warning MAZDA CX90 2024 Owners Manual

Power Liftgate WarningSound
*
A sound is activated 3 times when
the power liftgate is operated and an
object is stuck in the liftgate.
Make sure that there is nothing
stuck.
If the vehicle is driven while the
liftgate is open, a sound is activated
for a while.
Drive the vehicle with the liftgate
closed.
Brake System WarningSound
A warning sound is activated if a
problem with the brake system occurs
and the brakes may not work as
intended. Decelerate the vehicle while
checking the safety of the surrounding
area, and park the vehicle in a safe
place. After stopping the vehicle,
contact an Authorized Mazda Dealer.
What to Do in Case of Emergency
Warning Sound is Activated
*Some models.8-59
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Brake Override WarningSound
A warning sound is activated when the
accelerator pedal and brake pedal are
depressed at the same time while
driving. Only depress the brake pedal.
Electric Parking Brake
(EPB) Warning Sound
The warning sound is activated under
the following conditions:
The vehicle is driven with the parking
brake applied.
The Electric Parking Brake (EPB)
switch is pulled while the vehicle is
driven.
You attempt to start driving the
vehicle while the conditions for
releasing the Electric Parking Brake
(EPB) automatically have not been
met.
Check the condition of the parking
brake.
What to Do in Case of Emergency
Warning Sound is Activated
8-60
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Ve h i c l e Pro b l e m Wa r n i n gSound
If any of the following problems occur,
a warning sound is activated.
Automatic transmission problemIncrease in automatic transmission
internal temperature
Hybrid system problemBrake system problemElectric Parking Brake (EPB) problemEngine oil pressure decreaseEngine coolant temperature increaseEngine system problemShift control system problemCharging system problemApproaching vehicle audible system
problem
Check the information regarding the
warning indication on the center
display or the instrument cluster.
Shift Position Warning Sound
A warning sound is activated when the
selector lever position and the shift
position of the vehicle do not match.
Check the selector lever position.
What to Do in Case of Emergency
Warning Sound is Activated
8-61
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Selector Lever Not in P
Reminder Warning Sound
A warning sound is activated if the
following operations are performed
while the selector lever is in a position
other than P.
The vehicle power is switched OFF
while the hybrid system is operating.
The driver’s seat belt is unfastened
and the driver’s door is opened.
Check the selector lever position.
Reverse Position Warning Sound
The warning sound is activated when
the vehicle power is switched ON and
the selector lever is in the R position.
If the selector lever is shifted to a
position other than R, the warning
sound stops.
What to Do in Case of Emergency
Warning Sound is Activated
8-62
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Door-Ajar WarningSound
A warning sound is activated if the
vehicle is driven with any door or
liftgate ajar. Drive the vehicle after
closing the doors and liftgate.
Battery Saving ModeWarning Sound
A warning sound is activated when the
vehicle goes into Battery Saving Mode.
To charge the lead-acid battery, start
the hybrid system and operate it for 5
minutes or longer.
What to Do in Case of Emergency
Warning Sound is Activated
8-63
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

What to do when thevehicle is stuck
WARNING
Do not spin the wheels at more than
56 km/h (35 mph), and do not allow
anyone to stand behind a wheel when
pushing the vehicle:
When the vehicle is stuck, spinning the
wheels at high speed is dangerous. The
spinning tire could overheat and
explode. This could cause serious
injuries.
CAUTION
Too much rocking may cause EV
Transaxle failure, and tire damage.
If you must rock the vehicle to free it
from snow, sand or mud, depress the
accelerator slightly and slowly move
the selector lever from D to R position.
What to Do in Case of Emergency
If the Vehicle Becomes Stuck
8-64
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

9Inspection and Servicing/Cleaning
Inspection and Servicing............ 9-2Inspection and Servicing.........9-2
Scheduled Maintenance............ 9-4 Scheduled Maintenance......... 9-4
Daily Inspection........................9-7 Daily Inspection.....................9-7
Warnings and Cautions for Daily
Inspection............................. 9-8
Engine Compartment
Inspection................................ 9-9 Checking the Inspection
Locations and Inspection
Items.................................... 9-9
Inspecting Engine Oil........... 9-13
Inspecting the Coolant......... 9-14
Inspecting the Brake Fluid..... 9-16
Replenishing Windshield Washer
Fluid................................... 9-17
Inspecting Lead-acid
Battery................................ 9-18
Replacing the Fuses.............. 9-21
Inspecting Body
Lubrication.......................... 9-22
Vehicle Exterior Inspection....... 9-23 Checking the Inspection
Locations and Inspection
Items.................................. 9-23
Replacing Windshield Wiper
Blade Rubbers..................... 9-23
Inspecting the Tires.............. 9-27Rotating the Tires................. 9-28
Replacing a Tire or a
Wheel................................. 9-29
Replacing Light Bulbs........... 9-30
Vehicle Interior Inspection....... 9-31 Checking the Inspection
Locations and Inspection
Items.................................. 9-31
Air Conditioner
Maintenance....................... 9-32
Key Inspection........................ 9-33 Warnings and Cautions about Key
Battery Replacement............ 9-33
Replacing the Key Battery..... 9-33
Exterior Maintenance.............. 9-35 Exterior Maintenance........... 9-35
Wheel Maintenance.............9-36
Interior Maintenance............... 9-37 Interior Maintenance........... 9-37
Instrument Panel Top (Soft pad)
Maintenance....................... 9-37
Upholstery and Synthetic Leather
Maintenance....................... 9-38
Leather Upholstery
Maintenance....................... 9-38
Maintenance of the Dust-proof
Sheet of the Active Driving
Display................................9-39
Seat Belt Maintenance......... 9-40
9-1
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Warnings and Cautionsfor Daily Inspection
WARNING
Do not perform maintenance work if
you lack sufficient knowledge and
experience or the proper tools and
equipment to do the work. Have
maintenance work done by a
qualified technician.
Performing maintenance work on a
vehicle is dangerous if not done
properly. You can be seriously injured
while performing some maintenance
procedures.
If you must run the hybrid system
while working under the hood, make
certain that you remove all jewelry
(especially rings, bracelets, watches,
and necklaces) and all neckties,
scarves, and similar loose clothing
before getting near the cooling fan
which may turn on unexpectedly.
Working under the hood with the
hybrid system operating is dangerous.
It becomes even more dangerous
when you wear jewelry, loose clothing
or have long hair or a long beard.
Either can become entangled in
moving parts and result in injury.
Pull over to a safe location, then
switch the vehicle power off and
make sure the fan is not running
before attempting to work near the
cooling fan.
Working near the cooling fan when it is
running is dangerous. The fan could
continue running indefinitely even if
the engine has stopped and the engine
compartment temperature is high. You
could be hit by the fan and seriously
injured.
Do not leave items in the motor
compartment.
After you have finished checking or
doing servicing in the engine
compartment, do not forget and leave
items such as tools or rags in the motor
compartment. Tools or other items left
in the engine compartment could
cause the hybrid system damage or a
fire leading to an unexpected accident.
CAUTION
When using a chassis roller, turn the
following systems off to prevent them
from mis-operating while the vehicle is
running on the chassis roller.
 Mazda Radar Cruise Control
(MRCC)
 Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function)
 Cruising & Traffic Support (CTS)
 Smart Brake Support (SBS)
Inspection and Servicing/Cleaning
Daily Inspection
9-8
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

comprised of U.S. and Japanese
automobile manufacturers.
Inspecting the Coolant
WARNING
Do not use a match or live flame in
the engine compartment. DO NOT
ADD COOLANT WHEN THE ENGINE
IS HOT.
A hot engine is dangerous. If the
engine has been running, parts of the
engine compartment can become very
hot. You could be burned. Carefully
inspect the engine coolant in the
coolant reservoir, but do not open it.
Pull over to a safe location, then
switch the vehicle power off and
make sure the fan is not running
before attempting to work near the
cooling fan.
Working near the cooling fan when it is
running is dangerous. The fan could
continue running indefinitely even if
the engine has stopped and the engine
compartment temperature is high. You
could be hit by the fan and seriously
injured.
Do not remove either
cooling system cap when the engine
and radiator are hot.
When the engine and radiator are hot,
scalding coolant and steam may shoot
out under pressure and cause serious
injury.
NOTE
Changing the coolant should be done
by an Authorized Mazda Dealer.
Inspection and Servicing/Cleaning
Engine Compartment Inspection
9-14
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Inspecting the Brake Fluid
WARNING
If the brake fluid level is low, have the
brakes inspected.
A low brake fluid level is dangerous. A
low level could indicate brake lining
wear or a brake system leak which
could cause the brakes to fail and lead
to an accident.
Inspect the fluid level in the reservoir
regularly. It should be kept between
the MAX and MIN lines.
The level normally drops with
accumulated distance, a condition
associated with wear of brake linings. If
it is excessively low, have the brake
system inspected by an Authorized
Mazda Dealer.

Before inspecting the brake fluid,
remove the hole cover.
Removing the Hole Cover.
1.
2.
3.

Installing the Hole Cover.
1. Insert the hole cover into the cowlgrille.
Make sure that the hole cover holds
the cowl grille and the knobs are in
the correct position.
1. The hole cover
2. The cowl grille
2.

Inspection and Servicing/Cleaning
Engine Compartment Inspection
9-16
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04