EPS MAZDA CX90 2024 Owners Manual
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2024, Model line: CX90, Model: MAZDA CX90 2024Pages: 687, PDF Size: 15.46 MB
Page 57 of 687

Any accessories which might
decrease the total seated weight on
the front passenger seat are attached
to the front passenger seat.
The front passenger front and side air
bags and knee air bags, and the seat
belt pretensioner system will
deactivate if the front passenger air
bag deactivation indicator light
illuminates.
 
Do not increase the total seated
weight on the front passenger seat.
When an infant or small child sits on
the front passenger seat, increasing the
total seated weight on the front
passenger seat is dangerous. The front
passenger seat weight sensors will
detect the increased total seated
weight, which could result in the
unexpected deployment of the front
passenger front and side air bags and
knee air bags, and seat belt
pretensioner system in an accident and
may cause serious injury. Increasing the
total seated weight on the front
passenger seat could result in the front
passenger front and side air bags and
knee air bags, and seat belt
pretensioner system deployment in an
accident under the following
conditions, for example.
 Luggage or other items are placed on
the seat with the child in the
child-restraint system.
 A rear passenger or luggage push or
pull down on the front passenger
seatback.
 A rear passenger steps on the front
passenger seat rails with their feet.
 Luggage or other items are placed on
the seatback or hung on the head
restraint.Heavy items are placed in the
seatback map pocket.
 The seat is washed.
 Liquids are spilled on the seat.
 The front passenger seat is moved
backward, pushing into luggage or
other items placed behind it.
 The front passenger seatback
contacts the rear seat.
 Luggage or other items are placed
between the front passenger seat
and driver seat.
 Any accessories which might increase
the total seated weight on the front
passenger seat are attached to the
front passenger seat.
CAUTION
To assure proper deployment of the
front air bag and to prevent damage
to the sensors in the front seat
bottoms.
 Do not place sharp objects on the
front seat bottoms or leave heavy
luggage on them.
 Do not spill any liquids on the
front seats or under the front seats.
 To allow the sensors to function
properly, always perform the
following.
 Adjust the front seats as far back as
possible and always sit upright
against the seatbacks with seat
belts worn properly.
 If you place your child on the front
passenger seat, secure the
child-restraint system properly and
slide the front passenger seat as far
back as possible (page 3-30).
Equipment to Protect Occupants/Pedestrians
SRS Air Bags
3-18
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04 
Page 145 of 687

Immobilizer System
The immobilizer system allows the
hybrid system to start only with a key
the system recognizes.
NOTE
The keys carry a unique electronic
code. For this reason, and to assure
your safety, obtaining a replacement
key requires security validation, this
will add some delays in supplying a
replacement key. They are only
available through an Authorized
Mazda Dealer.
Always keep a spare key in case one
is lost. If a key is lost, consult an
Authorized Mazda Dealeras soon as
possible.
If you lose a key, an Authorized
Mazda Dealer will reset the
electronic codes of your remaining
keys and immobilizer system. Bring
all the remaining keys to an
Authorized Mazda Dealerto reset.
Warnings and Cautions
for Using the Immobilizer System
CAUTION
Radio equipment like this is
governed by laws in the United
States.
Changes or modifications not
expressly approved by the party
responsible for compliance could
void the user's authority to operate
the equipment.
 To avoid damage to the key, do not:
 Drop the key.
 Get the key wet.
 Expose the key to any kind of
magnetic field.
 Expose the key to high
temperatures on places such as the
dashboard, under direct sunlight.
 If the hybrid system does not start
with the correct key, and the security
indicator light keeps illuminating or
flashing , the system may have a
malfunction. Consult an Authorized
Mazda Dealer.
Opening/closing
Security System
4-38
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04 
Page 440 of 687

How to Use the Audio Remote Control Switch
The audio remote control switch is on the left side of the steering wheel. You can
operate basic audio functions, pick up/hang up the phone, or activate voice
control using the switch.
The shape of the switches may differ depending on the specifications.
 
Volume adjustment button 
/
Press the (+) or (-) button to adjust the volume.
If you adjust the volume during voice guidance, the volume of the voice guidance
will change.
If you adjust the volume during a hands-free call, the conversation volume will
change.
 
Seek Switch 
(SEEK UP)/(SEEK DOWN)
Selecting a radio station
Radio stations saved to your Favorites can be selected by pressing the seek
switch while listening to FM/AM radio. The station will change to the previous or
next favorite station each time you press the seek switch. If you want to manually
tune to the next available station before or  after the currently selected station, press
and hold the seek switch until it beeps and the tuner will select the next available
station.
 
Playback Control
Music and video  files can be cued when listening to stored content via USB,
Bluetooth
®, and SiriusXM®*, audio, or video.
Other Equipment
Mazda Connect
*Some models.7-13
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04 
Page 497 of 687

NOTE
Complete the programming within
30 seconds.
8. Return to the vehicle and firmly press and hold the Homelink
button, and then release it after two
seconds have passed. Repeat the
“press/hold/release” sequence a
second time, and, depending on
the brand of the garage door
opener (or other rolling code
equipped device), repeat this
sequence a third time to complete
the programming process.
Press the programmed HomeLink
button and make sure that the
HomeLink System operates.
If the status indicator arrows are
flashing , refer to Programming
two-way communication.
1. Indicator light
For questions or comments, please
contact HomeLink at
www.homelink.com or
www.youtube.com/
HomeLinkGentex, or the HomeLink
toll-free hotline at 1-800-355-3515
(for calls placed outside of the USA,
Canada, and Puerto Rico,
international rates will apply and
may differ based on landline or
mobile phone).
Gate operator/Canadian
Programming
Canadian radio-frequency laws require
transmitter signals to “time-out” (or
quit) after several seconds of
transmission  ― which may not be long
enough for HomeLink to pick up the
signal during programming. Similar to
this Canadian law, some U.S. gate
operators are designed to “time-out”
in the same manner.
If you live in Canada or are having
difficulties programming a gate
operator by using the programming
procedures (regardless of where you
live), replace Step 4 of Programming
the HomeLink System with the
following:
NOTE
If programming a garage door opener
or gate operator, it is advised to unplug
the device during the “cycling” process
to prevent possible overheating.
While the indicator light is flashing in
amber, press the button on the
hand-held transmitter for 2 seconds
and release it repeatedly until the
indicator light changes from amber to
green.
Go back to Step 5 of Programming the
HomeLink System to complete the
procedure.
Operating the HomeLink System
Press the programmed HomeLink
button to operate a programmed
device.
Reprogramming the HomeLink system
To program a device to HomeLink
using a HomeLink button previously
trained, follow these steps:
1. Press and hold the desired
HomeLink button. Do not release
the button.
2. After 20 seconds, the indicator light
flashes in amber. After the indicator
light flashes, release the HomeLink
button.
Other Equipment
HomeLink Wireless Control System
7-70
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04 
Page 591 of 687

Inspecting BodyLubrication
All moving points of the body, such as
door and hood hinges and locks,
should be lubricated each time the
engine oil is changed. Use a
non-freezing lubricant on locks during
cold weather.
 
Make sure the hood's secondary latch
keeps the hood from opening when
the primary latch is released.
Inspection and Servicing/Cleaning
Engine Compartment Inspection
9-22
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04 
Page 611 of 687

Cell Phones.......................... 10-26Cell Phones Warning.......... 10-26
Uniform Tire Quality Grading System
(UTQGS).............................. 10-27 Uniform Tire Quality Grading
System (UTQGS)................ 10-27
Tread Wear........................ 10-27
Traction-AA, A, B, C........... 10-28
Temperature-A, B, C.......... 10-28
UNIFORM TIRE QUALITY
GRADING......................... 10-29
Tire Information (U.S.A.)........ 10-30 Tire Labeling...................... 10-30
Information on Passenger Vehicle
Tires.................................. 10-30
Information on Temporary
Tires.................................. 10-33
Location of the Tire Label
(Placard)........................... 10-34
Recommended Tire Inflation
Pressure............................ 10-34
Checking Tire Pressure........10-35
Glossary of Terms............... 10-36
Tire Maintenance............... 10-37
Tire Inflation Pressure......... 10-37
Tire Rotation...................... 10-38
Replacing a Tire................. 10-38
Safety Practices.................. 10-39
Vehicle Loading................. 10-40
Steps for Determining the Correct
Load Limit......................... 10-45
Declaration of Conformity..... 10-46 Keyless Entry System/Immobilizer
System.............................. 10-46
HomeLink Wireless Control
System.............................. 10-47Charging........................... 10-48
Tire Pressure Monitoring
System.............................. 10-49
Front Radar Sensor System ...........
........................................ 10-50
Front Side Radar Sensor System/
Rear Side Radar Sensor
System.............................. 10-51
Audio System.................... 10-52
Radio System..................... 10-54
Data Communication
System.............................. 10-55
Wireless Charger (Qi)......... 10-58
Identification Numbers.......... 10-59 Ve h i c l e  I d e n t i fi c a t i o n
Number............................ 10-59
Motor Vehicle Safety Standard
Label.................................10-59
Chassis Number................ 10-60
Vehicle Emission Control
Information Label.............. 10-60
Tire Pressure Label..............10-61
Engine Number..................10-61
Vehicle Specification............. 10-62 Engine...............................10-62
Charge System................... 10-63
High Voltage Battery...........10-64
Electrical System................ 10-65
Lubricant Quality............... 10-66
Capacities......................... 10-67
Dimensions....................... 10-68
Weights.............................10-69
Light Bulbs.........................10-70
Tires.................................. 10-71
10-2
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04 
Page 613 of 687

Customer Assistance
Your complete and permanent
satisfaction is our business. We are
here to serve you. All Authorized
Mazda Dealers have the knowledge
and the tools to keep your Mazda
vehicle in top condition.
If you have any questions or
recommendations for improvement
regarding the service of your Mazda
vehicle or servicing by Mazda Dealer
personnel, we recommend that you
take the following steps:
NOTE
If it becomes necessary to have the
components or wiring system for the
supplementary restraint system
modified to accommodate a person
with certain medical conditions in
accordance with a certified physician,
contact an Authorized Mazda Dealer.
For more informatio n, go to NHTSA
website www.safercar.gov (VEHICLE
SHOPPERS > Air Bags > Air Bag FAQs >
Air Bag Deactivation).
STEP 1: Contact Your
Mazda Dealer
Discuss the matter with an Authorized
Mazda Dealer. This is the quickest and
best way to address the issue.
If your concern has not been
resolved by the CUSTOMER
RELATIONS, SALES, SERVICE, or
PARTS MANAGER, then please
contact the GENERAL MANAGER of
the dealership or the OWNER.
If it becomes necessary to have the
components or wiring system for the
supplementary restraint systemmodified to accommodate a person
with certain medical conditions in
accordance with a certified
physician, go to STEP 2.
Specifications/Customer Information and Reporting Safety Defects
Customer Assistance (U.S.A.)
10-4
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04 
Page 618 of 687

Satisfaction ReviewProcess
Your complete and permanent
satisfaction is of primary concern to
Mazda. All Authorized Mazda Dealers
have both the knowledge and tools to
keep your Mazda in top condition. In
our experience, any questions,
problems, or complaints regarding the
operation of your Mazda or any other
general service transactions are most
effectively  resolved by your dealer. If
the cause of your dissatisfaction
cannot adequately be addressed by
normal dealership procedures, we
recommend that you take the
following steps:
STEP 1: Contact the
Mazda Dealer
Discuss the matter with a member of
dealership management. If the Service
Manager has already reviewed your
concerns, contact the owner of the
dealership or its General Manager.
Specifications/Customer Information and Reporting Safety Defects
Customer Assistance (Canada)
10-9
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04 
Page 619 of 687

STEP 2: Contact the
Mazda Regional Office
If you feel that you still require
assistance, ask the dealer Service
Manager to arrange for you to meet
the local Mazda Service
Representative. If more expedient,
contact Mazda Canada Inc. Regional
Office  nearest you for such
arrangements. Regional Office address
and phone numbers are shown (page
10-12).
STEP 3: Contact the
Mazda Customer
Relations Department
If still not substantially satisfied,
contact the Customer Relations
Department, Mazda Canada Inc., 55
Vogell Road, Richmond Hill, Ontario,
L4B 3K5 Canada  TEL: 1 (800)
263-4680.
Provide the Department with the
following information:
 
1. Your name, address and telephone number
2. Year and model of vehicle
3. Vehicle Identification Number (VIN). Refer to the Vehicle
Identification  Number on page
10-59 for the location of the VIN.
4. Purchase date
5. Present odometer reading
6. Your dealer's name and location
7. The nature of your problem and/or cause of dissatisfaction
 
The Department, in cooperation with
the local Mazda Service
Representative, will review the case to
determine if everything possible has
been done to ensure your satisfaction.
 
Please recognize that the resolution of
service problems in most cases
requires the use of your Mazda
dealer's service facilities, personnel
and equipment. We urge you to follow
the above three steps in sequence for
most effective results.
Specifications/Customer Information and Reporting Safety Defects
Customer Assistance (Canada)
10-10
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04 
Page 622 of 687

Customer Assistance
Your complete and permanent
satisfaction is our business. That is why
all Authorized Mazda Dealers have the
knowledge and the tools to keep your
Mazda vehicle in top condition.
If you have any questions or
recommendations for improvement
regarding the service of your Mazda
vehicle or servicing by Mazda Dealer
personnel, we recommend that you
take the following steps:
STEP 1
Discuss the matter with an Authorized
Mazda Dealer. This is the quickest and
best way to address the issue. If your
concern has not been resolved by the
CUSTOMER RELATIONS, SALES,
SERVICE, or PARTS MANAGER, then
please contact the GENERAL
MANAGER of the dealership or the
OWNER.
Specifications/Customer Information and Reporting Safety Defects
Customer Assistance (Puerto Rico)
10-13
CX-90_8KG7-EA-22L_Edition1_new2022-11-17 16:05:04