power steering LINCOLN MKX 2012 My Lincoln Touch Manual

When on the shortcut screen, select ‘Edit/Add shortcuts’ and the system
will walk you through the process of setting and saving your shortcuts.
Note:If you have a Focus, you will have a star icon
next to your
first and second favorite shortcuts on-screen. These stars correspond to
the stars on your steering wheel controls. If you have saved shortcuts in
these spots, you can simply press the desired
icon on your steering
wheel to access the saved feature (rather than having to take your hands
off the wheel to access).
Using the touch sensitive controls on your system
Your vehicle’s centerstack is equipped with touch sensitive switches for
your infotainment and climate control systems. To activate or deactivate
a feature, you need only touch the graphic with your finger.
For optimum performance of these touch sensitive controls,
please note the following:
•The touch sensors are sensitive to light touch. You do not need to
apply forceful pressure on these controls to use them.
•Use your bare finger to touch the center of a touch control graphic.
Touching off-center of the graphic may cause nearby control to
activate/deactivate.
•Ensure that your hands are clean, dry and free of moisture.
•Since the touch control sensor operates based on the touch of a
finger, you may have trouble using them if you are wearing gloves.
•Metal and other conductive material should be kept away from the
surface of the touch controls as this may cause electronic interference
(i.e. control activation).
Depending on your vehicle and option package, you may also have
some of the following controls on your bezel:
•
(Power):Touch to turn the media (or climate features) on/off.
•VOL:Use to increase/decrease the volume.
•VOL and
slider bars:Lightly slide your finger over the rear
slider area to increase/decrease the volume or fan levels.
•
/and TUNE +/-: Use as you normally would in media
modes.
•
(Eject):Touch to eject a CD from the system.
Introduction
6
2012 HMI-1 Gen 2(fd1)
Supplement, 1st Printing
USA(fus)

IN THE EVENT OF A CRASH
Not all crashes deploy an airbag or activate the fuel pump shut-off
(which would activate 911 Assist™); however, if 911 Assist™ is
triggered, SYNCwill try to contact emergency services. If a connected
phone is damaged or loses connection to SYNC, SYNCwill search for,
and try to connect to, any available previously paired phone and try to
make the call to 911.
Before making the call:
•SYNCprovides a short window of time (about 10 seconds) to
cancel the call. Failure to cancel the call will result in SYNC
attempting to dial 911.
•SYNCwill say the following, or a similar message: “SYNCwill
attempt to call 911, to cancel the call, press Cancel on your screen
or press and hold the phone button on your steering wheel.”
If the call is not cancelled and a successful call is made, a prerecorded
message will be played for the 911 operator, then the occupant(s) in the
vehicle will be able to talk with the operator. Be prepared to provide
your name, phone number and location immediately, because not all 911
systems are capable of receiving this information electronically.
911 Assist™ may not work if:
•Your cell phone or 911 Assist™ hardware was damaged in a crash.
•The vehicle’s battery or SYNC system has no power.
•The phone(s) paired and connected to the system was thrown
from the vehicle.
•Note:Every phone operates differently. While SYNC911 Assist™
works with most cell phones, some may have trouble using this
feature.
WARNING:Always place your phone in a secure location in the
vehicle so it doesn’t becoming a projectile or get damaged in a
collision. Failure to do so may cause serious injury to someone or
damage the phone which could prevent 911 Assist™ from working
properly.
Information features
53
2012 HMI-1 Gen 2(fd1)
Supplement, 1st Printing
USA(fus)