bonnet MAZDA MODEL 3 HATCHBACK 2015 Quick Guide (in English)

7
When Driving
For details, refer to Section 4, “Start/Stop Engine”.
i-stop OFF Switch
The i-stop function can be turned off by
pressing the switch until the beep sounds and
the i-stop warning light (amber) in the
instrument cluster illuminates.
The i-stop function can be turned back on by
pressing the switch again until the beep sounds
and the i-stop warning light (amber) turns off.
i-stop Warning Light, Beep
If a system malfunction occurs or system operation precautions are necessary, the
driver is notified by the warning beep and warning light in the instrument cluster.
Warning light/beep Verification
The i-stop warning light (amber) and
other warning lights illuminate while
the i-stop function is operating.
The i-stop warning light (amber)
flashes. The i-stop system may have some
kind of malfunction.
The i-stop indicator light (green)
flashes twice per second while the
i-stop function is operating. (Manual transaxle)
Check whether the shift lever is in the
neutral position. Have your vehicle inspected by an
expert repairer, we recommend an
Authorised Mazda Repairer as soon
as possible. Check whether the bonnet is open,
the driver's seat belt is unfastened, or
the driver's door is open.
If this is the case, the engine will not
automatically restart for safety
reasons.
Start the engine using the normal
method.
The warning beep sounds, and the
i-stop indicator light (green) flashes
twice per second (European model)
while the i-stop function is operating.Check whether the driver's door is
closed.
/C\FCA'(''.A'FKVKQPA3WKEM)WKFGKPFD

If Trouble Arises
24
If Trouble Arises
• Flat Tyre
If you have a flat tyre, drive slowly to a level spot that is well off the road and
out of the way of traffic to change the tyre.
In the event of a flat tyre, use the emergency flat tyre repair kit to repair the tyre
temporarily or use the temporary spare tyre.
• Overheating
1. Drive safely to the side of the road and park off the right-of-way.
2. Check whether coolant or steam is escaping from the engine compartment.
If steam is coming from the engine compartment:
Do not go near the front of the vehicle. Stop the engine.
Wait until the steam dissipates, then open the bonnet and start the engine.
If neither coolant nor steam is escaping:
Open the bonnet and idle the engine until it cools.
• Towing Description
We recommend that towing be done only by an expert repairer, we recommend
an Authorised Mazda Repairer or a commercial tow-truck service.
• Warning Lights and Warning Sounds
If a warning light illuminates or flashes or a warning sound is heard, check for
details concerning the warning light or sound in this guide. If the problem
cannot be resolved, contact an Authorised Mazda Repairer.
For details, refer to Section 7, “Flat Tyre”, “Overheating”, “Emergency Towing” or
“Warning/Indicator Lights and Warning Sounds”.
/C\FCA'(''.A'FKVKQPA3WKEM)WKFGKPFD