustomized setting
Welcome lightingOnOff—O
12

7489-2. Customization
RX350/RX200t_EE_OM48F32E
■Lexus parking assist-sensor*1 (P. 371)
*1: If equipped
*2: When Lexus parking assist-sensor is operating.
■BSM (Blind Spot Monitor)* (P. 355)
*: If equipped
FunctionDefault settingCustomized setting
Detection distance of the front center sensorFarNearOO
Detection distance of the rearcenter sensorFarNearOO
Buzzer volume31 to 5OO
Display setting*2All sensors dis-
playedDisplay offOO
12
FunctionDefault settingCustomized setting
Outside rear view mirror indica- tor brightnessBrightDimOO
Alert timing for presence of
approaching vehicle (BSM func- tion only)Intermediate
Early
OOLate
Only when in blind spot
RCTA buzzer volumeLevel 2Level 1O—Level 3
12

749
9
9-2. Customization
Vehicle specifications
RX350/RX200t_EE_OM48F32E
■Driving mode select switch ( P. 417)
*:If equipped
■Automatic air conditioning system (P. 536)
*:If equipped
■Seat heaters*/seat ventilators* (P. 550, 551)
*:If equipped
FunctionDefault settingCustomized setting
Powertrain control in customized mode*NormalPowerO—Eco
Chassis control in customizedmode*NormalSportO—
Air conditioning operation incustomized mode*NormalEcoO—
12
FunctionDefault settingCustomized setting
Switching between outside air
and recirculated air mode linked to “AUTO” switch operationOnOffOO
A/C auto switch operationOnOffOO
Exhaust gas sensor sensitivity*Standard-3 to 3OO
12
FunctionDefault settingCustomized setting
Driver’s seat temperature prefer-ence in automatic modeStandard-2 (cooler) to 2 (warmer)OO
Front passenger’s seat tempera-
ture preference in automatic modeStandard-2 (cooler) to 2 (warmer)OO
12

756What to do if... (Troubleshooting)
RX350/RX200t_EE_OM48F32E
●The seat belt reminder light is flashing
Are the driver and the passengers wearing the seat belts? ( P. 669, 669)
●The parking brake indicator is on
Is the parking brake released? ( P. 259)
Depending on the situation, other types of warning buzzer may also sound.
( P. 666, 673)
●Did anyone inside the vehicle open a door or anything move inside the vehicle
during setting the alarm?
The sensor detects them and the alarm sounds. ( P. 83)
Do one of the following to stop the alarm:
• Unlock the doors using the entry fu nction or wireless remote control. • Start the engine.
●Is the message displayed on the multi-information display?
Check the message on the multi-information display. ( P. 673)
●When a warning light turns on or a warning message is displayed, refer to
P. 666, 673.
A warning buzzer sounds during driving
An alarm is activated and the horn sounds
(vehicles with an alarm)
A warning buzzer sounds when leaving the vehicle
A warning light turns on or a warning message is displayed