lock LEXUS RX400H 2008 Owners Manual

362
4-3. Do-it-yourself maintenance
RX400h_U
77RADIO NO.27. 5
Instrument cluster lights, instrument
panel lights, navigation system, audio
system
78MIR HTR10Outside rear view mirror defogger
79PWR30
Power window, multiplex communica-
tion system (power door lock system,
wireless remote control system), out-
side rear view mirror
80P/ S E AT30Po w e r s e a t s
■After a fuse is replaced
●If the lights do not turn on even after the fuse has been replaced, a bulb may need
replacement. (→P. 3 6 5 )
●If the replaced fuse blows again, have the vehicle inspected by your Lexus dealer.
■If there is an overload in the circuits
The fuses are designed to blow before the entire wiring harness is damaged.
CAUTION
■To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failing to do so may cause damage, and possibly a fire or injury.
●Never use a fuse of a higher amperage rating than indicated, or use any other
object in place of a fuse.
●Always use a genuine Lexus fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
This can cause extensive damage or even fire.
●Do not modify fuses or the fuse box.
FuseAmpereCircuit

366
4-3. Do-it-yourself maintenance
RX400h_U
Replacing light bulbs■ Headlight high beam (halogen bulb)
Turn the bulb base counterclock-
wise.
Unplug the connector while
depressing the lock release.
■Rear bulb locations
CLY43AA065
Back-up light
License
plate light
Rear turn
signal light
Rear side
marker light
STEP1
STEP2

367
4-3. Do-it-yourself maintenance
4
Maintenance and care
RX400h_U■
Headlight low beam (halogen bulb)
Turn the cover counterclockwise.
Turn the bulb base counterclock-
wise.
Unplug the connector while
depressing the lock release.
■ Front turn si gnal lights
Turn the bulb base counterclock-
wise.
STEP1
STEP2
STEP3
STEP1

368
4-3. Do-it-yourself maintenance
RX400h_URemove the light bulb.
■ Front side marker lights
Turn the bulb base counterclock-
wise.
Remove the light bulb.
■ Parking lights
Turn the bulb base counterclock-
wise.
STEP2
STEP1
STEP2
STEP1

369
4-3. Do-it-yourself maintenance
4
Maintenance and care
RX400h_URemove the light bulb.
■ Rear side marker lights
Right-hand side only:
Remove the bolts using a Phillips-
head screwdriver and remove the
clips.
Removing clip
Installing clip
Turn the bulb base counterclock-
wise.
STEP2
STEP1
STEP2

370
4-3. Do-it-yourself maintenance
RX400h_URemove the light bulb.
■ Rear turn signal lights
Remove the access hole cover.
Use a flathead screwdriver which is
wrapped with a cloth.
Turn the bulb base counterclock-
wise.
Remove the light bulb.
STEP3
STEP1
STEP2
STEP3

372
4-3. Do-it-yourself maintenance
RX400h_UTurn the bulb base counterclock-
wise.
Remove the light bulb.
■ License plate lights
Open the back door and remove
the luggage compartment light
unit.
Pull out the connector.
STEP5
STEP6
STEP1
STEP2

373
4-3. Do-it-yourself maintenance
4
Maintenance and care
RX400h_URemove the upper trim board.
Turn the bulb base counterclock-
wise.
Remove the light bulb.
■ Bulbs other than the above
If any of the bulbs listed below has burnt out, have your Lexus dealer
replace it.
●Headlight low beams (discharge bulbs)
● Fog lights
● Stop lights
● Tail lights
● High mounted stoplight
STEP3
STEP4
STEP5

375
4-3. Do-it-yourself maintenance
4
Maintenance and care
RX400h_U
CAUTION
■Replacing light bulbs
●Turn off the headlights. Do not attempt to replace the bulb immediately after turn-
ing off the headlights.
The bulbs become very hot and may cause burns.
●Do not touch the glass portion of the light bulb with bare hands. Hold the bulb by
the plastic or metal portion.
If the bulb is scratched or dropped it may blow out or crack.
●Fully install light bulbs and any parts used to secure them.
Failing to do so may result in heat damage, fire, or water entering the headlight
unit. This may damage the headlights or cause condensation to build up on the
lens.
●Do not attempt to take apart or repair the low beam discharge headlight bulbs,
connectors, power supply circuits, or related components.
Doing so could result in electric shock and serious injury or death.
■Discharge headlights
●Contact your Lexus dealer before replacing discharge headlights (including light
bulbs).
●Do not touch the high-intensity discharge headlight’s high voltage socket when
the headlights are turned on.
An extremely high voltage of 20000 V will be discharged and could result in
serious injury or death by electric shock.
■To prevent damage or fire
Make sure bulbs are fully seated and locked.

5
When trouble arises
393
5-2. Steps to take in an emergency
RX400h_U
■Key reminder buzzer
The buzzer indicates that the key has not been removed from the engine switch
(with the engine switch in the ACC or LOCK position and the driver’s door
opened).
■If the malfunction indicator lamp comes on while driving
First check the following:
●Is your vehicle low on gas?
If it is, refuel the vehicle immediately.
●Is the fuel tank cap loose?
If it is, tighten it securely.
The lamp will go off after taking several driving trips.
If the light does not go off even after several trips, contact your Lexus dealer as soon
as possible.
■Front passenger detection sensor and passenger seat belt reminder
●If luggage is placed on the front passenger seat, the front passenger detection
sensor may cause the warning light to flash, even if a passenger is not sitting in the
seat.
●If a cushion is placed on the seat, the sensor may not detect a passenger, and the
warning light may not operate properly.
■Changing the engine oil (U.S.A. only)
Make sure to reset the oil change system. ( →P. 3 2 1 )
■When the tire pressure warning light comes on
Check the tire inflation pressure and adjust to the appropriate level. Pushing the tire
pressure warning reset switch does not turn off the tire pressure warning light.
■The tire pressure warning light may turn on due to natural causes
The tire pressure warning light may turn on due to natural causes such as natural air
leaks or tire inflation pressure changes caused by temperature. In this case, adjust-
ing the tire inflation pressure will turn off the warning light (after a few minutes).