sensor LEXUS RX350 2015 Service Manual

6413-7. Other interior features
3
Interior features CAUTION■
While driving the vehicle
Do not adjust the display. Adjust the di splay only when the vehicle is stopped.■
When doing the circling calibration
Secure a wide space, and watch out for people and vehicles in the vicinity. Do not
violate any local traffic rules while performing circling calibration.
NOTICE■
To avoid compass malfunctions
Do not place magnets or any metal objects near the inside rear view mirror.
Doing this may cause the compass sensor to malfunction.■
To ensure normal operation of the compass ●
Do not perform a circling calibration of the compass in a place where the earth's
magnetic field is subject to interference by artificial magnetic fields.●
During calibration, do not operate elec tric systems (moon roof, power windows,
etc.) as they may interfere with the calibration.

6514-1. Maintenance and care
4
Maintenance and care ■
Aluminum wheels ●
Remove any dirt immediately by using a neutral detergent. Do not use hard
brushes or abrasive cleaners. Do not us e strong or harsh chemical cleaners.
Use the same mild detergent and wax as used on the paint.●
Do not use detergent on the wheels when they are hot, for example after driving
for long distance in the hot weather.●
Wash detergent from the wheels immediately after use.■
Bumpers
Do not scrub with abrasive cleaners.
CAUTION■
When cleaning the windshield (vehicles with rain-sensing windshield wipers)
●
When the upper part of the windshield where the raindrop sensor is located is
touched by hand●
When a wet rag or similar is held close to the raindrop sensor●
If something bumps against the windshield●
If you directly touch the ra indrop sensor body or if something bumps into the
raindrop sensor■
Precautions regarding the exhaust pipe
Exhaust gasses cause the exhaus t pipe to become quite hot.
When washing the vehicle, be careful not to touch the pipe until it has cooled suffi-
ciently, as touching a hot exhaust pipe can cause burns. Set the wiper switch to off.
If the wiper switch is in , the wipers
may operate unexpected ly in the following
situations, and may result in hands being
caught or other serious injuries and cause
damage to the wiper blades.OFF

7084-3. Do-it-yourself maintenance
23
ETCS 10 A Multiport fuel injection system/
sequential multiport fuel injection sys-
tem24
RAD NO. 1 10 A Audio system, navigation system25
AM2 7. 5 A Starter system26
ECU-B NO. 2 7. 5 A Air conditioning system, front passen-
ger occupant classification system,
audio system, vehicle stability control
system, power windows27
MAYDAY/TEL 7. 5 A MAYDAY/TEL28
IMMOBI 7. 5 A IMMOBI29
ALT-S 7. 5 A Charging system30
DRL 7. 5 A Daytime running light system31
IGN 10 A Multiport fuel injection system/
sequential multiport fuel injection sys-
tem32
DOME 10 A Vanity mirror lights, luggage compart-
ment lights, interior lights, personal
lights, door courtesy lights, footwell
lights, scuff lights
33
ECU-B NO. 1 10 A Tilt and telescopic steering, multiplex
communication system, meters and
gauges, driving position memory,
power seats, power back door, head-
up display, starter system, outside rear
view mirror, steering sensor, garage
door openerFuse Ampere Circuit

7124-3. Do-it-yourself maintenance
7
ECU-IG1 NO. 1 10 A Multiplex communication system,
steering sensor, shift lock control sys-
tem, tilt and telescopic steering, auto-
matic transmission system, power
back door, pre-collision system, vehi-
cle stability control system, tire pres-
sure warning system8
S/ROOF 30 A Moon roof9
FUEL OPN 7. 5 A Fuel filler door opener10
PSB 30 A Pre-collision seat belt11
TI & TE 30 A Tilt and telescopic steering system12
DR LOCK 10 A13
FR FOG 7. 5 A Front fog lights14
P-S E AT L H 30 A Po w e r s e a t ( l e f t - s i d e )15
4WD 7. 5 A AW D s y s t e m16
INVERTER 20 A Po w e r o u t l e t17
RR FOG 7. 5 A18
D/L ALT B 25 A Multiplex communication system,
power door lock system, power back
door19
EPS 10 A Electric power steering system20
ECU-IG1 NO. 2 10 A Intuitive parking assist, AWD system,
pre-collision seat beltFuse Ampere Circuit

5
When trouble arises
7495-2. Steps to take in an emergency
■
If the malfunction indicator lamp comes on while driving
First check the following: ●
Is the fuel tank empty?
If it is, fill the fuel tank immediately.●
Is the fuel tank cap loose?
If it is, tighten it securely.
The lamp will go off after several driving trips.
If the light does not go off even after several trips, contact your Lexus dealer as soon
as possible.■
SRS warning light
This warning light system monitors the airb ag sensor assembly, front airbag sensors,
side and curtain shield airbag sensors, curtain shield and rear side airbag sensors,
door sensors, driver's seat position sensor, driver's seat belt buckle switch, front
passenger occupant classification system (ECU and sensors), “AIR BAG ON” indi-
cator light, “AIR BAG OFF” in dicator light, front pass enger's seat belt buckle
switch, seat belt pretensioner assemblies, inflators, interconnecting wiring and
power sources. (  P. 1 1 9 )■
Front passenger detection sensor, passen ger seat belt reminder and warning
buzzer ●
If luggage is placed on the front passenger seat, the front passenger detection
sensor may cause the warning light to flash and the warning buzzer to sound
even if a passenger is not sitting in the seat.●
If a cushion is placed on the seat, the sensor may not detect a passenger, and the
warning light may not operate properly.■
Electric power steering system warning light (warning buzzer)
When the battery charge becomes insuffic ient or the voltage temporarily drops,
the electric power steering system warn ing light may come on and the warning
buzzer may sound.
■
When the tire pressure warning light comes on
Check the tire inflation pressure and adjust to the appropriate level. Pushing the tire
pressure warning reset switch will not turn off the tire pressure warning light.

5
When trouble arises
7575-2. Steps to take in an emergency
(Flashes)
(If equipped) Indicates a malfunction in the pre-collision system
(If equipped) Indicates a malfunction in the intuitive parking assist
The malfunctioning assi st-sensor is flashing.
Indicates a malfunction in the cruise control system
or the radar cruise control system (If equipped)
Press the “ON-OFF” button once to deactivate the
system, and then press the button again to reactivate
the system.
(If equipped) Indicates a malfunction in the automatic headlight
leveling systemWa r n i n g m e s s a g e Details

7625-2. Steps to take in an emergency
(If equipped) Indicates that the pre-
collision system is not
currently functional
because the grille or the
sensor is dirty.
This message also
appears when the pre-
collision system is not
functional due to over-
heating. • Check the grille and the
sensor and clean them if
they are dirty.
• In case of overheating,
the system will become
functional once the sys-
tem cools down.
(If equipped) Indicates that intuitive
parking assist is dirty or
covered with ice
A buzzer also sounds.
The site of the malfunc-
tion and the vehicle
image are flashing. Clean the sensor.
(If equipped) Indicates that the radar
cruise control sensor is
dirty or covered with ice
A buzzer also sounds. Clean the sensor.Wa r n i n g m e s s a g e Details Correction procedure

7645-2. Steps to take in an emergency
Indicates that the engine
has overheated
A buzzer also sounds. Stop and check.
(  P. 7 9 9 )
Indicates that remaining
fuel is approximately 2.8
gal. (10.7 L, 2.3 Imp. gal.)
or less Refuel the vehicle.
(Flashes) Indicates that the
“ENGINE START STOP”
switch is turned off or
turned to ACCESSORY
mode and the driver's
door is opened while the
lights are turned on. Turn the lights off.
(If equipped) Indicates that the Blind
Spot Monitor sensors or
the surrounding area on
the bumper is dirty or
covered with ice. Clean the sensor and its
surrounding area on the
bumper.Wa r n i n g m e s s a g e Details Correction procedure

8406-2. Customization
Automatic light control system ( 
P. 211)Function Default
setting Custom-
ized
setting
Time elapsed before
the headlights turn
off 30 sec-
onds Off
O —
O —
O O60 sec-
onds
90 sec-
onds
Light sensor sensi-
tivity Standard -2 to 2 O —
O —
O O
Light reminder
buzzer On Off — — — — —
O
Daytime running
light system (except
for Canada) On Off O —
O —
O O

8426-2. Customization
Seat belt reminder ( 
P. 74 7 )
Automatic air conditioning system ( 
P. 345, 353)Interior light control On Off O —
O —
O O
Exterior light control On Off O —
O —
O O
Shift lever lights On Off — — — — —
O
Function Default
setting Custom-
ized
setting
Vehicle speed linked
seat belt reminder
buzzer On Off — — — — —
O
Function Default
setting Custom-
ized
setting
A/C auto switch
operation Auto Manual O —
O — —
O
Exhaust gas sensor
sensitivity Standard -3 to 3 O —
O — —
OFunction Default
setting Custom-
ized
setting