bulb LINCOLN MARK VIII 1997 Owners Manual
[x] Cancel search | Manufacturer: LINCOLN, Model Year: 1997, Model line: MARK VIII, Model: LINCOLN MARK VIII 1997Pages: 315, PDF Size: 2.18 MB
Page 258 of 315
253
How to Prepare Your Vehicle for
Inspection/Maintenance (I/M) TestingIn some localities it may become a legal
requirement to pass an Inspection/Maintenance
(I/M) test of the On-Board Diagnostic (OBD) II
system. If the vehicle's powertrain system or its
battery has just been serviced, the OBD II system is
reset to a not ready for I/M testing condition. To
prepare for I/M testing, the law specifies that
additional mixed city and highway driving is
required to complete the check of the OBD II
system.
The driving modes required to reach the ready
condition consist of a minimum of 30 minutes of
city and highway driving as described below:q
At least twenty minutes driving in stop and go,
city type traffic with at least four idle periods.
q
At least ten minutes of driving on an
expressway or highway.Before completing the above driving modes, the
engine must be warmed up and at operating
temperature. Once started, the vehicle must not be
turned off during these driving modes.
Lights and Bulb ReplacementIt is a good idea to check the operation of the
following lights frequently:q
headlamps
q
high-mount brakelamp
q
tail lamps
q
brakelamps
q
hazard flasher
q
turn signals
q
license plate lamps
File:11fnmc8.ex
Update:Thu Jun 20 14:28:32 1996
Page 259 of 315
254
Thealignmen tof you rheadlamp sshoul dbe
WARNING
Handl ea haloge nheadlam pbulb
Page 260 of 315
255
Headlamp bulb removalRemoving the high beam headlamp bulb1. Make sure that the headlamp switch is in the
OFF position.
2. Lift the hood, remove the sight shield above
the headlamp and find the bulb in the
headlamp socket.3. Remove the high beam dust cap by rotating
counterclockwise 1/4 turn. Pull back to
exposes wiring and connector.
4. Remove the bulb connector by pulling rearward
to free it from the lamp assembly.
5. Remove the electrical connector by pulling off
the bulb base.
Installing the high beam headlamp bulb1. Push the electrical connector into the rear of
the plastic base of the bulb until it snaps,
locking it into position.
2. Insert the glass envelope of the bulb into the
lamp assembly socket while aligning the locking
tabs.
3. Rotate the bulb 1/4 turn to lock.
File:11fnmc8.ex
Update:Thu Jun 20 14:28:32 1996
Page 264 of 315
259
Bulb specifications
File:11fnmc8.ex
Update:Thu Jun 20 14:28:32 1996
Page 298 of 315
297
Brakes
adjustment............. 171
anti-lock.............. 171
anti-lock brake system (ABS)
warning light........... 11
applying the brakes.......... 171
brake warning light.......... 10
fluid, checking and adding....... 225
fluid, refill capacities......225, 264
fluid, specifications.......... 265
front disc.............. 171
if brakes do not grip well....... 171
master cylinder........... 225
new brake linings........... 5
noise................ 171
parking brake and auto-release..... 172
servicing.............. 225
trailer............... 187
when storing your vehicle....... 268Break-in period.............. 5
Brights (high beams).......... 14
Bulbs, replacing............ 253
halogen............... 254
headlamps.............. 254
C
Canada, customer assistance....... 276
Canada, warranty information....... 3
Canadian Motor Vehicle Arbitration Plan
(CAMVAP).............. 277
Capacities for refilling fluids....... 264
Carbon monoxide in exhaust....... 169
Car seats for children
(see Child safety seats)........ 151
Catalytic converter........... 250
File:fnix8.ex
Update:Thu Jun 27 10:02:38 1996
Page 305 of 315
304Headlamps (continued)
flashing............... 86
high beam............. 86
replacing bulbs........... 253
turning on and off.......... 79
warning chime............ 15
Head restraints............. 131
Heated seats.............. 135
Heating
electronic automatic temperature
control system........... 69
High beams
indicator light............ 14
operation.............. 86
Hitch................. 186
Hood................. 219
latch location............ 219
lubrication specifications....... 265
release lever............. 219
working under the hood....... 217
Horn................. 90
I
Idle, relearning..........212, 217
Ignition
chime............... 84
positions of the ignition........ 83
removing the key.......... 84
Indicator lights and chimes (see Lights) . . . 7
Infant seats (see Safety seats)....150, 151
Instrument panel............. 7
Interval wipers............. 86
J
Jack.................. 202
operation.............. 203
positioning............. 205
storage............... 202
Jump-starting your vehicle
attaching cables........... 211
disconnecting cables......... 212
File:fnix8.ex
Update:Thu Jun 27 10:02:38 1996
Page 306 of 315
305
K
Keyless entry system
locking and unlocking doors...... 119
programming entry code....... 120
Keys
key in ignition chime......... 84
positions of the ignition........ 83
removing from the ignition...... 84
stuck in lock position......... 83
L
Lamps
autolamp delay system........ 80
checking.............. 253
daytime running light system..... 78
dome lamps............. 96
flashing the lamps.......... 86
hazard flashers............ 89
headlamps............. 79
high beams............. 86
interior lamps............ 78map lamps............. 96
replacing bulbs............ 253
trailer............... 187
Lane change indicator (see Turn signal) . . 85
Lap belts............... 143
Lights, warning and indicator
airbag............... 45
anti-lock brakes (ABS)......... 11
brake................ 10
charging system........... 13
check engine............ 45
engine oil pressure.......... 11
hazard warning light......... 89
high beam............. 14
overdrive off............. 46
safety belt.............. 44
turn signal indicator......... 14
File:fnix8.ex
Update:Thu Jun 27 10:02:38 1996
Page 311 of 315
310Sliding moon roof (see Moon roof).... 97
Snow tires and chains.......... 242
Spare tire............... 201
changing the tire........... 201
finding the spare........... 202
removing the spare tire........ 203
storing the flat tire.......... 205
temporary spare........... 201
Spark plugs, specifications........ 263
Specification chart, lubricants...... 265
Speed control
turning off............. 94
when towing a trailer......... 187
Speedometer.............. 16
Starting your vehicle
preparing to start your vehicle..... 165
starting after a collision........ 189
starting your vehicle if the battery
is disabled............. 209Steering, power............ 177
Steering wheel
horn................ 90
locking............... 83
Storage compartments, center console . . . 115
Storing your vehicle........... 266
Sunroof (moon roof)........... 97
Sun visor............... 101
Supplemental air bag readiness light.... 45
Supplemental Restraint System (SRS) . . . 145
T
Tachometer.............. 17
Tail lamps
bulb replacement........... 253
cleaning............... 261
Temperature control (see Climate control) . 69
Tether anchor installation
(see Child restraints)......... 162
Tilt/Telescope steering column...... 91
File:fnix8.ex
Update:Thu Jun 27 10:02:38 1996