lumbar support LOTUS ELISE 2005 Owners Manual

SEATING & SAFETY RESTRAINTS
SeatsOn delivery of the car, first remove the protective plastic
seat covers, if this has not already been done, and dispose of
safely. To adjust the fore/aft position of the driver’s seat, raise the
lift bar beneath the front of the seat, and slide to the position
required. Ensure that the catch is fully engaged after adjustment
by attempting to slide the seat without touching the lift bar. Note
that the passenger seat position is fixed and cannot be adjusted, and that the backrest angle of both seats is fixed, and cannot be reclined.
WARNING:
• Sit as far back from the steering wheel as is comfortable, whilst ensuring that full control can be maintained. Sit
-
ting too close to an airbag can result in serious injury or death if the airbag inflates.
• Ensure that your chest is at least 10 inches (250mm) from
the steering wheel.
• Do not attempt to adjust the seat position whilst driving as this could adversely affect your control of the car.
• Ensure that no persons or objects will be trapped when adjusting the seat.
Lumbar Support (if fitted): On seats equipped with adjustable
lumbar support, an inflator ‘bulb’ (A) and air release button (B)
ohs64a
SEAT ADJUSTMENTS
Seating & Safety Restraints
17

oh_croft_InD.indd 1720/05/2004 07:58:43ProCarManuals.com

are located at the inboard rear of the seat. To increase lumbar
support, squeeze the bulb repeatedly until sufficient support is obtained. To decrease support, press the small black button at
the base of the inflator bulb.
Seat Belts Seat belts provide important safety and comfort for both
driver and passenger and have proven to be the single most
effective safety device in reducing the risk of death or injury in
a crash. The seat belts should be worn at all times, no matter how short the journey. This is required by law in most states
and in all Canadian provinces. As a reminder, the seat belt tell
tale in the instrument cluster will flash until the driver's seat
belt is fastened, accompanied for the first eight seconds by an
audible chime.
Inertia Reel Seat Belts The standard fitment inertia reel seat belts allow the wearer
freedom of movement under normal driving conditions. The belt reel will lock automatically whenever the car is subjected to brak
-
ing, acceleration, or cornering forces, or on impact in a collision. Reel locking will also occur on steep hills or slopes, or if the
car is tilted. In the event of a severe frontal impact sufficient to
trigger the airbag system, a pre-tensioning device incorporated into each seat belt assembly will operate to tighten the belt for
increased occupant protection.
ohs44
SEAT BELT POSITIONING
Seating & Safety Restraints
18

oh_croft_InD.indd 1820/05/2004 07:58:43ProCarManuals.com