remote start MAZDA MIATA 1991 Factory Service Manual

continuity does not exist, adjust or replace switch.
BENCH TESTS (ASSEMBLED)
NO-LOAD TEST
Connect fully-charged 12-volt battery, voltmeter and ammeter to starter. See Fig. 2
. Using remote starter wires
or jumper, engage solenoid. Starter should spin smoothly. Note/record meter readings and check no-load
specification. See NO-LOAD TEST SPECIFICATIONS table. If not within specification, disassemble and
inspect starter components.
NO-LOAD TEST SPECIFICATIONS
ApplicationSpecification
B2200 (M/T), Miata, Protege (M/T) & 323
Voltage11.5 Volts
Current60 Amps Maximum
Shaft Speed6500 RPM

1991 Mazda MX-5 Miata
STARTER - DIRECT DRIVE 1990-92 ELECTRICAL Mazda Starters - Direct Drive
Microsoft
Sunday, July 05, 2009 2:13:20 PMPage 3 © 2005 Mitchell Repair Information Company, LLC.