trunk MAZDA 6 2002 Suplement User Guide

SEAT
S–29
S
REAR SEAT REMOVAL/INSTALLATIONA6E7752572002014WD (WGN)
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
.
Remote wire removal note
1. Turn over the trunk floor mat.
2. Remove the case.
3. Remove the remote wire.
End Of Sie
SEAT
3
2
1
1
A: 36.3—53.9 N·m
{3.71—5.49 kgf·m, 26.8—39.7 ft·lbf}
B: 38.3—78.4 N·m
{3.91—7.99 kgf·m, 28.3—57.8 ft·lbf}
A
A
B
B
A6E77521102
1 Remote wire
(See S–29 Remote wire removal note)2 Rear seat cushion
3 Rear seat back
CASE
REMOTE WIRE
A6E7752W014

T–26
WIPER AND WASHER
13. Remove rear washer hose No.3 from clip C.
14. Remove rear washer hose No.3 and joint pipe D.
15. Remove the headliner. (See S–26 HEADLINER
REMOVAL/INSTALLATION)
16. Remove the tape from rear washer hose No.4.
17. Install in the reverse order of removal.
End Of SieINTERMITTENT REAR WIPER RELAY REMOVAL/INSTALLATIONA6E8116668102011. Disconnect the negative battery cable.
2. Remove the trunk side trim. (See S–21 TRUNK SIDE TRIM REMOVAL/INSTALLATION)
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
End Of Sie
JOINT
PIPE D
REAR WASHER
HOSE NO.3CLIP C
a
A6E81161150
a
REAR WASHER
HOSE NO.4 TAPE
TAPE
A6E81161151
1Bolt
2 Intermittent rear wiper relay
3 Connector
1
23
A6J81161015