seat adjustment MAZDA CX90 2024 User Guide

The amount of seat movement and
the seat and the steering wheel
movement on/off can be changed.
Refer to Settings section in the
Mazda Connect Owner's Manual or
consult an Authorized Mazda Dealer.
In the following cases, the Entry/Exit
Assist is canceled.
A switch is operated due to the
position adjustment of the driver's
seat, steering wheel, or outer
mirrors.
The key lock button or unlock
button is operated.
Editing and Deleting the
Programming Content
Switch the vehicle power ON.
Select “Settings” from the Mazda
Connect home screen.
Select “Driver Personalization System”.
Operate according to the Mazda
Connect screen.
Setting the System to Inoperable
This can be set by operating Mazda
Connect.
Refer to Mazda Connect Owner's
Manual or consult an Authorized
Mazda Dealer.
Equipment to Make Cabin More Comfortable
Driver Personalization System
6-33
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Replace the tire when this happens.
1. New tread
2. Worn tread
3. Tread wear indicator

You should replace the tire before the
band crosses the entire tread.
NOTE
Tires degrade over time, even when
they are not being used on the road. It
is recommended that tires generally be
replaced when they are 6 years or
older. Heat caused by hot climates or
frequent high loading conditions can
accelerate the aging process. You
should replace the spare tire when you
replace the other road tires due to the
aging of the spare tire. The period in
which the tire was manufactured (both
week and year) is indicated by a 4-digit
number.
Refer to Tire Labeling on page 10-30.
Replacing Light Bulbs
All the light bulbs are the LED type.
The LED bulb cannot be replaced as a
single unit because it is an integrated
unit.
The LED bulb has to be replaced with
the unit. If a replacement is necessary,
consult an Authorized Mazda Dealer.
Adjusting the Headlight Aim
If the headlight cannot be adjusted
using procedure below, consult an
Authorized Mazda Dealer.
1. Make sure the vehicle has a fulltank of gasoline and the area
around the headlight is not
deformed.
2. Park the vehicle on level ground.
3. Sit in the driver's seat.
4. Bounce the vehicle several times.
5. Using a Phillips-head screw-driver, turn bolt A in either direction.
Remember the turning direction
and the number of turns.
6. Turn bolt B the same number of turns and in the same direction as
step 5.

1. Adjustment bolt A
2. Adjustment bolt B
Inspection and Servicing/Cleaning
Vehicle Exterior Inspection
9-30
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04