seat adjustment MAZDA CX90 2024 Owners Manual

How to Use the FrontSeats
Driver's Seat
Manual seat
1. Seat Slide
2. Height Adjustment
3. Seat Recline
Powe r s eat
1. Seat Slide
2. Height Adjustment
3. Height Adjustment for Front Edgeof Seat Bottom
4. Seat Recline
5. Lumbar Support Adjustment
Equipment to Protect Occupants/Pedestrians
Front Seats
3-30
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Passenger's seat
Manual seat
1. Seat Recline
2. Height Adjustment*
3. Seat Slide
Po we r s eat
1. Seat Slide
2. Height Adjustment*
3. Height Adjustment for Front Edgeof Seat Bottom*
4. Seat Recline
Equipment to Protect Occupants/Pedestrians
Front Seats
*Some models.3-31
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Driving Position Memory*
The desired driving position can be
called up after programming the
position.
Driver’s seat position (Seat slide,
height adjustment, front edge of seat
bottom, seat recline)
Active driving display (Display
position, brightness level, display
information)
Outside mirror angleSteering Wheel (Power type) (Up
and down adjustment, forward and
backward adjustment)
Warnings and Cautionsfor Using the Driving Pos i t i on Me m or y
CAUTION
Do not place hand, fingers, or feet
around the bottom of the
seat or around the bottom of the
steering wheel while the seat memory
function is operating. The
seat or steering wheel moves
automatically while the seat memory
function is operating and hand, fingers,
or feet could get pinched and injured.
Equipment to Protect Occupants/Pedestrians
Front Seats
3-32*Some models.
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the DrivingPo s i t i on M e m o r y
A driving position can be programmed
to the position memory switch and the
key.
Programming
1. Switch the vehicle power ON.
2. Adjust the following driving positions to the desired positions.
Driver's seatActive driving displayOutside mirrorsSteering wheel (Power type)
3. Continue pressing the SET switch until a sound is activated.
4. Do the following operation within 5seconds after the sound is activated
to program the driving position.
Programming to a position
memory button
Press the button you want to
program, either 1 or 2 button.
Programming to the transmitter
Press the unlock button on the
transmitter.
A sound is activated when the
operation is completed correctly.
Adjusting to the Programmed Driving
Po s i t io n
Operation Using the Position Memory
Switch
Press either switch 1 or 2 that you
programmed to activate the seat
adjustment to your position.
A sound is activated when the
adjustment to the programmed driving
position is completed.
Operation Using the Key
1. Unlock the driver's door using one of the following methods.
Touch the sensing area of the
door release touch sensor.
Press the key unlock button.
2. If the driver's door is opened within a certain period of time after
unlocking, adjustment of the next
driving position starts.
Driver's seatActive driving displayOutside mirrorsSteering wheel (Power type)
A sound is activated when the
adjustment to the programmed
driving position is completed.
Equipment to Protect Occupants/Pedestrians
Front Seats
3-33
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Deleting a Programmed Position
Erasing the Position Stored in the
Position Memory Switch
Program a new driving position.
Deleting a Position Programmed to
the Key
1. Switch the vehicle power OFF.
2. Continue pressing the SET switchuntil a sound is activated.
3. Press the key lock button within 5 seconds after the sound is
activated.
NOTE
If the angle of the outer mirror is
adjusted close to the limits of its
range of motion, the angle of the
outer mirrors may not be
programmed correctly.
When the adjustment to the
programmed driving position has
been completed, a sound is not
activated.
Under the following conditions, the
driving position adjustment is
canceled.
The seat adjustment switch/SET
switch/steering wheel (power
type)/outer mirrors/active driving
display for the driver's seat is
operated to adjust the position.
The key lock button or unlock
button is operated.
The vehicle moves.The selector lever is shifted to a
position other than P.
Equipment to Protect Occupants/Pedestrians
Front Seats
3-34
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the Second-row Seat (6:4 Split
Adjustable-type Bench Seat Type)
Seat Operation
Seat Slide (Forward-back adjustment)
Seat Recline
Third-row Seat Access (Lever/Switch*)
Third-row Seat Access
Occupants can get into and out of the third-row seats easily by sliding the
second-row seats forward.
Operating the Lever
1. Lower the head restraint to the lowest position.
2. Pull up the lever next to the head restraint.
Equipment to Protect Occupants/Pedestrians
Second-row Seat
*Some models.3-37
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the Second-row Seat (Captain Seat Type)
Seat Operation
Seat Slide (Forward-back adjustment)
Seat Recline
Third-row Seat Access (Lever)
Third-row Seat Access
Occupants can get into and out of the third-row seats easily by sliding the
second-row seats forward.
1. Lower the head restraint to the lowest position.
2. Pull up the lever next to the head restraint.
Equipment to Protect Occupants/Pedestrians
Second-row Seat
3-42
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Raising the Second-row Seatbacks
1. Press the seatback rearward and lock it in place.
Armrest
CAUTION
Be careful not to apply excessive force to the armrest such as by sitting on it.
Otherwise, it could be deformed or damaged.
Adjusting the angle
The angle of the armrest can be adjusted according to the angle of the seatback.
To adjust the angle, lower the armrest to the lowest position, pull it up to the
desired position, and then lock it. To adjust the angle again, store the armrest once
and then lower the armrest to the lowest position again.
After adjustment, make sure that the armrest is securely locked by lightly pressing it
down.
Equipment to Protect Occupants/Pedestrians
Second-row Seat
3-45
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the Driver
Personalization System
NOTE
In the following cases, the driver may
not be registered or recognized
correctly.
You are wearing sunglasses, a
mask, or other accessories.
There is an obstruction between
your face and the camera.
Looking forward or at the Mazda
Connect screen will facilitate driver
recognition.
If the vehicle power is switched ON
during recognition, the driver will be
recognized as a guest. If the vehicle
power is switched ON without
opening/closing the door even once,
the information of the previously
recognized driver is taken over.
If the recognition is difficult,
reprogram the data. Two types of
faces can be programmed, such as
when wearing glasses or contact
lenses.
If people with similar faces are
programmed, they may be
recognized incorrectly.
Refer to Driver Monitoring Camera
on page 5-139
Programming
1. Switch the vehicle power ON.
2. Select “Settings” from the Mazda Connect home screen.
3. Select “Driver Personalization System”.
4. Select “Add New Driver”. Operate according to the Mazda
Connect screen.
NOTE
When the door is closed and “Add
New Driver” is displayed on the
Mazda Connect home screen,
follow the instructions on the
screen.
5. (Vehicles with Ideal Driving
Position Assist)
Program the driver’s height
according to the Mazda Connect
screen.
The following items are
automatically adjusted.
Driver's seat position (Angle,
forward and back positions,
entire height, front end height)
Active driving display (Display
height)
Outer mirror angleSteering wheel position (forward
and back positions, height)
NOTE
Under the following conditions,
the Ideal Driving Position Assist is
canceled.
The switch is operated due to
the position adjustment of the
driver's seat, the steering
wheel, the outer mirrors, or the
active driving display.
The key lock button or unlock
button is operated.
The vehicle moves.
The selector lever is shifted to a
position other than P.
6. Follow the Mazda Connect screen to complete the programming.
Equipment to Make Cabin More Comfortable
Driver Personalization System
6-31
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

System Operation
When Entering the Vehicle
Sit in the driver' seat and close the
door.
Matching of the driver’s information
with the programmed information
begins.
The recognition result is displayed on
the screen.
If a confirmation message is displayed
on the Mazda Connect screen, follow
the message to complete the
operation.
The various driver’s settings that have
been programmed are automatically
restored.
NOTE
If the outer mirror angles are
adjusted close to the limits of their
range of motion, the outer mirror
angles may not be restored correctly.
When the adjustment to the stored
driving position has been completed,
a sound is not activated.
Under the following conditions, the
driving position adjustment is
canceled automatically.
The switch is operated due to the
position adjustment of the driver's
seat, the steering wheel, the outer
mirrors, or the active driving
display.
The key lock button or unlock
button is operated.
The vehicle moves.The selector lever is shifted to a
position other than P.
When Exiting the Vehicle
Unfasten the seat belt and switch the
vehicle power OFF.
The climate control setting status and
the personalization features are stored
at the time the vehicle power is
switched OFF.
(Vehicles with Entry/Exit Assist)
The seat and the steering wheel move
when all of the following conditions
are met.
The vehicle is in a programmed
driving position or in a position
where the vehicle was driven for a
certain period of time after adjusting
the driving position.
The vehicle power is switched OFF.The driver’s seat belt is unfastened.
NOTE
The climate control setting status and
the personalization features are also
stored when the drivers are switched
or when another programmed driver
is selected.
The climate control system operates
at the current setting without
restoring the stored values if any of
the following conditions occurs.
The windshield defrosting was
operating.
The ambient temperature is
significantly
different from the
previous time of entering the
vehicle.
A certain number of days have
passed since the previous time of
entering the vehicle.
If the driver's seat belt is unfastened
about 40 seconds after the vehicle
power is switched OFF, the Entry/
Exit Assist may not operate.
The Entry/Exit Assist may not operate
depending on the position of the
seat and the steering wheel.
Equipment to Make Cabin More Comfortable
Driver Personalization System
6-32
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04