transmission LINCOLN CONTINENTAL 1997 Owners Manual
[x] Cancel search | Manufacturer: LINCOLN, Model Year: 1997, Model line: CONTINENTAL, Model: LINCOLN CONTINENTAL 1997Pages: 321, PDF Size: 2.37 MB
Page 81 of 321
77
The Overhead ConsoleWhen you select a button, the vehicle's cellular
phone will automatically place a data call to the
response center's central computer. Once contact is
made, an electronic data message will be
transmitted. This data message will include:q
Type of alarm (roadside or emergency)
q
Vehicle Identification Number (VIN)
q
Latitude and longitude coordinates
q
Last recorded speed and direction of the vehicle
q
Time tag identifying when last position was
taken
q
Call-back phone number
After the transmission is complete, the call is
forwarded to an operator who will verify the details
of the request and confirm the vehicle's location
using computerized map.
Tow Truck Button (Roadside
Assistance)The tow truck button should be selected if roadside
assistance is required. The feature should be used:q
when your vehicle runs out of gas
q
when your vehicle needs a tow
q
to acquire assistance in any non-emergency
situation
File:05fncfc.ex
Update:Fri Sep 6 14:53:57 1996
Page 85 of 321
81
Once an assistance request is made, it will typically
take less than one minute until contact is made
with an operator. During voice communication the
following messages will alternately toggle on the
display:q
CID XXXXXXXXXX
q
LAT XXXXXXXXXX
q
LON XXXXXXXXXX
q
HDG XX
These messages respectively are the customer
identification number, vehicle latitude, vehicle
longitude and heading. Under special circumstances,
the operator may ask you to read the information
being displayed on the Message Center.
If vehicle messages are being displayed on the
Message Center (low washer fluid, low oil, door
ajar, etc.), they must be cleared in order to view
the LINCOLN RESCU messages. To clear thevehicle messages, press the Message Center RESET
button, which is located to the right of the display.
Continue pressing the button until all vehicle
messages are cleared.
Automatic RedialAs described previously, when an assistance request
is made, the vehicle's cellular phone automatically
dials the Lincoln Security Response Center's central
computer and attempts to send an electronic data
message. Occasionally, it can be difficult for the
computer to recognize the message if the cellular
connection is weak or noisy. If the transmission of
the message is unsuccessful, the data call will be
terminated and the message ªREDIAL IN
PROGRESSº will be displayed on the Message
Center. A second call will automatically be placed
which bypasses the response center's computer and
is forwarded directly to an operator.
File:05fncfc.ex
Update:Fri Sep 6 14:53:57 1996
Page 86 of 321
82Similarly, if the cellular call is disconnected by the
network prior to receipt of the termination tone,
another call to the response center will also
automatically be dialed. The message ªREDIAL IN
PROGRESSº will be displayed on the Message
Center and voice communication with an operator
will be restored.
NOTE:During redial calls, full control of the
cellular phone is returned to you. Pressing either
the ªPWRº or ªENDº button on the cellular
handset will terminate the assistance request and
reset the system.Location Data Retransmit CapabilityDuring an activation, the Lincoln Security Response
Center operator has the capability to initiate a
retransmission of the electronic data message. This
may be necessary to ensure a more precise
determination of vehicle location or to track a
vehicle that is moving. To accomplish the
retransmit, a special tone is sent to the vehicle bythe response center. In this situation you will
temporarily lose voice contact with the operator and
the messages ªSENDING LOCATION DATAº and
ªDATA RECEIVEDº will respectively be displayed
on the Message Center. After the data
retransmission is complete, voice communication
will be restored and the CID, LAT, LON and HDG
message will again alternately toggle on the Message
Center display.
Global Positioning SystemVehicle location is continuously updated via Global
Positioning System (GPS) technology. GPS was
developed by the U.S. Department of Defense for
worldwide navigational and positioning purposes. It
utilizes a constellation of 24 orbiting satellites
located more than 20 thousand kilometers above
the earth. At any given time, several of the 24
satellites should be visible to the vehicle's GPS
receiver. Based on the time for signals emitted by
these satellites to reach the receiver, an on-board
computer will determine the vehicle's location,
File:05fncfc.ex
Update:Fri Sep 6 14:53:57 1996
Page 319 of 321
321
Trailer towing (continued)
trailer lamps............. 188
Transaxle
automatic operation......177, 178
fluid, checking and adding
(automatic).........238, 239
fluid, refill capacities......... 272
lubricant specifications........ 273
Transaxle control switch......... 181
Trunk, using the remote entry system
to open............... 123
Tune-up specifications (VECI)...... 260
Turn signal.............. 64
indicator lights...........14,65
lever...............64,65
U
Used engine oil, disposal.....220, 240
V
Variable interval wipers......... 66
VECI (Vehicle Emission Control Information)
decal................ 260
Vehicle loading
automatic transaxles......... 184
automatic transmissions........ 184
calculating the load.......... 184
manual transaxles.......... 184
manual transmissions......... 184
understanding loading information . . . 183
Vehicle storage............. 274
Ventilating your vehicle
(see Climate control)....... 45,51
Viscosity (see Engine oil)........ 226
Visor (see Sun visor).......... 94
Voltmeter (see Battery voltage gauge) . . . 13
File:fnixc.ex
Update:Tue Sep 17 08:28:54 1996