remote control LINCOLN ZEPHYR 2006 User Guide

The turn signal lamps will flash once when all doors, the hood and the
trunk are closed indicating the vehicle is locked and entering the 20
second countdown.
Disarming the system
You can disarm the system by any of the following actions:
• Unlock the doors by using the remote entry transmitter portion of
your Integrated Keyhead Transmitter.
• Unlock the doors by using your keyless entry pad.
• Unlock the driver’s door with a key. Turn the key full rearward
(toward the rear of the vehicle) to ensure the alarm disarms.
• Turn ignition to the 3 (ON) position with a valid SecuriLock  key.
• Press the panic control on the remote entry transmitter portion of
your IKT. This will only shut off the horn and turn lamps when the
alarm is sounding. The alarm system will still be armed.
Pressing the power door UNLOCK control within the 20 second
prearmed mode will return the vehicle to a disarmed state.
Triggering the anti-theft system
The armed system will be triggered if:
• Any door, the hood or the trunk is opened without using the door key,
keypad or the remote entry transmitter portion of your IKT.
• The ignition is turned to the 3 (ON) position with an invalid
SecuriLock  key.
2006 Zephyr (378)
Owners Guide (post-2002-fmt)
USA (fus)Locks and Security
94

Memory seat and mirrors
This system allows automatic
positioning of the driver seat and
outside rearview mirrors, to two
programmable positions.
The memory seat control is located
on the driver door.
• To program position one, move
the driver seat and exterior
mirrors to the desired positions
using the associated controls.
Press the SET control. The SET control light will briefly illuminate.
While the light is illuminated, press control 1.
• To program position two, repeat the previous procedure using control 2.
A position can only be recalled when the transmission gearshift is in Park
(automatic transmission). A memory seat position may be programmed
at any time.
The memory seat positions are also recalled when you press your remote
entry transmitter UNLOCK control and the transmitter is programmed to
a memory seat position or when you enter a valid customer code 1 or 2
on the keypad.
To program the memory seat to remote entry transmitter, refer to
Remote entry system in the Locks and security chapter. .
Note: The seat will not travel to its final position if the key is not
in the ignition and the easy entry feature is enabled.
Using the power lumbar support
The power lumbar control is located on the outboard side of the seat.
Press one side of the control to
adjust firmness.
Press the other side of the control
to adjust softness.
Heated seats and climate controlled seats (if equipped) operation
The controls for the climate controlled seats are located on the dual
electronic automatic temperature control (DEATC) system. Refer to
Climate controls for more information.
2006 Zephyr (378)
Owners Guide (post-2002-fmt)
USA (fus)Seating and Safety Restraints
98

Safety defects, reporting ..........202
Safety restraints ........102, 106–110
BeltMinder
............................111
extension assembly ................115
for adults .........................107–109
for children .....................131–132
Occupant Classification
Sensor ......................................104
safety belt maintenance .........115
warning light and chime ........110
Safety seats for children ..........135
Safety Compliance
Certification Label ....................246
Seat belts
(see Safety restraints) .............102
Seats ............................................95
child safety seats ....................135
climate control ..........................99
front seats .................................95
heated ........................................22
memory seat .......................80, 98
SecuriLock passive anti-theft
system ..........................................89
Servicing your vehicle ..............210
Side air curtain .........................128
Spark plugs, specifications ......240,
244
Specification chart,
lubricants ...........................242, 244
Speed control ..............................53
Starting your vehicle ........164–166
jump starting ..........................190
Steering
speed sensitive .......................171
Steering wheel
controls ......................................56
tilting .........................................47 T
Tilt steering wheel ......................47
Tires ...........................143–144, 184
alignment ................................150
care ..........................................147
changing ..........................184, 186
checking the pressure ............147
inflating ...................................145
label .........................................156
replacing ..................................149
rotating ....................................151
safety practices .......................149
sidewall information ...............152
snow tires and chains ............157
spare tire .................................184
terminology .............................144
tire grades ...............................144
treadwear ........................143, 148
Towing .......................................162
recreational towing .................162
trailer towing ..........................162
wrecker ....................................195
Traction control ........................170
Transaxle
fluid, checking and adding
(automatic) .............................237
Transmission .............................171
brake-shift interlock (BSI) ....171
fluid, refill capacities ..............241
lubricant specifications ..242, 244
Trunk ...........................................76
remote release ....................71, 80
Turn signal ..................................33
V
Vehicle dimensions ...................244
Vehicle Identification Number
(VIN) ..........................................247
2006 Zephyr (378)
Owners Guide (post-2002-fmt)
USA (fus) Index
255