jump cable LINCOLN NAVIGATOR 2009 Owners Manual

LINCOLN NAVIGATOR 2009 Owners Manual NAVIGATOR 2009 LINCOLN LINCOLN https://www.carmanualsonline.info/img/15/7010/w960_7010-0.png LINCOLN NAVIGATOR 2009 Owners Manual

Page 306 of 375

LINCOLN NAVIGATOR 2009  Owners Manual 1.Use only a 12–volt supply to start your vehicle.
2. Do not disconnect the battery of the disabled vehicle as this could
damage the vehicle’s electrical system.
3. Park the booster vehicle close

Page 308 of 375

LINCOLN NAVIGATOR 2009  Owners Manual 4. Make the final connection of the negative (-) cable to the jump
starting stud located in the engine compartment, near the washer fluid
bottle.Do notuse fuel lines, engine rocker covers or the intak

Page 309 of 375

LINCOLN NAVIGATOR 2009  Owners Manual Removing the jumper cables
Remove the jumper cables in the reverse order that they were
connected.
1. Remove the jumper cable from the jump starting stud.
Note:In the illustrations,lightning boltsare

Page 310 of 375

LINCOLN NAVIGATOR 2009  Owners Manual 2. Remove the jumper cable on the negative (-) connection of the
booster vehicle’s battery.
3. Remove the jumper cable from the positive (+) terminal of the booster
vehicle’s battery.
+–+–
+�

Page 311 of 375

LINCOLN NAVIGATOR 2009  Owners Manual 4. Remove the jumper cable from the positive (+) terminal of the
disabled vehicle’s battery.
After the disabled vehicle has been started and the jumper cables
removed, allow it to idle for several m