roof MAZDA 6 2002 Suplement User Guide

WARNING AND INDEICATOR SYSTEM, THEFT-DETERRENT SYSTEM
T–11
T
SYSTEM WIRING DIAGRAMA6E811801069203
.
End Of Sie
OUTLINEA6E812050000201•An intruder sensor has been adopted on the rear part of the roof. (WGN)
•The construction and operation of the theft-deterrent system is the same as that of the current Mazda6 (GG)
model.
End Of Sie
INTRUDER SENSORA6E812050000202Outline
•WGN models are equipped with intruder sensors in two places in the vehicle, due to the necessity of movement
detection in the all around wider vehicle interior. The intruder sensors are located in the roof at the front (with
sliding sunroof), or the center (without sliding sunroof), and the cargo space.
•The structure and operation of the rear intruder sensor is the same as that of the current front and center
intruder sensors.
IG1
B+
1
345
2
6
97
8
2H 2V
1C 2F 2D 2M 2X 2W
A6E81181004
1 Instrument cluster
2Microcomputer
3 Glow indicator light
4 Sedimentor warning light
5 4WD indicator light6 PCM, ABS (ABS/TCS) HU/CM or DSC HU/CM
7 Fuel gauge sender sub-unit (4WD)
8 Fuel gauge sender unit
9 Sedimentor switch
THEFT-DETERRENT SYSTEM

T–12
THEFT-DETERRENT SYSTEM
Structural View
.
System Wiring Diagram
.
End Of Sie
3
1
2
A6E81201103
1 Front intruder sensor (with sliding sunroof)
2 Center intruder sensor (without sliding sunroof)3 Rear intruder sensor (WGN)
B+ IG1
F
PA
B
C
1
2
CB
A
B O
C
3
L
A6E81201101
1 Theft-deterrent control module
2 Rear intruder sensor (WGN)3 Front intruder sensor (with sliding sunroof)
Center intruder sensor (without sliding sunroof)

LOCATION INDEX
T–17
T
End Of SieWARNING AND INDICATOR SYSTEMA6E810001067201
.
End Of SieTHEFT-DETERRENT SYSTEMA6E810050000201
.
End Of Sie
2
1
A6E81181112
1 Fuel gauge sender sub-unit
(See T–27 FUEL GAUGE SENDER UNIT
REMOVAL/INSTALLATION)
(See T–28 FUEL GAUGE SENDER UNIT
INSPECTION)2 Fuel gauge sender unit
(See T–27 FUEL GAUGE SENDER UNIT
REMOVAL/INSTALLATION)
(See T–28 FUEL GAUGE SENDER UNIT
INSPECTION)
3
12
A6E81201102
1 Front intruder sensor (with sliding sunroof)
2 Center intruder sensor (without sliding sunroof)3 Rear intruder sensor (WGN)

THEFT-DETERRENT SYSTEM
T–29
T
INTRUDER SENSOR REMOVAL/INSTALLATIONA6E812000172201Front Intruder Sensor (With Sliding Sunroof)
•There are no changes from the current front intruder sensor removal/installation procedure.
Center Intruder Sensor (Without Sliding Sunroof)
•There are no changes from the current center intruder sensor removal/installation procedure.
Rear Intruder Sensor (WGN)
1. Disconnect the negative battery cable.
2. Remove the headliner.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
End Of Sie
THEFT-DETERRENT SYSTEM
1 Connector
2Screw
3 Rear intruder sensor
1
2
3
A6E81201105