checking and replacing fuses LINCOLN MARK VIII 1997 Owners Manual
[x] Cancel search | Manufacturer: LINCOLN, Model Year: 1997, Model line: MARK VIII, Model: LINCOLN MARK VIII 1997Pages: 315, PDF Size: 2.18 MB
Page 183 of 315

178To move the shifter out of P (Park), the ignition
key must be turned to the ON position. This
vehicle is also equipped with the brake shift
interlock safety feature which prevents shifting the
transmission out of the P (Park) position without
the brake pedal being depressed if the key is in the
ON position.
To operate:
1. Start the engine.
2. Depress and hold the brake pedal.
3. Move the gearshift lever out of P (Park).
Your vehicle is equipped with a Brake Shift
Interlock safety feature. This feature prevents the
gearshift from being moved from the P (Park)
position until the brake pedal is depressed. Thisfeature is active when the ignition is in the ON
position. If the gearshift lever CANNOT be moved
from P (Park) with the brake pedal depressed:
1. Turn the engine off and remove the ignition
key.
2. Apply parking brake.
3. Reinsert the ignition key and turn clockwise to
the first position.
4. Depress the brake pedal, move the gearshift
lever to N (Neutral) and start the engine.
If you need to shift out of P (Park) by using the
alternate procedure described above, it is possible
that a fuse has blown and that your brakelamps
may also not be functional. Please refer to the
Servicing Your Mark VIIIchapter for instructions on
checking and replacing fuses.
File:09fngf8.ex
Update:Wed Jun 19 10:45:23 1996
Page 196 of 315

191
5. Check under the vehicle again for leaking fuel.
If you see or smell fuel, do not start your
vehicle again.If you do not see or smell fuel,
you can try to start your vehicle again.FusesFuses (miniature and high current) protect your
vehicle's wiring system from overloading. If
electrical parts in your vehicle are not working, the
system may have been overloaded and blown a
fuse. Before you replace or repair any electrical
parts, check the appropriate fuses (miniature and
high current).
The following charts tell you which fuses or circuit
breakers protect the wiring for each electrical part
of your vehicle. If a fuse blows or a circuit breaker
opens a circuit,allthe parts of your vehicle that
use that circuit will not work.
Once you have determined which fuses to check,
follow the procedures underChecking and
replacing fusesin this chapter.The instrument panel fuse panel location
File:10fner8.ex
Update:Thu Jun 20 14:27:22 1996
Page 204 of 315

199
Checking and Replacing FusesIf you need to check a fuse, follow these steps:
1. Find the fuse panel on driver's side end of the
instrument panel by opening the door. Unsnap
cover from the instrument panel.
2. Find the fuse you want to check (fuses are
numbered on the fuse panel) and remove it
with the fuse pulling tool that is provided.
3. Check the fuse to see if it is blown. Look
through the clear side of the fuse to see if the
metal wire inside is separated. If it is, the fuse
should be replaced.
File:10fner8.ex
Update:Thu Jun 20 14:27:22 1996
Page 303 of 315

302Ford of Canada Customer
Assistance Centre........... 276
Foreign registration........... 278
French owner guides, how to obtain.... 3
Fuel................. 243
calculating fuel economy..... 25,248
capacity............... 264
choosing the right fuel........ 245
comparisons with EPA fuel
economy estimates......... 249
filling your vehicle with fuel...... 243
filter, specifications.......... 263
fuel filler door release lever...... 243
fuel gauge.............. 19
octane rating............ 246
quality............... 246
running out of fuel.......... 248safety information relating to
automotive fuels.......... 247
storing your vehicle......... 267
treating emergencies......... 247
Fuel cap................ 243
removing.............. 243
replacing.............. 243
Fuel filler door............. 243
remote release............ 243
Fuel filter, specifications......... 263
Fuel gauge............... 19
Fuel pump shut-off switch
engine does not start......... 189
starting after a collision........ 189
Fuse panels.............. 191
engine compartment......... 195
instrument panel........... 199
Fuses
charts............... 191
checking and replacing........ 199
File:fnix8.ex
Update:Thu Jun 27 10:02:38 1996