jump start MAZDA CX90 2024 Owners Manual

Winter Driving
Carry emergency gear, including tire
chains, window scraper, flares, a small
shovel, jumper cables, and a small bag
of sand or salt.
Ask an Authorized Mazda Dealer to
check the following:
Have the proper ratio of antifreeze in
the radiator.
Refer to Inspecting the Coolant on
page 9-14.
Inspect the battery and its cables.
Cold reduces battery capacity.
Use an engine oil appropriate for the
lowest ambient temperatures that
the vehicle will be driven in (page
9-18).
Inspect the ignition system for
damage and loose connections.
Use washer fluid made with
antifreeze―but do not use engine
coolant antifreeze for washer fluid
(page 9-17).
When driving on ice or in water, snow,
mud, sand, or similar hazards:
Be cautious and allow extra distance
for braking.
Avoid sudden braking and sudden
maneuvering.
Do not pump the brakes. Continue
to press down on the brake pedal.
Refer to Antilock Brake System (ABS)
on page 5-84.
If you get stuck, select a lower gear
and accelerate slowly. Do not spin
the rear wheels.
For more traction in starting on
slippery surfaces such as ice or
packed snow, use sand, rock salt,
chains, carpeting, or other nonslip
material under the rear wheels.
NOTE
Remove snow before driving. Snow
left on the windshield is dangerous
as it could obstruct vision.
Do not apply excessive force to a
window scraper when removing ice
or frozen snow on the mirror glass
and windshield.
Never use warm or hot water for
removing snow or ice from windows
and mirrors as it could result in the
glass cracking.
Drive slowly. Braking performance
can be adversely affected if snow or
ice adheres to the brake
components. If this situation occurs,
drive the vehicle slowly, releasing the
accelerator pedal and lightly applying
the brakes several times until the
brake performance returns to
normal.
Driving
Winter Driving
5-240
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Taking Action with Depleted Lead-acid Battery
The lead-acid battery might be depleted if the following conditions occur.
The hybrid system does not start.The selector lever cannot be shifted to a position other than P.The horn sound is weak or it does not sound.The brightness of the lights is extremely low.
Using commercially available booster cables, connect the lead-acid battery of the
booster vehicle’s battery to the lead-acid battery of your vehicle and start the hybrid
system.
Jump-starting is dangerous if done incorr ectly. Therefore, follow the procedure
carefully. If you feel unsure about jump-s tarting , we strongly recommend that you
have a competent service technician do the work.
WARNING
Read the following precautions carefully before using the lead-acid
battery or inspecting to ensure safe and correct handling.
Always wear eye protection when working near the lead-acid battery.
Working without eye protection is dangerous. Lead-acid battery fluid contains
SULFURIC ACID which could cause blindne ss if splashed into your eyes. Also,
hydrogen gas produced during normal lead-acid battery operation, could ignite and
cause the lead-acid battery to explode.
Wear eye protection and protective gloves to prevent contact with
lead-acid battery fluid.
Spilled lead-acid battery fluid is dangerous.
Lead-acid battery fluid contains SULFURIC ACID which could cause serious injuries if
it gets in eyes, or on the skin or clothing. If this happens, immediately flush your eyes
with water for 15 minutes or wash your skin thoroughly and get medical attention.
Always keep lead-acid batteries out of the reach of children.
Allowing children to play near lead-acid batteries is dangerous. Lead-acid battery
fluid could cause serious injuries if it gets in the eyes or on the skin.
What to Do in Case of Emergency
Engine Does Not Start
8-11
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Keep flames and sparks away from lead-acid battery cells and do not
allow metal tools to contact the positive (+) or negative (-) terminal of the
lead-acid battery when working near a lead-acid battery. Do not allow the
positive (+) terminal to contact the vehicle body.
Flames and sparks near lead-acid battery cells are dangerous. Hydrogen gas,
produced during normal lead-acid battery operation, could ignite and cause the
lead-acid battery to explode. An exploding lead-acid battery can cause serious burns
and injuries. Keep all flames including cigarettes and sparks away from lead-acid
battery cells.
Keep all flames and sparks away from lead-acid battery cells
because hydrogen gas is produced from le ad-acid battery cells while charging the
lead-acid battery or adding lead-acid battery fluid.
Flames and sparks near lead-acid battery cells are dangerous. Hydrogen gas,
produced during normal lead-acid battery operation, could ignite and cause the
lead-acid battery to explode. An exploding lead-acid battery can cause serious burns
and injuries. Keep all flames including cigarettes and sparks away from lead-acid
battery cells.
Do not jump-start a frozen lead-acid battery or one with a low fluid level.
Jump-starting a frozen lead-acid battery or one with a low fluid level is dangerous. It
may rupture or explode, causing serious injury.
Connect the negative cable to a good ground point away from the lead-acid
battery.
Connecting the end of the second jumper cable to the negative (–) terminal of the
depleted lead-acid battery is dangerous.
A spark could cause the gas around the lead-acid battery to explode and injure
someone.
Route the jumper cables away from parts that will be moving.
Connecting a jumper cable near or to moving part (cooling fans) is dangerous. The
cable could get caught when the hybrid system starts and cause serious injury.
CAUTION
Use only a 12 V booster system. You can damage a 12 V starter, ignition system,
and other electrical parts beyond repair with a 24 V power supply (two 12 V
batteries in series).
 Do not use your vehicle as a booster vehicle to prevent damaging your vehicle.
1. Make sure that the vehicle power is switched OFF.
What to Do in Case of Emergency
Engine Does Not Start
8-12
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

2. Remove the hole cover.Refer to Removing the hole cover in Inspecting Lead-acid battery on page 9-18.
3. Remove the lead-acid battery cover.
4. Turn off the booster vehicle's engine and connect the jumper cables in the following order.
Make sure that the jumper cables are se curely connected so that they do not
disconnect due to the vibrations.
1st lead
Positive (+) terminal on the depleted lead-acid battery
Positive (+) terminal on booster vehicle's battery
2nd lead
Negative (-) terminal on booster vehicle's battery
Location shown in the figure (do not connect to the negative (-) terminal of
the depleted lead-acid battery)
5. Start the booster vehicle's engine and rev the engine.
6. Start the hybrid system of your vehicle.
What to Do in Case of Emergency
Engine Does Not Start
8-13
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04