audio LINCOLN MKZ HYBRID 2015 Quick Reference Guide

45
1 Left Vehicle Info Display Use the steering wheel controls to navigate to
various screens and see how your driving style
directly impacts your fuel economy.

The Display Mode provides hybrid-specific
information through the following screens:
° Vehicle Range ° Inform ° Enlighten
° Engage ° Empower ° MyView
- MyView lets you choose what information
you wish to display. Select Change
MyView in the Options menu to scroll
through the content and make
your selections.

Trip 1 & 2 Modes also offer specific
information in addition to overall mileage
calculations, such as EV Distance.

Fuel Economy Mode provides ways you can
monitor your energy use:
° Fuel History ° Coach
- Coach allows you to see how efficient
your recent acceleration, braking and
cruising behavior was and learn to
improve upon it.
- The Brake Coach appears after the
vehicle has come to a stop, and coaches
you to brake in a manner that maximizes
the amount of energy returned through
the regenerative braking system. The
displayed percentage indicates your
braking efficiency.
2 Power Tilt/Telescoping Steering Column* The 4-way control adjusts the steering wheel to
your desired position.

3 Right Vehicle Info Display Use the steering wheel controls to navigate
to information about Entertainment, Phone,
Navigation*, efficiency leaves and flowers.
Better efficiency equals more leaves, and when
long-term driving efficiency improves, you’ll
see flowers! Refer to the MyLincoln Touch
TM
chapter in your Owner’s Manual for
more information.
4 Steering Wheel Audio Controls*
5 Push Button Start Allows you to start your vehicle by pressing
the ENGINE START STOP button while fully
pressing down on the brake pedal. Press the
button again to switch off the engine.

Note: Your intelligent access transmitter must
be inside the vehicle for the vehicle to start.
6 Push Button Shift Transmission Your vehicle is equipped with an electronic
transmission. The shift buttons are on the
instrument panel, next to the MyLincoln
Touch system.
Putting your vehicle in gear:
A. Fully press down the brake pedal.
B. Press and release one of the PRNDL
buttons to select your gear.
C. The gear shift button you select then lights
and the instrument cluster shows the
selected gear.
D. Release the brake pedal and your
transmission remains in the selected gear.
Note: When entering an automatic car
wash, always put your vehicle into
Stay in Neutral mode:
A. Press the neutral (N) button on the shifter
assembly once. The information display
reads “Press N to enter Stay in
Neutral mode” .
B. Press N again. The message “Stay in
Neutral mode engaged” appears in the
information display and the neutral (N)
control flashes continuously to confirm
your selection.
To exit Stay in Neutral mode, press
another gear.
4
*if equipped
Instrument Panel
2015 MKZ HYBRID