ECO mode MAZDA MIATA 1991 Factory Service Manual

MAZDA MIATA 1991 Factory Service Manual MIATA 1991 MAZDA MAZDA https://www.carmanualsonline.info/img/28/57064/w960_57064-0.png MAZDA MIATA 1991 Factory Service Manual

Page 127 of 392

MAZDA MIATA 1991  Factory Service Manual A double-lock mechanism is used on clockspring connectors. DO NOT use excessive force when 
disconnecting connectors, as damage to connector may occur.  
DISABLING & ACTIVATING AIR BAG SYSTEM 
AIR

Page 211 of 392

MAZDA MIATA 1991  Factory Service Manual 2. Release parking brake lever. Using a screwdriver, reach through parking brake handle hole in console and 
rotate adjusting screw until stroke is 6-8 notches. Ensure rear wheels rotate freely. Ensur

Page 212 of 392

MAZDA MIATA 1991  Factory Service Manual 4. On all models, measure applied pedal height. If distance is not as specified, check brake adjustment or 
system for air. See BRAKE PEDAL HEIGHT SPECIFICATIONS TABLE.  
BRAKE PEDAL HEIGHT SPECIFICAT

Page 228 of 392

MAZDA MIATA 1991  Factory Service Manual 2. To install, turn caliper piston clockwise using Disc Brake Piston Wrench (49-FA18-602) to retract caliper 
piston. Ensure groove in piston aligns with alignment pin on back of inner pad. To install

Page 314 of 392

MAZDA MIATA 1991  Factory Service Manual FUSES & CIRCUIT BREAKERS
Fuses & Circuit Breakers 1990-95 Mazda 
FUSES & CIRCUIT BREAKERS 
FUSE PANEL LOCATION 
Fuse box is located above drivers left knee, accessible through a removable cover. The

Page 319 of 392

MAZDA MIATA 1991  Factory Service Manual ANTI-LOCK BRAKE SYSTEM 
The anti-lock brake system contains electronic equipment that can be susceptible to interference caused by 
improperly installed or high output radio transmitting equipment. Si

Page 382 of 392

MAZDA MIATA 1991  Factory Service Manual MAZDA
1.6L & 1.8L 4-Cylinder - 1986-95 
MANUFACTURERS SUGGESTED SCHEDULED MAINTENANCE 
For 1992 and earlier model years, the manufacturer recommends the belt be replaced every 60,000 miles. For 
1993